Plastic Dispensing Tanks

The Harlequin range of Transfuel Tanks are portable diesel tanks that fully comply with Control of Pollution (Oil Storage) Regulations (2001) (England and Wales) (N. Ireland 2010) (Water Environment (Oil Storage) (Scotland) Regulations 2006).

These are used to dispense fuel from a static location without the need for additional bunding or spill trays! No specialist driver qualifications are required and no vehicle modifications needed in order to use the Transfuel tanks.

These time and money saving portable tanks allow for transport of diesel simply by loading the tank into or onto the vehicle – saving valuable time and money in not having to bring the vehicle to the pumps! Transfuel tanks also enable safe dispensing of fuel with virtually no effort.

This 430-litre Transfuel Bunded tank, is the first plastic-on plastic portable fuel tank on the market which
enables you to safely and legally transport and dispense fuel on-site. Since it can be loaded onto any vehicle it saves valuable time and money in not having to bring the vehicle to the pumps. A factory fitted Piusi By-Pass 3000 Pump, 4m hose and a dispensing nozzle allows the fuel to be dispensed with virtually no effort.

Specialist driver qualifications and vehicle modifications are not required to use a Transfuel Bunded tank. It fully complies with the Control of Pollution (Oil Storage) Regulations (2001) (England and Wales) (N. Ireland 2010) and Water Environment (Oil Storage) (Scotland) Regulations 2006.

Tank Dimensions:

Length: 1010mm

Width: 1260mm

Height: 1090mm

Weight: 110Kg

Capacity: 426 litres

Piusi Pump Specifications:

Cast iron pump body finished with anti-corrosion paint

Flow rate up to 50 lpm

Vane pump with sintered steel rotor and acetal resin vanes

By-pass valve incorporated in the pump body

Available with 12 or 24 volt direct current motor

Motor protection grade IP55

Used in intermittent service with 30 minute work cycle

Pump attachment support bracket

A safe and convenient way to refuel vehicles and equipment on site.

If the Atlas Truck Depot is used as a static dispensing tank, it must be stored in a bunded area to comply with the Control of Pollution Regulations in GB. The 430 litre TruckMaster has been tested to meet the requirements of the European Agreement (ADR) for the international Carriage of Dangerous Goods by Road

This 1300-litre Slimline Fuel Point, one of the two narrowest diesel dispensing tanks within the Harlequin range, is an ideal choice for on-site refuelling requirement especially where space is limited. It’s environment-friendly bunded design allows it to safely store and dispense fuel in any small commercial, industrial or agricultural environment. This simple and easy to use diesel storage and dispensing solution is manufactured from high-quality mouldings and materials. It can be customised further by adding fuel dispensing accessories such as a mechanical flow meter, particulate filter and an electronic gauge.

Features:

Fully Bunded

56L/min 240Volt fuel pump

4m length; 1” delivery hose

Auto shut-off nozzle

2” BSP fill point

4” lockable inspection port

Optional Extras:

Mechanical flow meter

10Micron particulate fuel filter

Electronic Level Gauge

Installation:

Base Length: 2,175mm

Base Width: 800mm

This 1300-litre Slimline Fuel Station, one of the two narrowest diesel dispensing tank within the Harlequin range, is an ideal choice for any on-site refuelling requirement especially where space is limited. It’s environment-friendly bunded design allows it to safely store and dispense fuel in any small commercial, industrial or agricultural environment. This simple and easy to use diesel storage and dispensing solution is manufactured from high-quality mouldings and materials. It can be customised further by adding fuel dispensing accessories such as a high-speed fuel pump and a fuel management system.

Features:

Fully Bunded

56L/min 240Volt fuel pump

Mechanical flow meter

10Micron particulate & water filter

4m length; 1” delivery hose

Auto shut-off nozzle

Bulkhead light

2” BSP fill point

4” lockable inspection port

LRC overfill prevention probe

Electronic Level Gauge

Optional Extras (Additional Cost):

72L/min fuel pump

Fuel Management System

Installation:

Base Length: 2,175mm

Base Width: 800mm

Suitable for the storage and dispensing of Diesel or Biodiesel including FAME being compliant with the requirements of BS EN 590:2009 and BS EN 14214:2008 including up to a 93% Diesel and 7% biodiesel mix.

Integral 230V pump

Clock gauge

10 Micron Filter

SpillStop overfill prevention

4 meters of hose

Auto-nozzle.

