Water Pumps

The Pedrollo TOP MULTI-AD is a high quality multi stage submersible pump manufactured in Italy. The TOP MULTI-AD is designed to pump clean liquid which is defined according to ISO 22241 as AUS 32 (Aqueous Urea Solution 32.5%).

This liquid is equivalent to other commercial trademarks known as - AdBlue, DEF & Arla 32.

Delivery Body - Glass fibre reinforced technopolymer, complete with threaded ports in compliance with ISO 228/1.

Suction Filter - Glass fibre reinforced technopolymer.

Stage Casing - Glass fibre reinforced technopolymer.

Impeller - Noryl FE1520PW.

Diffuser - Noryl FE1520PW with anti-wear ring.

Vane Diffuser - Glass fibre reinforced technopolymer.

Motor Casing - Stainless Steel AISI 304.

Motor Casing Plate - Stainless Steel AISI 304.

Motor Shaft - Stainless Steel AISI 304.

Shaft with Double Seal - Silicone Carbide (stationary ring), Graphite (rotational ring) & EPDM

Outlet - 11/4" F BSP with Flap-check valve

The Pedrollo PLURIJET 6/90X is a self priming, multi-stage pump manufactured in Italy. The PLURIJET series are suitable for use with Clean water that doesn't contain any particles or with any liquids that aren't aggressive towards the materials the pump is made from.

Due to their silence, reliability & low power consumption, the PLURIJET 90 is recommended for domestic & civil applications, in particular for pressurising and distributing water in combination with pressure tanks.

Pump Body - Stainless steel AISI 304 complete with threaded ports in compliance with ISO 228/1

Body Backplate - Stainless steel AISI 304

Impellers - Noryl FE1520PW

Diffusers - Stainless steel AISI 304

Motor Shaft - Stainless steel EN10088-3 - 01.4104

Mechanical Seal - Graphite (stationary ring), Ceramic (rotational ring) & NBR

Inlet - 1-1/4 " F BSP

Outlet - 1" F BSP

This diaphragm pump is designed as a bilge pump for surface mounting on the deck/bulkhead. Thanks to it's innovative design, the pump body & ports can be positioned in 96 different ways to ensure flexibility. 

As this is a diaphragm pump, it can be used with dirty fuels with solids up to 12.5mm (with 1” hose tails) or 18mm (with 1½ ” hose tails).

The Pedrollo PLURIJET 90 is a self priming, multi-stage pump manufactured in Italy. The PLURIJET series are suitable for use with Clean water that doesn't contain any particles or with any liquids that aren't aggressive towards the materials the pump is made from.

Due to their silence, reliability & low power consumption, the PLURIJET 90 is recommended for domestic & civil applications, in particular for pressurising and distributing water in combination with pressure tanks.

Pump Body - Stainless steel AISI 304 complete with threaded ports in compliance with ISO 228/1

Body Backplate - Stainless steel AISI 304

Impellers - Stainless steel AISI 304

Diffusers - Stainless steel AISI 304

Motor Shaft - Stainless steel AISI 431

Mechanical Seal - Graphite (stationary ring), Ceramic (rotational ring) & NBR

Inlet - 1-1/4 " F BSP

Outlet - 1" F BSP

The Pedrollo CK 50 is a high quality liquid ring pump manufactured in Italy. The CK series are suitable for use with Diesel, Clean water that doesn't contain any particles or with any liquids that aren't aggressive towards the materials the pump is made from.

Due to the specific principle of their operating performance, the Pedrollo CK 50 is an excellent solution in every case where a compact, self priming pump is required or where the fluid flow is irregular or contains air. 400v & model with bypass available on request.

Pump Body - Cast iron complete with threaded ports in compliance with ISO 228/1

Motor Bracket - Aluminium with brass insert (patented), reduces the risk of impeller seizure

Impeller - Brass star type with open radial vanes

Motor Shaft - Stainless steel EN 10088-3 - 1.4104

Mechanical Seal - Ceramic (stationary ring), Graphite (rotational ring) & Viton

Inlet / Outlet - 3/4" F BSP

The Piusi Amalfi Water Transfer Pump is a self-priming flexible impeller pump suitable for the transfer of clean, dirty and sale water. Thanks to its flexible impeller design, the Amalfi Piusi pump is capable of handling solid particles and debris without causing damage to the pump. There are both mains and low voltage versions available, with the low voltage version being traditionally designed for the pumping of bilge water in marine applications.

This brand new Honda 1” Engine Driven Transfer Pump is designed for the high flow transfer of water. This small and compact multipurpose pump includes two parts that are from well-known industry manufacturers. Firstly it’s powered by a genuine Honda GX25 Engine and secondly, it has a Tsurumi pump head – making it high quality, reliable and durable. The Honda Engine Driven Pump has a high flow rate of 140lpm and is suitable for pumping and water. The diesel and water pump is engine powered, ideal for when mains power is unavailable, making it ideal for use on quarries, construction sites and other heavy duty environments. This water and diesel transfer pump can be used for processes including emptying tanks and IBCs and transferring from one bulk container to another.