650 Litre Harlequin ITT Slimline Bunded Oil Tank - Top Outlet

Manufactured in the UK from Mild Steel Plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and light oils.

Included with this Bunded Oil Tank is -

Bund Gauge

Tank Contents Gauge

2" BSP Fill Point with Cap

2" BSP Tank Vent with Cap

1" BSP Base feed with Isolation Valve

Top Lift points (Lift empty only)

1" BSP Spare socket into bund

10 Year Guarantee

This self bunding, steel oil storage tank is manufactured to comply with all current regulations.
Suitable for above ground instillations at Domestic, Commercial, Agricultural and industrial locations for storage of Paraffin, Kerosene, diesel oils and light lubricant oils.

Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.

Manufactured in the UK from Mild Steel Plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and light oils.

Included with this Bunded Oil Tank is -

Bund Gauge

Tank Contents Gauge

2" BSP Fill Point with Cap

2" BSP Tank Vent with Cap

1" BSP Base feed with Isolation Valve

Top Lift points (Lift empty only)

1" BSP Spare socket into bund

10 Year Guarantee

This self bunding, steel oil storage tank is manufactured to comply with all current regulations.
Suitable for above ground instillations at Domestic, Commercial, Agricultural and industrial locations for storage of Paraffin, Kerosene, diesel oils and light lubricant oils.

Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.

This 350-litre capacity vertical environment-friendly bunded oil tank is suitable for the storage of heating oil in a domestic or commercial set up. It's ideal for use when additional tank technology is not a requirement. Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing.

The Harlequin 350HQI Comes complete with -

Integrally bunded

Bottom outlet with 1" BSP(F) thread

4" lockable inspection/fill cap

32mm hole with cover for electronic gauge

Inner tank vent

10 Year guarantee

Backed by a 10 year guarantee, this Plastic Bunded Heating Oil Tank by ATLAS is designed & Manufactured in Britain for a long lasting solution to your oil storage needs. 

The Atlas 650BSA comes complete with -

Bottom Outlet Kit

Overfill Prevention Valve

Watchman Sonic Gauge

4" Insepction Screw Lid

2" Tank Vent

Lockable Lid

10 year guarantee