Mechanical Flow Meters

The Piusi K90 Fuel Flow Meter is a nutating disk mechanical meter with a large mechanical display to make it easier to see the quantity of fuel that has been dispensed. Unlike other flow meters the Piusi K90 has a 90 degree inlet and outlet which can't be rotated, please view the image and choose the orientation which suits you best.

The K90 mechanical flow meter is a patented design by Piusi and is one of the most accurate mechanical flow meters at +/- 0.6% accuracy.

Please note: This flow meter does not have threaded ports and flanges are required to connect to other equipment (Sold separately)

The K33 is a mechanical flow meters suitable for the monitoring of diesel, It has a partial indicator with 3 digits (max. 999 Litres), with a total of 6 digits.

PRECISION AND QUALITY

The K33 mechanical diesel flow meter have been designed for precise measurement of the quantity of fuels dispensed for non-commercial use. Easy to calibrate and install, the K33 flow meter can monitor the quantity dispensed for a maximum flow rate of 20-120 l/min and with a maximum working pressure of the pump of 10 bar. In addition, it can guarantee a burst pressure of 30 bar with a metering accuracy of +/- 1%.

RELIABILITY

The K33 mechanical flow meter for diesel is easy to calibrate at the place of installation and is suitable for installation on pumps or service stations for diesel, for those who want to keep the amount of dispensed fluid monitored without special needs for storage.

It is reliable and an economic mechanical flow meter that can also be used by gravity, thanks to the low resistance to flow.

The SAMOA Mechanical Nutating Disk Flow Meter is suitable for high-accuracy monitoring of diesel & Comes fitted with a 3 digit resettable totaliser (99.9L Max) & a 6 Digit non resettable totaliser. This Mechanical Flow Meter from SAMOA is suitable for gravity fed applications with a minimum flow of 20 litres per minute & has a very low pressure drop.

The meter allows to orientate the inlet and outlet in four different positions.

Maximum working pressure: 10 bar

Flow range: 20 to 100 litre/min

Precision after calibration: +/- 1%

The FMT Mechanical Oval Gear Flow Meter is suitable for high-accuracy monitoring of diesel & low viscosity oils. Fitted with a 3 digit resettable totaliser (99.9L Max) & a 6 Digit non resettable totaliser, this Mechanical Flow Meter from FMT is suitable for most fuel installations.

The K44 is a mechanical flow meters suitable for the monitoring of diesel, It has a partial indicator with 4 digits (max. 9999 Litres), with a total of 7 digits.

PRECISION AND QUALITY

The K44 mechanical diesel flow meter have been designed for precise measurement of the quantity of fuels dispensed for non-commercial use. Easy to calibrate and install, the K44 flow meter can monitor the quantity dispensed for a maximum flow rate of 20-120 l/min and with a maximum working pressure of the pump of 10 bar. In addition, it can guarantee a burst pressure of 30 bar with a metering accuracy of +/- 1%.

RELIABILITY

The K44 mechanical flow meter for diesel is easy to calibrate at the place of installation and is suitable for installation on pumps or service stations for diesel, for those who want to keep the amount of dispensed fluid monitored without special needs for storage.

It is reliable and an economic mechanical flow meter that can also be used by gravity, thanks to the low resistance to flow.

The SAMOA Mechanical Nutating Disk Flow Meter is suitable for high-accuracy monitoring of diesel & Comes fitted with a 4 digit resettable totaliser (999.9L Max) & a 6 Digit non resettable totaliser. This Mechanical Flow Meter from SAMOA is suitable for gravity fed applications with a minimum flow of 20 litres per minute & has a very low pressure drop.

The meter allows to orientate the inlet and outlet in four different positions.

Maximum working pressure: 10 bar

Flow range: 20 to 100 litre/min

Precision after calibration: +/- 1%

The K33 BIO is the Biodiesel version of the market leading Piusi K33. This meter features the same construction and mechanical properties as the K33, but is stronger as it has to resist the different blends of biodiesel up to B100. With an accuracy of +/-1% and repeatability of 0.3%, the Piusi K33 BIO is an ideal solution for installation with pumps or dispensers for those who need to monitor the quantity of diesel dispensed.

The K33 ATEX is a mechanical flow meter suitable for the monitoring of diesel, gasoline and kerosene. For non-commercial use, the K33 ATEX meets the ATEX requirements for precise measurement of the quantity of Gasoline, kerosene and diesel dispensed in environments with a high risk of explosion.

The ATEX mechanical flow meter has a 3-digit partial indicator, and a 6 digit totaliser.

PRECISION AND QUALITY

The K33 ATEX mechanical flow meter for gasoline, kerosene and diesel has been designed to ensure precise measurement of the amount of fuel dispensed. Easy to calibrate and install, the K33 ATEX flow meter can monitor the quantity of fuel dispensed for a maximum flow rate of 20-120 l/min and with a maximum working pressure of the pump of 3.5 bar. In addition, it can guarantee a burst pressure of 28 bar with a metering accuracy of +/- 1%.

