AdBlue Transfer Pumps

The Pedrollo TOP MULTI-AD is a high quality multi stage submersible pump manufactured in Italy. The TOP MULTI-AD is designed to pump clean liquid which is defined according to ISO 22241 as AUS 32 (Aqueous Urea Solution 32.5%).

This liquid is equivalent to other commercial trademarks known as - AdBlue, DEF & Arla 32.

Delivery Body - Glass fibre reinforced technopolymer, complete with threaded ports in compliance with ISO 228/1.

Suction Filter - Glass fibre reinforced technopolymer.

Stage Casing - Glass fibre reinforced technopolymer.

Impeller - Noryl FE1520PW.

Diffuser - Noryl FE1520PW with anti-wear ring.

Vane Diffuser - Glass fibre reinforced technopolymer.

Motor Casing - Stainless Steel AISI 304.

Motor Casing Plate - Stainless Steel AISI 304.

Motor Shaft - Stainless Steel AISI 304.

Shaft with Double Seal - Silicone Carbide (stationary ring), Graphite (rotational ring) & EPDM

Outlet - 11/4" F BSP with Flap-check valve

The SAMOA portable electric AdBlue dispensing trolley is designed for the dispensing of AdBlue specifically from a drum trolley. The Solura series AdBlue pump is securely mounted to the side of the drum trolley, which enables the whole pumping system to be moved with the drum wherever the dispensing point is. This is made even more convenient with the optional 15 metre power cable reel, making it much easier to refill AdBlue in more remote areas of the workshop.

This portable AdBlue trolley is an all in one solution for dispensing AdBlue from drums. It comes fitted with a 230v Solura series AdBlue pump, Passenger car type automatic nozzle, Trisure connector, delivery & suction hose. The optional cable reel allows dispensing up to 15 metres away from the power source whilst keeping the power cables tidy.

The Hytek IBC Mounted AdBlue Transfer Pump kit, is supplied with all parts to enable quick and easy transfer of AdBlue from an IBC. Neatly fitted to a bracket, this pump kit comes fitted with the choice of an Automatic, or Manual nozzle.

AdBlue Pump Kit Specification -

Self Priming Diaphragm AdBlue Transfer Pump with 1.8m power cable

230v

Bypass valve & On/Off switch

30 Litres per minute flow rate

20 minute maximum run time

6 Metre delivery hose

1.5m Suction hose with SEC connector

Manual Nozzle or Automtic Nozzle with stainless spout

Integrated hose nozzle holder

2 Year warranty

The Hytek IBC Mounted AdBlue Transfer Pump kit, is supplied with all parts to enable quick and easy transfer of AdBlue from an IBC. Neatly fitted to a bracket, this pump kit comes fitted with an Automatic nozzle & Digital flow meter.

AdBlue Pump Kit Specification -

Self Priming Diaphragm AdBlue Transfer Pump with 1.8m power cable

230v

Bypass valve & On/Off switch

30 Litres per minute flow rate

20 minute maximum run time

+/- 1% Accuracy (Flow Meter)

6 Metre delivery hose

1.5m Suction hose with SEC connector

Automatic shut off nozzle with stainless spout

Integrated hose nozzle holder

2 Year warranty

The Hytek engineered AdBlue Drum Pump Kit is designed to mount to the top of drums for easy transfer of DEF. The kit is designed to fit AdBlue containers that require a Trisure Connector for sealing. The frame is easy to move from drum to drum and comes with all necessary parts.

Pump Kit Specification -

Self Priming Diaphragm pump with Bypass valve

IP55 Weatherproof rating

AF2 Trisure Connector with 3 part suction tube, up to 1050mm Long

Built in filter, venting system & non return valve

Pump available in 12v or 230v

6 Metre delivery hose

Manual nozzle

Nozzle holder with switch

2 Metre cables

20 Minute max run time

30 litres per minute flow rate

1 year warranty

This self priming AdBlue pump is ideal for transferring bulk AdBlue (DEF) from Drums or IBC's into smaller containers or tanks. This AdBlue transfer pump comes fitted with an On/Off switch & a 1.8 metre power cable.

