AdBlue Hoses & Reels

The Talon AdBlue dry break coupler is designed to open and close automatically when the delivery vehicle is connected or disconnected to the unit. This ensures minimal loss of AdBlue upon disconnecting, saving time and money cleaning up spills.

This tank coupler is manufactured from a sturdy stainless steel and is interchangeable with many of brands of coupling.

The Azure AdBlue™ Tank Coupler is designed to fit onto the fill point of an AdBlue™ storage tank. It is a screw connect dry break valve that enables a spill-free connection to the tanker refilling hose.

This AdBlue™ tank coupler benefits from a sturdy stainless steel construction and is interchangeable with many other brands of coupling.

The Husky AdBlue Safe-T-Break® couplings are designed to disconnect the hose and nozzle from the pump, in situations where the nozzle is still attached to the fill point and the vehicle drives off.

The Husky Safe-T-Breaks® prevent the whole AdBlue™ tank installation from being ripped away, therefore stopping AdBlue, otherwise known as DEF, from spilling out onto the floor.

This Husky breakaway coupling is 100% compatible with AdBlue and is re-usable, therefore helping to prevent damage and fuel spillages again and again once reconnected.

The Hi-Grip Stainless Steel Hose Clamps are designed for hoses with 25mm to 35mm OD, meaning that only one version needs to be stocked for a range of hose sizes.

These hose clips are made entirely of 18/8 marine quality stainless steel making them suitable for salt water and other highly corrosive applications. They are Lloyd’s Register approved for marine, offshore and industrial use.

The Piusi Polypropylene Hose Tail is a 90° degree hose tail for hose connections of 19mm. It is ideal for use with AdBlue™, and has been designed for use with the Piusi SEC IBC Connectors.

The Plastic Hose Tail is available in two alternative versions. It can be supplied as a standard Male or Female BSP hose barb, or as a 90° version, which can also be Male or Female. These Piusi plastic hose tails are designed to be used during transfer of AdBlue™, and are suitable for hoses with a 19mm inner diameter.

The Stainless Steel Hose Tail is a heavy duty pattern, and is designed for use with more aggressive fluids such as AdBlue™. These hose tails can be connected to hoses that have inner diameters from 19mm up to 50mm. There is an option for this hose barb to come with a swivel connection.

Smaller sizes available on request.

The Piusi SEC IBC Connectors have been designed by Piusi to overcome issues associated with the traditional lever based CDS connector.

These IBC connectors work by screwing the valve open/closed without acting any angular pressure on the IBC connection point. Once connected, the SEC valve ensures that the AdBlue™ is not contaminated by the surrounding environment of the IBC tank. These come as standard with the Suzzara Blue IBC AdBlue pump kits.

The Piusi AdBlue™ Hose Reel through careful design has been constructed to be able to limit pressure loss and facilitate use, even for high flow AdBlue pump applications. These retractable hose reels can be supplied either as a bare hose reel or complete with hose, and are designed for mounting onto a wall or inside an AdBlue™ storage tank. 

The AdBlue hose reel without hose will include a 3/4” BSP M swivel inlet connection, a hose tail fitting and a hose fastening clamp for easy connection. 

The Stainless Steel High Capacity Bare Fuel Hose Reel is an automatic reel supplied without hose, making it ideal for a range of applications. Thanks to its high volume design, this retractable diesel fuel hose reel is capable of dealing with environments where a longer length hose is required. Its stainless steel AISI 304 structure makes this hose reel ideal for heavy duty conditions as well as applications where a more aggressive fluid may be involved.

This fuel hose reel benefits from a twin pedestal design which aids performance and reliability, and adjustable arm brackets for easy positioning.

This Piusi AdBlue™ Suction Hose is a quality solution designed for use with all electric AdBlue™ (or DEF as it is otherwise known) pump kits and installations. This particular suction hose is supplied as standard on all Suzzara Blue electric AdBlue pump kits in a 1.5m length, and is often specified on AdBlue™ storage tanks. This Piusi AdBlue™ hose can be supplied either open ended or in a coil depending upon customer requirements.

The Clear Diesel Suction Hose is a flexible, general suction hose with steel wire braid and a transparent wall. This enables visual indication of the fluid which gives you an idea of flow at a glance. Whilst this diesel hose is primarily designed for suction applications, it can also be used as a fuel delivery hose. The ¾” version of these fuel suction hoses can be used in AdBlue™ pump installations and in AdBlue™ gravity hose kits.