AdBlue Transfer Pumps

The Piston Manual AdBlue™ Pump is designed for the cost effective and simple transfer of AdBlue™, also referred to as DEF, from a drum. Thanks to its manual operation, these AdBlue™ hand pumps are a popular choice when there is no power available, or when an electric AdBlue™ pump is not deemed necessary due to the small amounts of the fluid being dispensed.

Primarily used as an AdBlue™ drum pump, this mode comes compete with a telescopic downtube and drum connector, with a version also available with 2m delivery hose and spout.

This self priming AdBlue pump is ideal for transferring bulk AdBlue (DEF) from Drums or IBC's into smaller containers or tanks. This AdBlue transfer pump comes fitted with an On/Off switch & a 1.8 metre power cable.

Pump Specification -

1" Male BSPP Inlet / Outlet, Supplied with 3/4" Hose Tails

Integral Bypass Valve

Max Run Time: 20 Minutes

Maximum Flow Rate: 35 Litres per minute

1.8 Metre power cable

On/Off Switch

230v

1 Year warranty

The Suzzara Blue AC Electric AdBlue™ Pump is the market leading AdBlue™ (DEF) transfer solution from Italian manufacturer, Piusi. This mains powered AdBlue™ transfer pump is ideal for fixed pumping installations and is commonly seen on many bulk tanks and static IBC applications, as it is the model that makes up all AC Piusi pump kits. There is a version available complete with timer, that switches the AdBlue™ pump off after 6 minutes of running to prevent damage to the pump if accidentally left on by the user.

This self-priming, 5 chamber membrane electric AdBlue™ pump does not have a shaft seal, which limits the possibility of leaking as it wears. As with the other Piusi pumps, this model has an incorporated bypass valve and is IP55 protection grade rated meaning that it is suitable for installation outdoors.

The Suzzara Blue DC 24v and 12v AdBlue™ Pump is the market leading AdBlue™ (DEF) transfer solution from Italian manufacturer Piusi. Complete with 2m cable and clips for connection to the vehicle’s battery, this AdBlue™ transfer pump doesn’t require mains power to operate, making it suitable when mobile refilling is required.

This self-priming, 5 chamber membrane 24v and 12v AdBlue™ pump does not have a shaft seal, which reduces the chance of leaking as it wears. As with the other Piusi pumps, this model has an incorporated bypass valve and benefits from IP55 protection grade making it suitable for use in outdoor environments.This is the pump used within all DC Piusi AdBlue™ pump kits, and is suitable for mounting onto a drum, IBC or AdBlue™ storage tank depending upon the application requirements.

SAMOA Solura Blue 230v 50Hz AC multi-diaphragm pump with no mechanical seals designed for dispensing AdBlue®/DEF and other water-based non corrosive products. Pump is self-priming and has a by-pass valve. Electric motors have IP55 protection and include on/off switch, fuse and 2m cable with plug.

Electric motor power: 400w

Inlet/outlet connection: 1" BSP (M)

Maximum suction lift: 1.8m

Maximum delivery pressure: 1.6 bar

Maximum delivery: up to 30 l/min

SAMOA Solura Blue 12v DC multi-diaphragm pump with no mechanical seals designed for dispensing AdBlue®/DEF and other water-based non corrosive products. Pump is self-priming and has a by-pass valve. Electric motors have IP55 protection and include on/off switch, fuse and 2m cable and crocodile clips.

Electric motor power: 260w

Inlet/outlet connection: 1" BSP (M)

Maximum suction lift: 1.8m

Maximum delivery pressure: 1.6 bar

Maximum delivery: up to 32 l/min

SAMOA Solura Blue 24v DC multi-diaphragm pump with no mechanical seals designed for dispensing AdBlue®/DEF and other water-based non corrosive products. Pump is self-priming and has a by-pass valve. Electric motors have IP55 protection and include on/off switch, fuse and 2m cable and crocodile clips.

Electric motor power: 310w

Inlet/outlet connection: 1" BSP (M)

Maximum suction lift: 1.8m

Maximum delivery pressure: 1.6 bar

Maximum delivery: up to 32 l/min

The Pedrollo TOP MULTI-AD is a high quality multi stage submersible pump manufactured in Italy. The TOP MULTI-AD is designed to pump clean liquid which is defined according to ISO 22241 as AUS 32 (Aqueous Urea Solution 32.5%).

This liquid is equivalent to other commercial trademarks known as - AdBlue, DEF & Arla 32.

Delivery Body - Glass fibre reinforced technopolymer, complete with threaded ports in compliance with ISO 228/1.

Suction Filter - Glass fibre reinforced technopolymer.

Stage Casing - Glass fibre reinforced technopolymer.

Impeller - Noryl FE1520PW.

Diffuser - Noryl FE1520PW with anti-wear ring.

Vane Diffuser - Glass fibre reinforced technopolymer.

Motor Casing - Stainless Steel AISI 304.

Motor Casing Plate - Stainless Steel AISI 304.

Motor Shaft - Stainless Steel AISI 304.

Shaft with Double Seal - Silicone Carbide (stationary ring), Graphite (rotational ring) & EPDM

Outlet - 11/4" F BSP with Flap-check valve

The Piusi Suzzara Blue Portable 12v AdBlue™ Pump is a ready to dispense kit designed for the mobile refilling of AdBlue™ (DEF). It is flexible in its application as the suction hose can be dropped into either a drum or IBC, not limiting it to one or the other if there are multiple on site. Thanks to its 2m cable and clips for connection to the vehicle’s battery and carry handle, this AdBlue™ transfer pump can easily be moved between containers.

This Piusi pump kit comes complete with delivery hose, manual nozzle, suction hose with strainer, providing the user with everything they need to refill their vehicle with AdBlue™. It has proven a popular solution within the agricultural and construction market due to not requiring mains power to operate.

The Submersible AdBlue™ Pump has been designed to be installed in large AdBlue™ tank installations where increased head pressure is required. This is a popular AdBlue™ transfer pump solution for tank manufacturers, as being submerged into the fluid means the storage tank cabinet does not need to make room for a pump to be fitted. 

These electric AdBlue™ pumps are built from anti-corrosive materials with a three stage impeller, wear resistant shaft and an anti-debris stainless steel strainer. The seals within this AdBlue™ pump - known as a DEF pump in the US - have been designed to keep the urea pure and the electrical cable gland seal has been reinforced. The pump’s motor has excellent cooling properties and can be used even when the top of the motor becomes partially exposed.

This Piusibox AdBlue™ Extraction Pump is a self-priming AC membrane pump kit designed for removing AdBlue™ from the vehicle’s tank in a service environment quickly and cleanly. Before refilling, the AdBlue™ tank of a vehicle is often emptied of any dregs to ensure that the new fluid added is not contaminated by any dirt that may have found its way into the vehicle. Another application that this AdBlue™ transfer pump kit is designed for is the vehicle scrap market where the fuels and fluids inside the vehicle need extracting prior to dismantling. 

Also included in this Piusi kit is a 2m small bore plastic tubing for inserting into the vehicle tank, and 2m of tubing for inserting into the container where the old AdBlue™ is collected. All components of the electric AdBlue™ pump kit can be neatly packed away within the handy and compact carry box that aids convenient transportation and storage. 

The SAMOA Directflo DF30 is a very compact and reliable diaphragm pumps for small volume transfer, dosing, spraying and dispensing a variety of fluids.

This pump is suitable for transferring Antifreeze solutions, Windscreen wash solutions, AdBlue and can be used as a stand alone pump, or in small systems that include hose reels.