1000 Litre Bunded Oil Tanks

The 900 litre bunded heating oil tank from Carbery is an ideal choice for small domestic installations thanks its super slim profile, relatively low weight and 900 litre capacity.

All Carbery bunded tanks come backed by a 10 year warranty and free delivery (exclusions apply, please see below)

This tank is EN13341 Compliant, OFCERT approved and manufactured to ISO Standards.

Supplied with -

• 2” lockable oil tank fill point
• 5” lockable oil tank inspection point
• 2” fuel tank vent
• Lockable access lid
• 32mm electronic gauge point
• Contents Dipstick
• 1” BSP bottom outlet

Free delivery on Carbery Tanks includes delivery within mainland UK, but excludes the following postcodes - AB, BT, DD, DG, EH, FK, G, HS, IM, IV, KA, KW, KY, ML, PA, PH, TD, TR and ZE. Please contact us for delivery costs to these postcode areas.

The 1100 litre bunded heating oil tank from Carbery is an ideal choice for small domestic installations thanks its super slim profile, relatively low weight and 1100 litre capacity.

All Carbery bunded tanks come backed by a 10 year warranty and free delivery (exclusions apply, please see below)

This tank is EN13341 Compliant, OFCERT approved and manufactured to ISO Standards.

Supplied with -

• 2” lockable oil tank fill point
• 5” lockable oil tank inspection point
• 2” fuel tank vent
• Lockable access lid
• 32mm electronic gauge point
• Contents Dipstick
• 1” BSP bottom outlet

Free delivery on Carbery Tanks includes delivery within mainland UK, but excludes the following postcodes - AB, BT, DD, DG, EH, FK, G, HS, IM, IV, KA, KW, KY, ML, PA, PH, TD, TR and ZE. Please contact us for delivery costs to these postcode areas.

The 1000 litre bunded heating oil tank from Carbery is an ideal choice for small domestic installations thanks its super slim profile, relatively low weight and 1000 litre capacity.

All Carbery bunded tanks come backed by a 10 year warranty and free delivery (exclusions apply, please see below)

This tank is EN13341 Compliant, OFCERT approved and manufactured to ISO Standards.

Supplied with -

• 2” lockable oil tank fill point
• 5” lockable oil tank inspection point
• 2” fuel tank vent
• Lockable access lid
• 32mm electronic gauge point
• Contents Dipstick
• 1” BSP bottom outlet

Free delivery on Carbery Tanks includes delivery within mainland UK, but excludes the following postcodes - AB, BT, DD, DG, EH, FK, G, HS, IM, IV, KA, KW, KY, ML, PA, PH, TD, TR and ZE. Please contact us for delivery costs to these postcode areas.

This 1000 litre plastic bunded oil tank is designed for the safe storage of heating oil in domestic and commercial environments. Thanks to its slimline design it's ideal for use where there isn't much space available.

The oil tank is rotationally moulded from medium density polyethylene (MDPE) making it lightweight, durable and corrosion resistant. The tank fully complies with all neccasary regulations and guidelines.

Specification -

16" Diameter lockable access lid

4" Lockable inspection port

2" Steel fill point with cap

32mm pre-drilled hole for electronic gauges

Inner tank vent

10 year warranty

Moulded in lifting handles

1" BSP bottom outlet fitting

Our 1100 litre bunded heating oil tank is manufactured in our factory in the North East of England from mild steel plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and oils.

This self bunding steel oil tank is manufactured to comply with all current regulations. The inner and outer tanks are constructed from mild steel plate to BS EN 10025.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.

Included with this Bunded Heating Oil Tank is -

Tank Contents Gauge

2" BSP Fill Point with Cap

2" BSP Tank Vent with Cap

1" BSP Bottom Outlet (Top outlet on request)

1 1/2" Spare socket into bund for contents gauge

Top Lift points (Lift empty only)

10 Year Guarantee

Tuffa Tanks 1,100 Litre Bunded Heating Oil Tanks are manufactured in the UK from 3mm Mild steel. With a life expectancy of 30 years, they provide an economical solution to suit most installations. 

These Tuffa Tanks come complete with:

Bunded construction

2” BSP fill connection with cap & chain

Overfill prevention valve

Vent

Float level gauge

1” BSP female bottom outlet

2” BSP spare socket

Tank pack (1” - 1/2” adaptor, ball valve & filter)

Channel runners

Central lifting eye

Primed & painted in RAL 6005 Green

Tuffa Tanks 900 Litre Bunded Heating Oil Tanks are manufactured in the UK from 3mm Mild steel. With a life expectancy of 30 years, they provide an economical solution to suit most installations. 

These Tanks come complete with:

Bunded construction

2” BSP fill connection with cap & chain

Overfill prevention valve

Vent

Float level gauge

1” BSP female bottom outlet

2” BSP spare socket

Tank pack (1” - 1/2” adaptor, ball valve & filter)

Channel runners

Central lifting eye

Primed & painted in RAL 6005 Green

Tuffa Tanks 1,100 Litre fire protected heating oil tanks are manufactured in the UK from 3mm Mild steel. With a life expectancy of 30 years, they provide an economical solution to suit most installations. 

These Tanks come complete with:

Integral 30 or 60 Minute fire Protection

2" BSP Fill point with Cap & Chain

Overfill Prevention Valve

1" BSP Bottom outlet

Float Level Clock Gauge

Watchman Sonic Gauge

Central Lifting Eye

Channel Runners

Bottom Outlet Fitting Kit

Green RAL6005 Paint finish

Tuffa's fire-protected oil tanks come fitted with an integral bund as standard and are LABC Certified. This means they can be located within 1,800mm of a window, shed and flue outlet, or within 760mm of a non-fire rated boundary (eg. wooden fence)

Tuffa's Steel Bunded Fire-Protected Oil Tanks must be installed to building standards.

