Water Pumps & Hoses

The Pedrollo TOP MULTI-AD is a high quality multi stage submersible pump manufactured in Italy. The TOP MULTI-AD is designed to pump clean liquid which is defined according to ISO 22241 as AUS 32 (Aqueous Urea Solution 32.5%).

This liquid is equivalent to other commercial trademarks known as - AdBlue, DEF & Arla 32.

Delivery Body - Glass fibre reinforced technopolymer, complete with threaded ports in compliance with ISO 228/1.

Suction Filter - Glass fibre reinforced technopolymer.

Stage Casing - Glass fibre reinforced technopolymer.

Impeller - Noryl FE1520PW.

Diffuser - Noryl FE1520PW with anti-wear ring.

Vane Diffuser - Glass fibre reinforced technopolymer.

Motor Casing - Stainless Steel AISI 304.

Motor Casing Plate - Stainless Steel AISI 304.

Motor Shaft - Stainless Steel AISI 304.

Shaft with Double Seal - Silicone Carbide (stationary ring), Graphite (rotational ring) & EPDM

Outlet - 11/4" F BSP with Flap-check valve

The Pedrollo PLURIJET 6/90X is a self priming, multi-stage pump manufactured in Italy. The PLURIJET series are suitable for use with Clean water that doesn't contain any particles or with any liquids that aren't aggressive towards the materials the pump is made from.

Due to their silence, reliability & low power consumption, the PLURIJET 90 is recommended for domestic & civil applications, in particular for pressurising and distributing water in combination with pressure tanks.

Pump Body - Stainless steel AISI 304 complete with threaded ports in compliance with ISO 228/1

Body Backplate - Stainless steel AISI 304

Impellers - Noryl FE1520PW

Diffusers - Stainless steel AISI 304

Motor Shaft - Stainless steel EN10088-3 - 01.4104

Mechanical Seal - Graphite (stationary ring), Ceramic (rotational ring) & NBR

Inlet - 1-1/4 " F BSP

Outlet - 1" F BSP

This diaphragm pump is designed as a bilge pump for surface mounting on the deck/bulkhead. Thanks to it's innovative design, the pump body & ports can be positioned in 96 different ways to ensure flexibility. 

As this is a diaphragm pump, it can be used with dirty fuels with solids up to 12.5mm (with 1” hose tails) or 18mm (with 1½ ” hose tails).

The Pedrollo PLURIJET 90 is a self priming, multi-stage pump manufactured in Italy. The PLURIJET series are suitable for use with Clean water that doesn't contain any particles or with any liquids that aren't aggressive towards the materials the pump is made from.

Due to their silence, reliability & low power consumption, the PLURIJET 90 is recommended for domestic & civil applications, in particular for pressurising and distributing water in combination with pressure tanks.

Pump Body - Stainless steel AISI 304 complete with threaded ports in compliance with ISO 228/1

Body Backplate - Stainless steel AISI 304

Impellers - Stainless steel AISI 304

Diffusers - Stainless steel AISI 304

Motor Shaft - Stainless steel AISI 431

Mechanical Seal - Graphite (stationary ring), Ceramic (rotational ring) & NBR

Inlet - 1-1/4 " F BSP

Outlet - 1" F BSP

The Pedrollo CK 90 is a high quality liquid ring pump manufactured in Italy. The CK series are suitable for use with Diesel, Clean water that doesn't contain any particles or with any liquids that aren't aggressive towards the materials the pump is made from.

Due to the specific principle of their operating performance, the Pedrollo CK 90 is an excellent solution in every case where a compact, self priming pump is required or where the fluid flow is irregular or contains air. 400v version available on request.

Pump Body - Cast iron complete with threaded ports in compliance with ISO 228/1

Motor Bracket - Aluminium with brass insert (patented), reduces the risk of impeller seizure

Impeller - Brass star type with open radial vanes

Motor Shaft - Stainless steel EN 10088-3 - 1.4104

Mechanical Seal - Ceramic (stationary ring), Graphite (rotational ring) & Viton

Inlet / Outlet - 1" F BSP

SAMOA Reelmaster RM-100 heavy-duty hose reel for compressed air, low pressure water, antifreeze solutions and diesel.

• Very tough construction able to stand regular use and abuse in Intensive Duty applications.
• Fatigue resistant steel spring for years of durable performance and even load when pulling and recoiling the hose.
• Full port shaft and swivel for no restrictions.
• Spool mounted on two permanent lubricated and sealed ball bearings to reduce torque load on spring for smooth retraction and longer life.
• Large effective radial latching area for easier operation.
• Hose guide arm can be placed in different positions to accommodate any method of mounting.
• Narrow footprint allows accommodating more reels on the same surface.

Hose length: 15 metres

Hose Internal Diameter: 1½"

Connecting Hose Inlet: 1½" BSP (F)

Delivery Hose Outlet: 1½" BSP (F)

Pressure Rating: 20 bar

Weight: 87kg (with hose)

SAMOA Reelmaster RM-100 heavy-duty hose reel for compressed air, low pressure water, antifreeze solutions and diesel.