Suitable for the storage and dispensing of Diesel or Biodiesel including FAME being compliant with the requirements of BS EN 590:2009 and BS EN 14214:2008 including up to a 93% Diesel and 7% biodiesel mix

Automatic shut off nozzle,

4mtr Hose,

Flow Meter,

10 Micron Filter,

Watchman Sonic electronic level gauge

SpillStop overfill prevention valve

As standard.

This 1400-litre Fuel Point is an ideal choice for any on-site refuelling requirement. It’s environment-friendly bunded design allows it to safely store and dispense fuel in any small commercial, industrial or agricultural environment. This simple and easy to use diesel storage and dispensing solution is manufactured from high-quality mouldings and materials. It can be customised further by adding fuel dispensing accessories such as a mechanical flow meter, particulate filter and an electronic gauge.

Features:

Fully Bunded

56L/min 240Volt fuel pump

4m length; 1” delivery hose

Auto shut-off nozzle

2” BSP fill point

4” lockable inspection port

Optional Extras (Additional Cost):

Mechanical flow meter

10Micron particulate fuel filter

Electronic Level Gauge

Installation

Base Length: 1,450mm

Base Width: 1,450mm

This 1400-litre Fuel Station is an ideal choice for any on-site refuelling requirement. It’s environment-friendly bunded design allows it to safely store and dispense fuel in any small commercial, industrial or agricultural environment. This simple and easy to use diesel storage and dispensing solution is manufactured from high-quality mouldings and materials. It can be customised further by adding fuel dispensing accessories such as a mechanical flow meter, particulate filter and an electronic gauge.

Features:

Fully Bunded

56L/min 240Volt fuel pump

Mechanical flow meter

10Micron particulate & water filter

4m length; 1” delivery hose

Auto shut-off nozzle

Bulkhead light

2” BSP fill point

4” lockable inspection port

LRC overfill prevention probe

Electronic Level Gauge

Optional Extras (Additional Cost):

72L/min fuel pump

Fuel Management System

Installation:

Base Length: 1,450mm

Base Width: 1,450mm

Suitable for the storage and dispensing of Diesel or Biodiesel including FAME being compliant with the requirements of BS EN 590:2009 and BS EN 14214:2008 including up to a 93% Diesel and 7% biodiesel mix.

Integral 230V pump

Clock gauge

10 Micron Filter

SpillStop overfill prevention

4 meters of hose

Auto-nozzle.

This 2500-litre Fuel Point is an ideal choice for any on-site refuelling requirement. It’s environment-friendly bunded design allows it to safely store and dispense fuel in any small commercial, industrial or agricultural environment.

This simple and easy to use diesel storage and dispensing solution is manufactured from high-quality mouldings and materials. It can be customised further by adding fuel dispensing accessories such as a mechanical flow meter, particulate filter and an electronic gauge.

Fully Bunded

56L/min 240Volt fuel pump

4m length; 1” delivery hose

Auto shut-off nozzle

2” BSP fill point

4” lockable inspection port

This 2500-litre Slimline Fuel Point, one of the two narrowest diesel dispensing tanks within the Harlequin range, is ideal for properties where space is limited. It’s environment-friendly bunded design allows it to safely store and dispense fuel in any small commercial, industrial or agricultural environment. This simple and easy to use diesel storage and dispensing solution is manufactured from high-quality mouldings and materials. It can be customised further by adding fuel dispensing accessories such as a mechanical flow meter, particulate filter and an electronic gauge.

Features:

Fully Bunded

56L/min 240Volt fuel pump

4m length; 1” delivery hose

Auto shut-off nozzle

2” BSP fill point

4” lockable inspection port

Optional Extras (Additional Cost):

Mechanical flow meter

10Micron particulate fuel filter

Electronic Level Gauge

Installation:

Base Length: 2,550mm

Base Width: 1,385mm

This 2500-litre Slimline Fuel Station, one of the two narrowest diesel dispensing tanks within the Harlequin range, is an ideal choice for any on-site refuelling requirement especially where space is limited. It’s environment-friendly bunded design allows it to safely store and dispense fuel in any small commercial, industrial or agricultural environment. This simple and easy to use diesel storage and dispensing solution is manufactured from high-quality mouldings and materials. It can be customised further by adding fuel dispensing accessories such as a high-speed fuel pump and a fuel management system.

Features:

Fully Bunded

56L/min 240Volt fuel pump

Mechanical flow meter

10Micron particulate & water filter

6m length; 1” delivery hose

Auto shut-off nozzle

Bulkhead light

2” BSP fill point

4” lockable inspection port

LRC overfill prevention probe

Electronic Level Gauge

Optional Extras (Additional Cost):

72L/min fuel pump

Fuel Management System

Installation:

Base Length: 2,550mm

Base Width: 1,385mm