Slimline Bunded Oil Tanks

Our 450 litre bunded heating oil tank is manufactured in our factory in the North East of England from mild steel plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and oils.

This self bunding steel oil tank is manufactured to comply with all current regulations. The inner and outer tanks are constructed from mild steel plate to BS EN 10025.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.

Included with this Bunded Heating Oil Tank is -

Tank Contents Gauge

2" BSP Fill Point with Cap

2" BSP Tank Vent with Cap

1" BSP Bottom Outlet (Top outlet on request)

1 1/2" Spare socket into bund for contents gauge

Top Lift points (Lift empty only)

10 Year Guarantee

Our 650 litre bunded heating oil tank is manufactured in our factory in the North East of England from mild steel plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and oils.

This self bunding steel oil tank is manufactured to comply with all current regulations. The inner and outer tanks are constructed from mild steel plate to BS EN 10025.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.

Included with this Bunded Heating Oil Tank is -

Tank Contents Gauge

2" BSP Fill Point with Cap

2" BSP Tank Vent with Cap

1" BSP Bottom Outlet (Top outlet on request)

1 1/2" Spare socket into bund for contents gauge

Top Lift points (Lift empty only)

10 Year Guarantee

This 650-litre capacity slimline environment-friendly bunded oil tank is suitable for the storage of heating oil in a domestic or commercial set up. It’s ideal for use when space is at a premium and additional tank technology is not a requirement.

Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing. Moulded in handles allow for the tank to be transported quite easily.

The Harlequin 650HQI comes complete with -

Integrally bunded

Bottom outlet with 1" BSP(F) thread

16" lockable access lid

4" lockable inspection cap

2" fill point

32mm hole with cover for electronic gauge

10 Year Guarantee

This 650 Litre Rototek 3C Centurion Bunded Oil Tank is ideal for the safe, secure and environmentally responsible storage of heating oil. Rotationally moulded in the United Kingdom from a high grade Medium Density Polyethylene which is tough, durable and UV Stabilised to prevent colour fade.

The tanks come fully assembled and with an optional installation kit, making the tank simple and ready to install by an approved engineer.*

*Please note that all oil tanks should be installed by a suitably competent person in accordance with statutory requirements.

These bunded oil tanks come with a 10 year warranty if installed by an Oftec Approved Engineer and subsequently inspected annually by an Oftec Approved Engineer.

Standard fittings and parts supplied with the tank:

1” BSP Bottom Outlet

2 x 2 Inch Vents

Lockable Manhole Lid

4” Inspection aperture with lockable screw cap

Optional Fittings:

Apollo Bund alarm with plug in receiver

Float Level Gauge

Atkinson Installation Kit Comprising of:

1-0.5 inch reducer

Fuel Filter with lever type isolation valve

PTFE and Heldite thread sealant

This 650 litre capacity slimline environment-friendly bunded oil tank from Harlequin is suitable for the storage of heating oil in a place where space is at a premium. Equipped with a range of fittings, including a smart contents gauge with a smartphone app and bottom outlet fitting kit this bottom outlet tank provides a complete solution for a fully compliant installation.

Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing.

Integrally bunded

Bottom outlet with 1" BSP(F) thread

16" lockable access lid

4" lockable inspection cap

2" fill point

32mm hole with cover for electronic gauge

Smart contents gauge

Bottom outlet fitting kit

LRC overfill prevention probe

Inner tank vent

This 650 litre capacity slimline environment-friendly bunded oil tank by Harlequin is suitable for the storage of heating oil in a domestic or commercial set up where space is at a premium. Equipped with a range of fittings, including a smart contents gauge with a smartphone app and Tanktop top offtake fitting this top outlet tank provides a complete solution for a fully compliant installation.

Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing.

The Harlequin 650ITT comes complete with -

Atkinson Tanktop top offtake fitting (c/w integral anti-siphon valve, non-return valve, 50Mic filter & priming button)

16" lockable access lid

4" lockable inspection cap

2" BSP fill point

32mm hole with cover for electronic gauge

Ultrasonic contents gauge

LRC overfill prevention probe

Inner tank vent

Moulded-in handles

10 year guarantee

Backed by a 10 year guarantee, this Plastic Bunded Heating Oil Tank by ATLAS is designed & Manufactured in Britain for a long lasting solution to your oil storage needs. 

