Plastic Bunded Oil Tanks

This 350-litre capacity vertical environment-friendly bunded oil tank is suitable for the storage of heating oil in a domestic or commercial set up. It’s ideal for use when additional tank technology is not a requirement. Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing.

The Harlequin 350HQI Comes complete with -

Integrally bunded

Bottom outlet with 1" BSP(F) thread

4" lockable inspection/fill cap

32mm hole with cover for electronic gauge

Inner tank vent

10 Year guarantee

The 650 litre bunded heating oil tank from Carbery is an ideal choice for small domestic installations thanks its slim profile, relatively low weight and nearly 650 litre capacity.

All Carbery bunded tanks come backed by a 10 year warranty and free delivery (exclusions apply, please see below)

This tank is EN13341 Compliant, OFCERT approved and manufactured to ISO Standards.

Supplied with -

• 2” lockable oil tank fill point
• 5” lockable oil tank inspection point
• 2” fuel tank vent
• Lockable access lid
• 32mm electronic gauge point
• Contents Dipstick
• 1” BSP bottom outlet

Free delivery on Carbery Tanks includes delivery within mainland UK, but excludes the following postcodes - AB, BT, DD, DG, EH, FK, G, HS, IM, IV, KA, KW, KY, ML, PA, PH, TD, TR and ZE. Please contact us for delivery costs to these postcode areas.

This 650 Litre Rototek 3C Centurion Bunded Oil Tank is ideal for the safe, secure and environmentally responsible storage of heating oil. Rotationally moulded in the United Kingdom from a high grade Medium Density Polyethylene which is tough, durable and UV Stabilised to prevent colour fade.

The tanks come fully assembled and with an optional installation kit, making the tank simple and ready to install by an approved engineer.*

*Please note that all oil tanks should be installed by a suitably competent person in accordance with statutory requirements.

These bunded oil tanks come with a 10 year warranty if installed by an Oftec Approved Engineer and subsequently inspected annually by an Oftec Approved Engineer.

Standard fittings and parts supplied with the tank:

1” BSP Bottom Outlet

2 x 2 Inch Vents

Lockable Manhole Lid

4” Inspection aperture with lockable screw cap

Optional Fittings:

Apollo Bund alarm with plug in receiver

Float Level Gauge

Atkinson Installation Kit Comprising of:

1-0.5 inch reducer

Fuel Filter with lever type isolation valve

PTFE and Heldite thread sealant

This 650-litre capacity slimline environment-friendly bunded oil tank is suitable for the storage of heating oil in a domestic or commercial set up. It’s ideal for use when space is at a premium and additional tank technology is not a requirement.

Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing. Moulded in handles allow for the tank to be transported quite easily.

The Harlequin 650HQI comes complete with -

Integrally bunded

Bottom outlet with 1" BSP(F) thread

16" lockable access lid

4" lockable inspection cap

2" fill point

32mm hole with cover for electronic gauge

10 Year Guarantee

This 650-litre capacity slimline environment-friendly bunded oil tank is suitable for the storage of heating oil in a domestic or commercial set up where space is at a premium. Equipped with a range of fittings, including an ultrasonic contents gauge and bottom outlet fitting kit this bottom outlet tank provides a complete solution for a fully compliant installation.

Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing.

Integrally bunded

Bottom outlet with 1" BSP(F) thread

16" lockable access lid

4" lockable inspection cap

2" fill point

32mm hole with cover for electronic gauge

Ultrasonic contents gauge

Bottom outlet fitting kit

LRC overfill prevention probe

Inner tank vent

This 650-litre capacity slimline environment-friendly bunded oil tank by Harlequin is suitable for the storage of heating oil in a domestic or commercial set up where space is at a premium. Equipped with a range of fittings, including an ultrasonic contents gauge and Tanktop top offtake fitting this top outlet tank provides a complete solution for a fully compliant installation.

Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing.

The Harlequin 650ITT comes complete with -

Atkinson Tanktop top offtake fitting (c/w integral anti-siphon valve, non-return valve, 50Mic filter & priming button)

16" lockable access lid

4" lockable inspection cap

2" BSP fill point

32mm hole with cover for electronic gauge

Ultrasonic contents gauge

LRC overfill prevention probe

Inner tank vent

Moulded-in handles

10 year guarantee

Backed by a 10 year guarantee, this Plastic Bunded Heating Oil Tank by ATLAS is designed & Manufactured in Britain for a long lasting solution to your oil storage needs. 

