Steel Fuel Storage Tanks

Our range of DLC Steel Bunded Heating Oil Tanks are dual purpose, all steel tanks that has been designed specifically for domestic and light commercial users. The DLC range can easily be upgraded to become a fuel dispensing tank by simply adding a cabinet and pump, you can order this by searching for 'DLCC'.

This 1,000 litre Steel Bunded Oil Tank is manufactured in 3 parts to enable easy disassembly and reassembly on site, allowing these tanks to be installed in even the most hard to reach places.

The DLC range of Bunded Oil Tanks can be supplied with steel base supports, this eliminates direct contact with the ground. Steel section supports are available to run length or width ways to allow them to be positioned to match existing tank bases. Alternatively, they can be supplied with a variety of Steel Tank Stands which are perfectly suited to gravity feed applications.

These Bunded Steel Oil Tanks have a dual purpose fill/vent which can be used to view the tank's contents. The tank vents directly to the tank bund and then to the atmosphere removing the risk of spills occurring when filling the tank.

Northern Tank Stores DLC Range of Bunded Oil Tanks come with a 1” bottom outlet and lockable isolation valve. There is a 1½” BSP and a 2” BSP socket located underneath the lockable tank hatch, this allows additional items such as gauges & alarms to be fitted. The lockable lid keeps the tank contents safe and secure.

Compliance:

Control of pollution (oil storage) (England) regulations 2001, PPG2, PPG26 and BS799 pt5.

Our range of DLC Steel Bunded Heating Oil Tanks are dual purpose, all steel tanks that has been designed specifically for domestic and light commercial users. The DLC range can easily be upgraded to become a fuel dispensing tank by simply adding a cabinet and pump, you can order this by searching for 'DLCC'.

This 1,400 litre Steel Bunded Oil Tank is manufactured in 3 parts to enable easy disassembly and reassembly on site, allowing these tanks to be installed in even the most hard to reach places.

The DLC range of Bunded Oil Tanks can be supplied with steel base supports, this eliminates direct contact with the ground. Steel section supports are available to run length or width ways to allow them to be positioned to match existing tank bases. Alternatively, they can be supplied with a variety of Steel Tank Stands which are perfectly suited to gravity feed applications.

These Bunded Steel Oil Tanks have a dual purpose fill/vent which can be used to view the tank's contents. The tank vents directly to the tank bund and then to the atmosphere removing the risk of spills occurring when filling the tank.

Northern Tank Stores DLC Range of Bunded Oil Tanks come with a 1” bottom outlet and lockable isolation valve. There is a 1½” BSP and a 2” BSP socket located underneath the lockable tank hatch, this allows additional items such as gauges & alarms to be fitted. The lockable lid keeps the tank contents safe and secure.

Compliance:

Control of pollution (oil storage) (England) regulations 2001, PPG2, PPG26 and BS799 pt5.

Manufactured in the UK from Mild Steel Plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and light oils.

Included with this Bunded Oil Tank is -

Bund Gauge

Tank Contents Gauge

2" BSP Fill Point with Cap

2" BSP Tank Vent with Cap

1" BSP Base feed with Isolation Valve

Top Lift points (Lift empty only)

1" BSP Spare socket into bund

10 Year Guarantee

This self bunding, steel oil storage tank is manufactured to comply with all current regulations.
Suitable for above ground instillations at Domestic, Commercial, Agricultural and industrial locations for storage of Paraffin, Kerosene, diesel oils and light lubricant oils.

Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.

Manufactured in the UK from Mild Steel Plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and light oils.

Included with this Bunded Oil Tank is -

Bund Gauge

Tank Contents Gauge

2" BSP Fill Point with Cap

2" BSP Tank Vent with Cap

1" BSP Base feed with Isolation Valve

Top Lift points (Lift empty only)

1" BSP Spare socket into bund

10 Year Guarantee

This self bunding, steel oil storage tank is manufactured to comply with all current regulations.
Suitable for above ground instillations at Domestic, Commercial, Agricultural and industrial locations for storage of Paraffin, Kerosene, diesel oils and light lubricant oils.

Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.

Manufactured in the UK from Mild Steel Plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and light oils.

Included with this Bunded Oil Tank is -

Float Type Bund Gauge

Float Type Tank Contents Gauge

2" BSP Fill Point with Cap

2" BSP Tank Vent with Cap

1" BSP Base feed with Isolation Valve

1" BSP Return Point

Top Lift points (Lift empty only)

1" BSP Spare socket into bund

10 Year Guarantee

Optional Extras -

Top Feed Outlet

Fill Point Cabinet

Overfill Valve

Electronic Tank Gauges

Selenoid Valves

Day Tank Controllers

Pump Kits

Low Level Fill Points

This self bunding, steel oil storage tank is manufactured to comply with all current regulations.
Suitable for above ground instillations at Domestic, Commercial, Agricultural and industrial locations for storage of Paraffin, Kerosene, diesel oils and light lubricant oils.

Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.

Our range of DLC Steel Bunded Heating Oil Tanks are dual purpose, all steel tanks that has been designed specifically for domestic and light commercial users. The DLC range can easily be upgraded to become a fuel dispensing tank by simply adding a cabinet and pump, you can order this by searching for 'DLCC'.

This 2,500 litre Steel Bunded Oil Tank is manufactured in 3 parts to enable easy disassembly and reassembly on site, allowing these tanks to be installed in even the most hard to reach places.