Fire Protection

Domestic: 

30 minute fire protection – install a domestic tank adjacent to buildings and boundaries

60 minute fire protection – install a domestic tank inside an uninhabited building such as a garage (pending installer/inspector approval)

Non-Domestic:

60 minute fire protection – install a non-domestic tank adjacent to buildings and boundaries

Tuffa’s fire protected oil tanks serve as an alternative means of compliance when compared to traditional fire barriers. Tuffa’s fire protected tank system has LABC certification proving compliance with local authorities across Britain. However, it is the responsibility of the Competent Person installing the tank, or the building inspector certifying the installation, to ensure a site-specific risk assessment has been conducted.

30 minute fire protection - Enables the installation of an oil tank a minimum of 300mm from other buildings and structures. Where access is required, then a minimum distance of 600mm is required.

60 minute fire protection - Enables the installation of an oil tank within a garage or other internal space where it is impractical to install the tank externally to the building. The tank must be installed in an uninhabitable area (e.g. a garage or outbuilding), at the lowest possible level in the building or structure. Additionally, the tank must be installed a minimum of 300mm from other internal walls and structures or 600mm where access is required.

Tuffa Tanks 900 Litre fire protected heating oil tanks are manufactured in the UK from 3mm Mild steel. With a life expectancy of 30 years, they provide an economical solution to suit most installations. 

These Tanks come complete with:

Integral 30 or 60 Minute fire Protection

2" BSP Fill point with Cap & Chain

Overfill Prevention Valve

1" BSP Bottom outlet

Float Level Clock Gauge

Watchman Sonic Gauge

Central Lifting Eye

Channel Runners

Bottom Outlet Fitting Kit

Green RAL6005 Paint finish

Tuffa's fire-protected oil tanks come fitted with an integral bund as standard and are LABC Certified. This means they can be located within 1,800mm of a window, shed and flue outlet, or within 760mm of a non-fire rated boundary (eg. wooden fence)

Tuffa's Steel Bunded Fire-Protected Oil Tanks must be installed to building standards.

Fire Protection

Domestic: 

30 minute fire protection – install a domestic tank adjacent to buildings and boundaries

60 minute fire protection – install a domestic tank inside an uninhabited building such as a garage (pending installer/inspector approval)

Non-Domestic:

60 minute fire protection – install a non-domestic tank adjacent to buildings and boundaries

Tuffa’s fire protected oil tanks serve as an alternative means of compliance when compared to traditional fire barriers. Tuffa’s fire protected tank system has LABC certification proving compliance with local authorities across Britain. However, it is the responsibility of the Competent Person installing the tank, or the building inspector certifying the installation, to ensure a site-specific risk assessment has been conducted.

30 minute fire protection - Enables the installation of an oil tank a minimum of 300mm from other buildings and structures. Where access is required, then a minimum distance of 600mm is required.

60 minute fire protection - Enables the installation of an oil tank within a garage or other internal space where it is impractical to install the tank externally to the building. The tank must be installed in an uninhabitable area (e.g. a garage or outbuilding), at the lowest possible level in the building or structure. Additionally, the tank must be installed a minimum of 300mm from other internal walls and structures or 600mm where access is required.

Manufactured in Ireland from UV Stabilised Polyethylene, Titan's EcoSafe range of Bunded Oil Tanks are some of the most advanced Plastic Oil Tanks on the market. 

This Titan ES1000 Comes complete with -

Watchman Sonic Alarm

2" Overfill Prevention Valve (Factory fitted)

1" BSP Bottom Outlet (Top outlet available on request)

Bottom Outlet Kit - Isolation Valve & Filter, Thread Sealant and PTFE Tape

4" Inspection Lid

Tank Vent

Lockable Manhole Lid

10 Year warranty

Manufactured in Ireland from UV Stabilised Polyethylene, Titan's EcoSafe range of Bunded Oil Tanks are some of the most advanced Plastic Oil Tanks on the market. 

This Titan ESSL1000 Comes complete with -

Watchman Sonic Alarm

2" Overfill Prevention Valve (Factory fitted)

1" BSP Bottom Outlet (Top outlet available on request)

Bottom Outlet Kit - Isolation Valve & Filter, Thread Sealant and PTFE Tape

4" Inspection Lid

Tank Vent

Lockable Manhole Lid

10 Year warranty

This 1000 Litre Rototek 3C Centurion Bunded Oil Tank is ideal for the safe, secure and environmentally responsible storage of heating oil. Rotationally moulded in the United Kingdom from a high grade Medium Density Polyethylene which is tough, durable and UV Stabilised to prevent colour fade.

The tanks come fully assembled and with an optional installation kit, making the tank simple and ready to install by an approved engineer.*

*Please note that all oil tanks should be installed by a suitably competent person in accordance with statutory requirements.

These bunded oil tanks come with a 10 year warranty if installed by an Oftec Approved Engineer and subsequently inspected annually by an Oftec Approved Engineer.

Standard fittings and parts supplied with the tank:

1” BSP Bottom Outlet

2 x 2 Inch Vents

Lockable Manhole Lid

4” Inspection aperture with lockable screw cap

Optional Fittings:

Apollo Bund alarm with plug in receiver

Float Level Gauge

Atkinson Installation Kit Comprising of:

1-0.5 inch reducer

Fuel Filter with lever type isolation valve

PTFE and Heldite thread sealant