• Very tough construction able to stand regular use and abuse in Intensive Duty applications.
• Fatigue resistant steel spring for years of durable performance and even load when pulling and recoiling the hose.
• Full port shaft and swivel for no restrictions.
• Spool mounted on two permanent lubricated and sealed ball bearings to reduce torque load on spring for smooth retraction and longer life.
• Large effective radial latching area for easier operation.
• Hose guide arm can be placed in different positions to accommodate any method of mounting.
• Narrow footprint allows accommodating more reels on the same surface.
• Hose reels with hose include 0.8 m inlet hose

Hose length: 15 metres

Hose Internal Diameter: 1"

Connecting Hose Inlet: 1" BSP (F)

Delivery Hose Outlet: 1" BSP (F)

Pressure Rating: 25 bar

Weight: 50kg (with hose)

SAMOA Reelmaster RM-34 heavy-duty hose reel for compressed air, low pressure water, antifreeze solutions, diesel and lubricants.

• Very tough construction able to stand regular use and abuse in Intensive Duty applications.
• Fatigue resistant steel spring for years of durable performance and even load when pulling and recoiling the hose.
• Full port shaft and swivel for no restrictions.
• Spool mounted on two permanent lubricated and sealed ball bearings to reduce torque load on spring for smooth retraction and longer life.
• Large effective radial latching area for easier operation.
• Hose guide arm can be placed in different positions to accommodate any method of mounting.
• Narrow footprint allows accommodating more reels on the same surface.
• Hose reels with hose include 0.8 m inlet hose

Hose length: 20 metres

Hose Internal Diameter: 1/2"

Connecting Hose Inlet: 3/4" BSP (F)

Delivery Hose Outlet: 1/2" BSP (M)

Pressure Rating: 160 bar

Weight: 36kg (with hose)

SAMOA Reelmaster RM-34 heavy-duty hose reel for compressed air, low pressure water, antifreeze solutions, diesel and lubricants.

• Very tough construction able to stand regular use and abuse in Intensive Duty applications.
• Fatigue resistant steel spring for years of durable performance and even load when pulling and recoiling the hose.
• Full port shaft and swivel for no restrictions.
• Spool mounted on two permanent lubricated and sealed ball bearings to reduce torque load on spring for smooth retraction and longer life.
• Large effective radial latching area for easier operation.
• Hose guide arm can be placed in different positions to accommodate any method of mounting.
• Narrow footprint allows accommodating more reels on the same surface.
• Hose reels with hose include 0.8 m inlet hose

Hose length: 15 metres

Hose Internal Diameter: 3/4"

Connecting Hose Inlet: 3/4" BSP (M)

Delivery Hose Outlet: 3/4" BSP (M)

Pressure Rating: 125 bar

Weight: 38kg (with hose)

The Piusi SB325_X AdBlue™ Nozzle is a lightweight, plastic automatic nozzle with a stainless steel breakaway spout for use with AdBlue pump systems. The breakaway spout mechanism ensures that if the vehicle accidently drives away leaving the nozzle still  in the vehicle's fill point, the spout will detach from the body of the nozzle. This means that damage will be limited to the spout only which can be replaced as a spare part, and the AdBlue pump system on the storage tank will not be pulled away with the force. Thanks to the integrated K24 digital flow meter, this AdBlue™ nozzle has the added functionality for the user to conveniently view how much fluid has been dispensed into the vehicle.

Made from lightweight plastic but with a sturdy stainless steel spout, this Piusi nozzle is a cost effective alternative to the completely stainless steel automatic AdBlue™ nozzles previously only available on the market. Like these more expensive models, it still reliably shuts off dispensing when the AdBlue tank becomes full to prevent any overspill.

There is also a version of the SB325_X with added magnetic miss-filling spout to prevent AdBlue from being put in the diesel tank. This ensures that the AdBlue™ dispensing nozzle can only release fluid into a fill point that has a partnering magnetic adaptor fitted into it. By having magnetic adaptor fitted in the AdBlue™ fill point only, the AdBlue™ nozzle is unable to dispense into the diesel tank. View the SB325 AdBlue magnetic nozzle here.

The Piusi SB325_X AdBlue™ Nozzle is a lightweight, plastic automatic nozzle complete with breakway stainless steel spout for use with AdBlue pumping systems. The breakaway spout mechanism means that if the vehicle accidently drives away with the nozzle still positioned in the vehicle's fill point, the spout will detach from the nozzle. This means that damage will be limited to the spout only which can be replaced as a spare part, and the AdBlue pump system connected to the storage tank will not be pulled away. 

Constructed of plastic but with a sturdy, stainless steel spout, this Piusi nozzle is a lightweight, cost effective alternative to the completely stainless steel automatic AdBlue™ nozzles on the market. Like these more expensive models, it still reliably shuts off dispensing when the AdBlue tank becomes full to prevent any overspill.

There is also a version of the SB325_X with added magnetic miss-filling spout to prevent AdBlue from being put in the diesel tank. This ensures that the AdBlue™ dispensing nozzle can only release fluid into a fill point that has a partnering magnetic adaptor fitted into it. By having magnetic adaptor fitted in the AdBlue™ fill point only, the AdBlue™ nozzle is unable to dispense into the diesel tank. View the SB325 AdBlue magnetic nozzle here.

The Piusi Automatic Stainless Steel AdBlue™ Nozzle is used for the dispensing of urea, or DEF as it is referred to in the US. As an automatic nozzle, it is designed to shut off the flow when the tank is full, allowing the safe use of the integrated stay open latch. These AdBlue™ nozzles are constructed of stainless steel with a plastic hand guard for comfort, and are supplied with a 3⁄4” swivel hose tail for easy hose connection. This AdBlue™ dispensing nozzle is often used in the Suzzara Blue AdBlue pump kits.