The Atlas 650BSA comes complete with -

Bottom Outlet Kit

Overfill Prevention Valve

Watchman Sonic Gauge

4" Insepction Screw Lid

2" Tank Vent

Lockable Lid

10 year guarantee

This 1000 litre plastic bunded oil tank is designed for the safe storage of heating oil in domestic and commercial environments. Thanks to its slimline design it's ideal for use where there isn't much space available.

The oil tank is rotationally moulded from medium density polyethylene (MDPE) making it lightweight, durable and corrosion resistant. The tank fully complies with all neccasary regulations and guidelines.

Specification -

16" Diameter lockable access lid

4" Lockable inspection port

2" Steel fill point with cap

32mm pre-drilled hole for electronic gauges

Inner tank vent

10 year warranty

Moulded in lifting handles

1" BSP bottom outlet fitting

The 1000 litre bunded heating oil tank from Carbery is an ideal choice for small domestic installations thanks its super slim profile, relatively low weight and 1000 litre capacity.

All Carbery bunded tanks come backed by a 10 year warranty and free delivery (exclusions apply, please see below)

This tank is EN13341 Compliant, OFCERT approved and manufactured to ISO Standards.

Supplied with -

• 2” lockable oil tank fill point
• 5” lockable oil tank inspection point
• 2” fuel tank vent
• Lockable access lid
• 32mm electronic gauge point
• Contents Dipstick
• 1” BSP bottom outlet

Free delivery on Carbery Tanks includes delivery within mainland UK, but excludes the following postcodes - AB, BT, DD, DG, EH, FK, G, HS, IM, IV, KA, KW, KY, ML, PA, PH, TD, TR and ZE. Please contact us for delivery costs to these postcode areas.

This 1000 Litre Rototek 3C Centurion Bunded Oil Tank is ideal for the safe, secure and environmentally responsible storage of heating oil. Rotationally moulded in the United Kingdom from a high grade Medium Density Polyethylene which is tough, durable and UV Stabilised to prevent colour fade.

The tanks come fully assembled and with an optional installation kit, making the tank simple and ready to install by an approved engineer.*

*Please note that all oil tanks should be installed by a suitably competent person in accordance with statutory requirements.

These bunded oil tanks come with a 10 year warranty if installed by an Oftec Approved Engineer and subsequently inspected annually by an Oftec Approved Engineer.

Standard fittings and parts supplied with the tank:

1” BSP Bottom Outlet

2 x 2 Inch Vents

Lockable Manhole Lid

4” Inspection aperture with lockable screw cap

Optional Fittings:

Apollo Bund alarm with plug in receiver

Float Level Gauge

Atkinson Installation Kit Comprising of:

1-0.5 inch reducer

Fuel Filter with lever type isolation valve

PTFE and Heldite thread sealant

Diamond tanks are manufactured by Harlequin MFG and meet all regulatory requirements as well as being fully bunded.

Excellent Design - specially designed for those awkward installations, the range boasts super slimline options along with handles for easy moving and heavy duty lids on all models.

Integrally Bunded - designed to protect the surrounding environment, all tanks are bunded preventing polution if the internal tank was ever to leak.

Non Corrosive - manufactured from Medium Density Polyethylene (MDPE) your Harlequin tank will not corrode.

10 Year Guarantee (upon registration with Harlequin)

Meets Regulations - as well as being fully bunded, each tank meets all relevant regulatory requirements.

Contents Monitoring - each model has a 32mm hole suitable for fitting an electronic gauge, also available as an optional extra.

Harlequin Tanks are the leading manufacturer of plastic rotationally moulded tanks, their knowledge and expertise allow them to manufacture the highest quality plastic tanks and affordable prices.

This 1000-litre capacity slimline environment-friendly bunded oil tank is suitable for the storage of heating oil in a domestic or commercial set up. It’s ideal for use when space is at a premium and additional tank technology is not a requirement.

Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing. Moulded in handles allow for the tank to be transported quite easily.

The Harlequin 1000HQI Comes compelte with -

Integrally bunded

Bottom outlet with 1" BSP(F) thread

16" lockable access lid

4" lockable inspection cap

2" fill point

32mm hole with cover for electronic gauge

Inner tank vent

10 Year Guarantee