The Atlas 650BSA comes complete with -

Bottom Outlet Kit

Overfill Prevention Valve

Watchman Sonic Gauge

4" Insepction Screw Lid

2" Tank Vent

Lockable Lid

10 year guarantee

Tuffa Tanks 1,000 Litre fire protected heating oil tanks are manufactured in the UK from 3mm Mild steel. With a life expectancy of 30 years, they provide an economical solution to suit most installations.&

These Tanks come complete with:

Integral 30 or 60 Minute fire Protection

2" BSP Fill point with Cap & Chain

Overfill Prevention Valve

1" BSP Bottom outlet

Float Level Clock Gauge

Watchman Sonic Gauge

Central Lifting Eye

Channel Runners

Bottom Outlet Fitting Kit

Green RAL6005 Paint finish

Tuffa's fire-protected oil tanks come fitted with an integral bund as standard and are LABC Certified. This means they can be located within 1,800mm of a window, shed and flue outlet, or within 760mm of a non-fire rated boundary (eg. wooden fence)

Tuffa's Steel Bunded Fire-Protected Oil Tanks must be installed to building standards.

Fire Protection

Domestic: 

30 minute fire protection – install a domestic tank adjacent to buildings and boundaries

60 minute fire protection – install a domestic tank inside an uninhabited building such as a garage (pending installer/inspector approval)

Non-Domestic:

60 minute fire protection – install a non-domestic tank adjacent to buildings and boundaries

Tuffa’s fire protected oil tanks serve as an alternative means of compliance when compared to traditional fire barriers. Tuffa’s fire protected tank system has LABC certification proving compliance with local authorities across Britain. However, it is the responsibility of the Competent Person installing the tank, or the building inspector certifying the installation, to ensure a site-specific risk assessment has been conducted.

30 minute fire protection - Enables the installation of an oil tank a minimum of 300mm from other buildings and structures. Where access is required, then a minimum distance of 600mm is required.

60 minute fire protection - Enables the installation of an oil tank within a garage or other internal space where it is impractical to install the tank externally to the building. The tank must be installed in an uninhabitable area (e.g. a garage or outbuilding), at the lowest possible level in the building or structure. Additionally, the tank must be installed a minimum of 300mm from other internal walls and structures or 600mm where access is required.

This 1000 Litre Rototek 3C Centurion Bunded Oil Tank is ideal for the safe, secure and environmentally responsible storage of heating oil. Rotationally moulded in the United Kingdom from a high grade Medium Density Polyethylene which is tough, durable and UV Stabilised to prevent colour fade.

The tanks come fully assembled and with an optional installation kit, making the tank simple and ready to install by an approved engineer.*

*Please note that all oil tanks should be installed by a suitably competent person in accordance with statutory requirements.

These bunded oil tanks come with a 10 year warranty if installed by an Oftec Approved Engineer and subsequently inspected annually by an Oftec Approved Engineer.

Standard fittings and parts supplied with the tank:

1” BSP Bottom Outlet

2 x 2 Inch Vents

Lockable Manhole Lid

4” Inspection aperture with lockable screw cap

Optional Fittings:

Apollo Bund alarm with plug in receiver

Float Level Gauge

Atkinson Installation Kit Comprising of:

1-0.5 inch reducer

Fuel Filter with lever type isolation valve

PTFE and Heldite thread sealant

Diamond tanks are manufactured by Harlequin MFG and meet all regulatory requirements as well as being fully bunded.

Excellent Design - specially designed for those awkward installations, the range boasts super slimline options along with handles for easy moving and heavy duty lids on all models.

Integrally Bunded - designed to protect the surrounding environment, all tanks are bunded preventing polution if the internal tank was ever to leak.

Non Corrosive - manufactured from Medium Density Polyethylene (MDPE) your Harlequin tank will not corrode.

10 Year Guarantee (upon registration with Harlequin)

Meets Regulations - as well as being fully bunded, each tank meets all relevant regulatory requirements.

Contents Monitoring - each model has a 32mm hole suitable for fitting an electronic gauge, also available as an optional extra.

Harlequin Tanks are the leading manufacturer of plastic rotationally moulded tanks, their knowledge and expertise allow them to manufacture the highest quality plastic tanks and affordable prices.

This 1000-litre capacity slimline environment-friendly bunded oil tank is suitable for the storage of heating oil in a domestic or commercial set up. It’s ideal for use when space is at a premium and additional tank technology is not a requirement.

Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing. Moulded in handles allow for the tank to be transported quite easily.

The Harlequin 1000HQI Comes compelte with -

Integrally bunded

Bottom outlet with 1" BSP(F) thread

16" lockable access lid

4" lockable inspection cap

2" fill point

32mm hole with cover for electronic gauge

Inner tank vent

10 Year Guarantee

This 1000 litre capacity slimline environment-friendly bunded oil tank from Harlequin is suitable for the storage of heating oil in a place where space is at a premium. Equipped with a range of fittings, including a smart contents gauge with a smartphone app and bottom outlet fitting kit this bottom outlet tank provides a complete solution for a fully compliant installation.

Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing.

Integrally bunded

Bottom outlet with 1" BSP(F) thread

16" lockable access lid

4" lockable inspection cap

2" fill point

32mm hole with cover for electronic gauge

Ultrasonic contents gauge

Bottom outlet fitting kit

LRC overfill prevention probe

Inner tank vent