RELIABILITY

The K33 ATEX mechanical flow meter for gasoline, kerosene and diesel is suitable for application to pumps or gasoline dispensers and is suitable for those who are looking for a simple and economic product, without particular need for control over the fleet of vehicles. The K33 ATEX can be installed in any position on both rigid and flexible pipes, as well as directly on pumps or tanks. It can also be used by gravity, thanks to its low resistance to flow.

The K33 ATEX as an ATEX flow meter is included in group II, category 2 G IIB T=85°C (T6), and therefore it is suitable for working in areas classified as "1" and "2" according to directive 99/92/EC.

The range of PIUSI mechanical flow meters has been expanded with the new K150, the medium-high flow meter suitable for measuring fuel dispenses.

Suitable for heavy-duty environments
The K150 mechanical flow meter is specifically designed to be used where a high flow rate is required, for example in those sectors that need to operate on vehicles with large tanks.

The K150 is perfect in the agricultural sector for the supply of machinery and heavy vehicles, in the logistics sector for trucks, and in the construction sector for off-road vehicles.

Laboratory tested with 4 million litres delivered, the mechanical high flow K150 ensures a flow range between 25 and 150 l/min. The K150 differs from other PIUSI flow meters, including the K44 and K33 suitable for lower flow rates and the K700 suitable for flow rates up to 220 l/min.

Precision, a basic feature
Equipped with an oscillating disc reading system, the K150 high flow mechanical meter is accurate on the flow measurement Indication of the fuel delivered. This system also guarantees an accuracy of ±1% on the average flow rates.

Up to 33% less pressure drop
For professionals it is essential to have reliable and durable tools. The K150 high-flow meter stands out from other flow meters on the market because it guarantees up to 33% less pressure drop.

Resistance and reliability over time
The mechanical K150 high flow rate meter is an accurate product in presence of constant flows. It is easy to use and quick to calibrate. It is equipped with a 4-digit volumetric counter.

The robust aluminium body ensures great resistance to high pressures and wear. It has been designed to ensure constant calibration over time and low maintenance costs.

Not suitable for measuring products for the general public.

The Fill-Rite nutating disc mechanical flow meter, 807C features a large & easy to read 3 digit display with a 6 digit totaliser. 

This 3 wheel mechanical meter is suitable for transfer pumps with a flow rate of 20-75 litres per minute and is compatible with a wide range of fluids.

Certified to Atex EX II 2G C T6

The mechanical K150 ATEX high flow meter completes the PIUSI range dedicated to fuel measurement.

Perfect for heavy-duty environments -
The K150 ATEX high capacity mechanical meter is ideal for heavy-duty applications.

Perfect in the agricultural sector for refuelling heavy vehicles and machinery, the K150 ATEX high capacity mechanical meter is suitable for all those sectors that need to operate on vehicles with large tanks.

In addition to the agricultural sector, the K150 ATEX flow meter is also perfect in the Logistics industry for trucks and in the construction industry for earthmoving machinery.

Flow rate range from 25 to 150 l/min

The K150 ATEX high flow mechanical flow meter is equipped with an oscillating disc reading system that guarantees ±1% accuracy in measuring the fuel delivered at medium flow rates.

ATEX IECEx certified

The K150 mechanical flow meter meets the ATEX/IECEx requirements for the use of materials in potentially explosive atmospheres. The K150 ATEX can therefore be used for monitoring the flow of explosive liquids such as petrol and kerosene.

Up to 33% less pressure drop -
The K150 high capacity mechanical flow meter differs from other meters on the market, because it ensures up to 33% less pressure drop.

Resistant and reliable over time
At constant flow rates, the K150 high flow mechanical flow meter is accurate and reliable. Equipped with a 4-digit volumetric counter, it is simple to use easy to calibrate.

The high resistance to high pressures and wear is guaranteed by the robust aluminium body.

Compatibility with other fluids -
Diesel, B7, B20, Kerosene, Petrol, Petrol E20, Avgas 100/100LL, JetA/A1, Aspen 2/4

Not suitable for measuring products for the general public.

The Piusi K44 Fuel Pulse Meter was developed to accurately count how much diesel has been used, using a nutating disk system. This Piusi diesel pulse meter is suitable for use in industrial applications where fluid delivery control is required at highly accurate levels. They can also be used in conjunction with a non-commercial fuel delivery pump either part of or externally inline. The K44 fuel flow meter with pulse output is a cost effective solution to measuring the flow of fuel up to 9999.9 litres at a time. Thanks to their wide flow range, these Piusi flow meters are compatible with a range of pumping installations.