Pump Specification -

1" Male BSPP Inlet / Outlet, Supplied with 3/4" Hose Tails

Integral Bypass Valve

Max Run Time: 20 Minutes

Maximum Flow Rate: 35 Litres per minute

1.8 Metre power cable

On/Off Switch

230v

1 Year warranty

SAMOA Solura Blue 24v DC multi-diaphragm pump with no mechanical seals designed for dispensing AdBlue®/DEF and other water-based non corrosive products. Pump is self-priming and has a by-pass valve. Electric motors have IP55 protection and include on/off switch, fuse and 2m cable and crocodile clips.

Electric motor power: 310w

Inlet/outlet connection: 1" BSP (M)

Maximum suction lift: 1.8m

Maximum delivery pressure: 1.6 bar

Maximum delivery: up to 32 l/min

SAMOA Solura Blue 12v DC multi-diaphragm pump with no mechanical seals designed for dispensing AdBlue®/DEF and other water-based non corrosive products. Pump is self-priming and has a by-pass valve. Electric motors have IP55 protection and include on/off switch, fuse and 2m cable and crocodile clips.

Electric motor power: 260w

Inlet/outlet connection: 1" BSP (M)

Maximum suction lift: 1.8m

Maximum delivery pressure: 1.6 bar

Maximum delivery: up to 32 l/min

SAMOA Solura Blue 230v 50Hz AC multi-diaphragm pump with no mechanical seals designed for dispensing AdBlue®/DEF and other water-based non corrosive products. Pump is self-priming and has a by-pass valve. Electric motors have IP55 protection and include on/off switch, fuse and 2m cable with plug.

Electric motor power: 400w

Inlet/outlet connection: 1" BSP (M)

Maximum suction lift: 1.8m

Maximum delivery pressure: 1.6 bar

Maximum delivery: up to 30 l/min

This Piusibox AdBlue™ Extraction Pump is a self-priming AC membrane pump kit designed for removing AdBlue™ from the vehicle’s tank in a service environment quickly and cleanly. Before refilling, the AdBlue™ tank of a vehicle is often emptied of any dregs to ensure that the new fluid added is not contaminated by any dirt that may have found its way into the vehicle. Another application that this AdBlue™ transfer pump kit is designed for is the vehicle scrap market where the fuels and fluids inside the vehicle need extracting prior to dismantling. 

Also included in this Piusi kit is a 2m small bore plastic tubing for inserting into the vehicle tank, and 2m of tubing for inserting into the container where the old AdBlue™ is collected. All components of the electric AdBlue™ pump kit can be neatly packed away within the handy and compact carry box that aids convenient transportation and storage. 

The Piusibox Portable 24v AdBlue™ Pump is a ready to dispense, portable pumping solution in a sturdy pull along box. This AdBlue™ transfer pump kit comes complete with delivery hose, manual nozzle, suction hose with strainer, providing the user with everything they need for the mobile refilling of their vehicle.

As its suction hose can be easily dropped into either a drum or IBC, the Piusibox AdBlue™ pump is ideal if there are multiple different containers on site. Thanks to its 2m cable and clips for connection to the vehicle’s battery, it does not need mains power to operate which has seen it become a popular solution in the agricultural and construction markets.

This Piusi pump’s protective box helps prevent contamination and aids transportation in heavy duty environments. To further prevent contamination, it comes with an AdBlue™ long life filter for removing any impurities and a pair of gloves.

The Piusi Premium Rotary Manual AdBlue™ Pump is specially designed for the transfer of AdBlue™ (DEF) from a square bar IBC, where there is no access to power or where the quantity dispensed is not high enough to warrant a more expensive electric pump.

Thanks to its careful design and Italian construction, this Piusi pump has a higher specification compared to other AdBlue™ hand pumps on the market in several ways. Benefitting from a Stainless Steel outer casing as opposed to plastic, this Piusi AdBlue™ pump is more durable, giving it a longer life span. It also has a much smoother operation for the user thanks to its rolling hand grip and quality internals.

Designed specifically as AdBlue™ IBC pump, this IBC plate mounted kit comes complete with suction and delivery hose, with 19mm stainless steel spout, which comes with spout stopper to reduce crystallisation that can cause mess and blockages. The SEC Connector in the picture is supplied separately to this AdBlue™ transfer pump – see Accessories table.

Please note: This IBC AdBlue™ pump kit is designed for fitting to the top bar of a squared bar IBC only.