The DLC range of Bunded Oil Tanks can be supplied with steel base supports, this eliminates direct contact with the ground. Steel section supports are available to run length or width ways to allow them to be positioned to match existing tank bases. Alternatively, they can be supplied with a variety of Steel Tank Stands which are perfectly suited to gravity feed applications.

These Bunded Steel Oil Tanks have a dual purpose fill/vent which can be used to view the tank's contents. The tank vents directly to the tank bund and then to the atmosphere removing the risk of spills occurring when filling the tank.

Northern Tank Stores DLC Range of Bunded Oil Tanks come with a 1” bottom outlet and lockable isolation valve. There is a 1½” BSP and a 2” BSP socket located underneath the lockable tank hatch, this allows additional items such as gauges & alarms to be fitted. The lockable lid keeps the tank contents safe and secure.

Compliance:

Control of pollution (oil storage) (England) regulations 2001, PPG2, PPG26 and BS799 pt5.

Manufactured in the UK from Mild Steel Plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and light oils.

Included with this Bunded Oil Tank is -

Bund Gauge

Tank Contents Gauge

2" BSP Fill Point with Cap

2" BSP Tank Vent with Cap

1" BSP Base feed with Isolation Valve

Top Lift points (Lift empty only)

1" BSP Spare socket into bund

10 Year Guarantee

This self bunding, steel oil storage tank is manufactured to comply with all current regulations.
Suitable for above ground instillations at Domestic, Commercial, Agricultural and industrial locations for storage of Paraffin, Kerosene, diesel oils and light lubricant oils.

Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.

Manufactured in the UK from Mild Steel Plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and light oils.

Included with this Bunded Oil Tank is -

Bund Gauge

Tank Contents Gauge

2" BSP Fill Point with Cap

2" BSP Tank Vent with Cap

1" BSP Base feed with Isolation Valve

Top Lift points (Lift empty only)

1" BSP Spare socket into bund

10 Year Guarantee

This self bunding, steel oil storage tank is manufactured to comply with all current regulations.
Suitable for above ground instillations at Domestic, Commercial, Agricultural and industrial locations for storage of Paraffin, Kerosene, diesel oils and light lubricant oils.

Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.

Manufactured in the UK from Mild Steel Plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and light oils.

Included with this Bunded Oil Tank is -

Float Type Bund Gauge

Float Type Tank Contents Gauge

2" BSP Fill Point with Cap

2" BSP Tank Vent with Cap

1" BSP Base feed with Isolation Valve

1" BSP Return Point

Top Lift points (Lift empty only)

1" BSP Spare socket into bund

10 Year Guarantee

Optional Extras -

Top Feed Outlet

Fill Point Cabinet

Overfill Valve

Electronic Tank Gauges

Selenoid Valves

Day Tank Controllers

Pump Kits

Low Level Fill Points

This self bunding, steel oil storage tank is manufactured to comply with all current regulations.
Suitable for above ground instillations at Domestic, Commercial, Agricultural and industrial locations for storage of Paraffin, Kerosene, diesel oils and light lubricant oils.

Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.

Manufactured in the UK from Mild Steel Plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and light oils.

Included with this Bunded Oil Tank is -

Float Type Bund Gauge

Float Type Tank Contents Gauge

2" BSP Fill Point with Cap

2" BSP Tank Vent with Cap

1" BSP Base feed with Isolation Valve

1" BSP Return Point

Top Lift points (Lift empty only)

1" BSP Spare socket into bund

10 Year Guarantee

Optional Extras -

Top Feed Outlet

Fill Point Cabinet

Overfill Valve

Electronic Tank Gauges

Selenoid Valves

Day Tank Controllers

Pump Kits

Low Level Fill Points

This self bunding, steel oil storage tank is manufactured to comply with all current regulations.
Suitable for above ground instillations at Domestic, Commercial, Agricultural and industrial locations for storage of Paraffin, Kerosene, diesel oils and light lubricant oils.

Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.

Manufactured in the UK from Mild Steel Plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and light oils.

Included with this Bunded Oil Tank is -

Bund Gauge

Tank Contents Gauge

2" BSP Fill Point with Cap

2" BSP Tank Vent with Cap

1" BSP Base feed with Isolation Valve

Top Lift points (Lift empty only)

1" BSP Spare socket into bund

10 Year Guarantee

This self bunding, steel oil storage tank is manufactured to comply with all current regulations.
Suitable for above ground instillations at Domestic, Commercial, Agricultural and industrial locations for storage of Paraffin, Kerosene, diesel oils and light lubricant oils.

Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.

Manufactured in the UK from Mild Steel Plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and light oils.

Included with this Bunded Oil Tank is -

Float Type Bund Gauge

Float Type Tank Contents Gauge

2" BSP Fill Point with Cap

2" BSP Tank Vent with Cap

1" BSP Base feed with Isolation Valve

1" BSP Return Point

Top Lift points (Lift empty only)

1" BSP Spare socket into bund

10 Year Guarantee

Optional Extras -

Top Feed Outlet

Fill Point Cabinet

Overfill Valve

Electronic Tank Gauges

Selenoid Valves

Day Tank Controllers

Pump Kits

Low Level Fill Points

This self bunding, steel oil storage tank is manufactured to comply with all current regulations.
Suitable for above ground instillations at Domestic, Commercial, Agricultural and industrial locations for storage of Paraffin, Kerosene, diesel oils and light lubricant oils.

Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.