Water Settlement Tanks

Water settlement tanks are used to remove the silt contaminants from water being pumped from ground holes, allowing unwanted waste water to be discharged in accordance with environmental agency guidelines PPG1.

Inlet ports: 1 x 4” & 1 x 6” female bauer connector

Outlet: 2 x 6” male bauer connector

Drain points: 3 x 3"

Four point lifting (empty only).

Fork lift pockets

The Clear Flow De Silter Box is specifically designed to provide effective separation of suspended solids (silt) from water being pumped from ground sources such as construction sites, rivers, bore holes etc.

Pumped water passes through the De Silter via a Lamella plate box which separates the solids contained within the water allowing them to drop into the discharge chamber below which can be easily emptied at ground level without the need to take the unit offline like conventional settlement tanks. Making them more suitable for applications where continual operation is required.

The Lamella plate box also helps to separate oily residue from the silt forcing it to float on the top of the contained water and can easily be removed by adding a skimmer pillow or similar absorbing mat. The Lamella box is easily removed and cleaned if required.

Four low level lash down points for ease of strapping whilst in transit.

Available with 4” – 6” or 8” flanged connection. NP16 Flange Type.

Four low level lifting points allowing easy positioning.

Full length fork lift pockets for easy positioning / loading.

Compliancy

PPG26

Water settlement tanks are used to remove the silt contaminants from water being pumped from ground holes, allowing unwanted waste water to be discharged in accordance with environmental agency guidelines PPG1.

Inlet ports: 1 x 4” & 1 x 6” female bauer connector

Outlet: 2 x 6” male bauer connector

Drain points: 3 x 3"

Four point lifting (empty only).

Fork lift pockets

Water settlement tanks are used to remove the silt contaminants from water being pumped from ground holes, allowing unwanted waste water to be discharged in accordance with environmental agency guidelines PPG1.

Inlet ports: 1 x 4” & 1 x 6” female bauer connector

Outlet: 2 x 6” male bauer connector

Drain points: 3 x 3"

Four point lifting (empty only).

Fork lift pockets

Water settlement tanks are used to remove the silt contaminants from water being pumped from ground holes, allowing unwanted waste water to be discharged in accordance with environmental agency guidelines PPG1.

Inlet ports: 1 x 4” & 1 x 6” female bauer connector

Outlet: 2 x 6” male bauer connector

Drain points: 3 x 3"

Four point lifting (empty only).

Fork lift pockets

Water settlement tanks are used to remove the silt contaminants from water being pumped from ground holes, allowing unwanted waste water to be discharged in accordance with environmental agency guidelines PPG1.

Inlet ports: 1 x 4” & 1 x 6” female bauer connector

Outlet: 2 x 6” male bauer connector

Drain points: 3 x 3"

Four point lifting (empty only).

Fork lift pockets