Transfer Pumps

The Piusi IBC Mounted Oil Transfer Pump Kits are a range of Viscomat pumps fitted to plate designed specifically for dispensing oil from an IBC. Depending upon the viscocity of the oil and flow rate required, there are options of either the Piusi Viscomat 70, 90 or Flowmat oil pumps. These kits come supplied with a Viscomat pump, IBC mounting plate, manual shut off nozzle, oil flow meter and 4 metre delivery hose.

These kits aren't supplied with a suction connector and so this would need to be purchased separately.

The Piusi 3000 Supreme is a highly innovative device designed to offer full pump control and management from a smartphone app, thus helping users fill up with diesel from mobile tanks quickly and safely.

The Piusi 3000 Supreme is a compact, self-priming vane pump with a flow rate of up to 50 litres per minute. Thanks to its compact design, the Piusi 3000 supreme is easy to install on virtually any tank.

The Piusi smart pump will only turn on and dispense fuel to authorised smartphone app holders, which secures the fuel when a site is left out of hours. Giving you the ability to record dispensing data including quantity of fuel taken, and date and time, this refuelling pump provides a greater handle on how your fuel is being used and help to spot anomalies.

The Piusi 3000 Supreme intelligent pump manages its own operation to save time and eliminate causes of pump failure often associated with mobile tanks. Users and managers can pre-set the number of litres to dispense, reduce flow rate for filling jerry cans. The diesel transfer pump will automatically stop running if your tank runs out of fuel to protect itself from dry run damage. The pump can slow its own motor down to prevent overheating, allowing it to be continuously run unlike other battery powered models.

As standard the Supreme pump can have 2 users and stores the last 20 transactions on the app. By upgrading to the PRO you can have 10 users and the last 100 transactions can be stored on the app or can be downloaded to CSV file.

Multiple Piusi 3000 Supreme pumps can be integrated with the Piusi B.SMART cloud based fuel management software, meaning you can monitor mobile fuel tanks across unlimited sites remotely through a single online portal. This also allows up to 500 users and unlimited transactions to be stored and downloaded to CSV file.

Part of the ALPHA family of fuel dispenders, the ALPHA Petrol pump is a forecourt sytyle petrol dispenser designed for refilling fleets of vehicles.

The unit can easiliy be connected to an externam fuel management system, or be supplied with the comprehensive FC10 management system. Please contact us for a quote.

ALPHA Petrol specification -

1450mm H x 550mm W x 490mm D

4 Piston meter (+/- 0.25% accuracy)

Belt driven ATEX petrol pump

Stainless steel cabinet with seperate top housing for display

LCD Display with back light. Shows up to 99,999.9 litres, totaliser shows up to 99,999,999 litres

10:1 or 100:1 Pulser output for simple connection to fuel management systems

3.66m Steel braided fuel hose (12ft) (Nozzle not included)

 The ALPHA pump range are heavy duty ATEX certified diesel pumps which can be equipped with the comprehensive FC10 fuel management system, or easily be connected to a different system. Thanks to its robust construction, the ALPHA pumps will last years in service and are simple to maintain.

The unit can be modified to allow the holster to be mounted on either side, or the front of the unit.

Standard ALPHA pump specification -

4 Piston Flow Meter - +/- 0.25% Accuracy

LCD Display with back light. Shows up to 99,999.9 litres, totaliser shows up to 99,999,999 litres.

Uses virtually indestructable key tags - up to 65,000 on a system

Vehicle tag, odometer entry, odometer check & MPG calculation

Optional driver code &/or pin code entry 

GPRS modem for remote access

Web based software

Flexible report writer enables a wide range of fuel usage analysis by vehicle, department, vehicle type, fuel type, time & date 

Includes CO2 output readings

Multiple site capability & data consolidation

All features included as standard. No optional extras to purchase

Mobile app available for monitoring on phone or tablet

 The ALPHA pump range are heavy duty ATEX certified diesel pumps which can be equipped with the comprehensive FC10 fuel management system, or easily be connected to a different system. Thanks to its robust construction, the ALPHA pumps will last years in service and are simple to maintain.

The unit can be modified to allow the holster to be mounted on either side, or the front of the unit.

Standard ALPHA pump specification -

4 Piston Flow Meter - +/- 0.25% Accuracy

Belt driven pump unit

Stainless steel lockable cabinet with base mounting holes

LCD Display with back light. Shows up to 99,999.9 litres, totaliser shows up to 99,999,999 litres.

