Solenoid Valve

This Stainless Steel Solenoid Valve is a direct acting valve, meaning that no pressure has to be applied to operate, suitable for a range of fluids including AdBlue™, fuels, oil and water. As a normally closed solenoid valve, the liquid flow is shut off until the valve is activated. When the coil integral to the valve becomes energised by an electrical current, the valve opens to enable the flow of liquid through the pipeline.

This stainless steel solenoid valve is therefore designed for situations where the fluid only needs to be released at certain intervals, for example to feed a generator with fuel from the back up storage tank. The valve could also be wired into a pump to make sure that fluid only enters the pipework from the tank when the pump is activated.

This Brass Solenoid Valve is a direct acting valve, meaning that no pressure needs to be applied to operate, for a range of fluids including fuels, oils and water. As a normally closed solenoid valve, until the valve is activated the fluid flow is shut off. When the electrical current that runs through the coil inside the valve is energised, the valve opens and allows the flow of liquid through the pipework.

This brass solenoid valve is therefore designed for applications where fluid only needs to be released on occasions, such as to feed a generator with diesel from the back up storage tank. It could also be wired into a pump ensuring that fuel only enters the pipework from the tank when the pump is turned on.