Integral 10:1 or 100:1 pulser transmitter for simple connection to fuel management systems

3.66m (12ft) Steel braided hose (No nozzle)

Options for 50, 70 or 90 litres per minute flow rates

ATEX Certificate Number - CML 15ATEX9183

The Pedrollo TOP MULTI-AD is a high quality multi stage submersible pump manufactured in Italy. The TOP MULTI-AD is designed to pump clean liquid which is defined according to ISO 22241 as AUS 32 (Aqueous Urea Solution 32.5%).

This liquid is equivalent to other commercial trademarks known as - AdBlue, DEF & Arla 32.

Delivery Body - Glass fibre reinforced technopolymer, complete with threaded ports in compliance with ISO 228/1.

Suction Filter - Glass fibre reinforced technopolymer.

Stage Casing - Glass fibre reinforced technopolymer.

Impeller - Noryl FE1520PW.

Diffuser - Noryl FE1520PW with anti-wear ring.

Vane Diffuser - Glass fibre reinforced technopolymer.

Motor Casing - Stainless Steel AISI 304.

Motor Casing Plate - Stainless Steel AISI 304.

Motor Shaft - Stainless Steel AISI 304.

Shaft with Double Seal - Silicone Carbide (stationary ring), Graphite (rotational ring) & EPDM

Outlet - 11/4" F BSP with Flap-check valve

The Pedrollo PLURIJET 6/90X is a self priming, multi-stage pump manufactured in Italy. The PLURIJET series are suitable for use with Clean water that doesn't contain any particles or with any liquids that aren't aggressive towards the materials the pump is made from.

Due to their silence, reliability & low power consumption, the PLURIJET 90 is recommended for domestic & civil applications, in particular for pressurising and distributing water in combination with pressure tanks.

Pump Body - Stainless steel AISI 304 complete with threaded ports in compliance with ISO 228/1

Body Backplate - Stainless steel AISI 304

Impellers - Noryl FE1520PW

Diffusers - Stainless steel AISI 304

Motor Shaft - Stainless steel EN10088-3 - 01.4104

Mechanical Seal - Graphite (stationary ring), Ceramic (rotational ring) & NBR

Inlet - 1-1/4 " F BSP

Outlet - 1" F BSP

The SAMOA Flowstar 230v oil transfer pump kit is an external gear pump of use with lubrication oils. Available with a 10 or 24 bar pump, this mains powered oil pump kit comes with 3 metre delivery hose, a metered control gun and a 3 metre suction hose with foot valve.

The metered control nozzle has an integrated flow meter which has a high accuracy of +/- 0.5%. The nozzle valve has a cam actuated piston-valve, designed for unrestricted flow and superb control of the fluid being dispensed.

The SAMOA Flowstar DC oil transfer pump kit is an external gear pump of use with lubrication oils. Available with 12v or 24v motors, this battery powered oil pump kit comes with 3 metre delivery hose, a control gun and a 3 metre suction hose with foot valve.

If selected, the metered nozzle has an integrated flow meter which has a high accuracy of +/- 0.5%. The nozzle valve has a cam actuated piston-valve, designed for unrestricted flow and superb control of the fluid being dispensed.

The SAMOA flowstar electric oil dispensing trolley is a mobile unit ideal for delivering oil frm a drum to anywhere in the workshop. The unit is comprimised of a trolley, fitted with a self priming gear pump, 3 metre suction hose, 3 metre delivery hose and a metered dispensing nozzle.

The nozzle itself has an integrated flow meter which has a high accuracy of +/- 0.5%. The nozzle valve has a cam actuated piston-valve, designed for unrestricted flow and superb control of the fluid being dispensed.

The SAMOA Flowstar DC portable oil transfer pump is an external gear pump of use with lubrication oils. Available with 12v or 24v motors, this external gear oil pump is compact and easy to install. Thanks to their small size, they can be installed as mobile oil pumps on vehicles, or fitted onto trolleys to be used where mains electricity is not available.

The SAMOA Flowstar series of oil transer pumps are high pressure gear pumps designed for use with medium-high viscosity lubricating oils. Thanks to its sintered steel gears the flowstar series of oil pumps are long lasting and reliable.

Models with electronic pressure switch start automatically whenever a pressure drop in the distribution line occurs (i.e. when a delivery gun is opened) and stops once pressure is built up in the line (i.e. when a delivery gun is closed).

The ports on these electric oil pumps are 3/4" Female BSP In/Out, however the pressure switch versions have a 1" BSP Female Outlet.

10lpm Versions - 10 bar - 600 watt

11lpm versions - 24 bar - 780 watt

13lpm versions - 15 bar - 780 watt