x Items in my bag 0
    Menu
    Menux

    Fuel Storage Tanks

    When you need to store fuel on site, a high quality and reliable tank is essential. At Northern Tank Store we supply a comprehensive range of tanks and solutions to meet almost any fuel storage requirement, including bunded options in steel and plastic with capacities up to 60,000 litres.

    Filter By
    quick view
    1400 Litre Diamond Slimline Bunded Oil Tank
    D
    K
    O
    HVO

    1400 Litre Diamond Slimline Bunded Oil Tank

    Availability Approx 10-20 Days
    Price £1,609.00
    Our Price £1,395.00 £1,674.00 inc VAT
    You Save £214.00 (13%)
    Options

    Diamond tanks are manufactured by Harlequin MFG and meet all regulatory requirements as well as being fully bunded.

    Excellent Design - specially designed for those awkward installations, the range boasts super slimline options along with handles for easy moving and heavy duty lids on all models.

    Integrally Bunded - designed to protect the surrounding environment, all tanks are bunded preventing polution if the internal tank was ever to leak.

    Non Corrosive - manufactured from Medium Density Polyethylene (MDPE) your Harlequin tank will not corrode.

    10 Year Guarantee (upon registration with Harlequin)

    Meets Regulations - as well as being fully bunded, each tank meets all relevant regulatory requirements.

    Contents Monitoring - each model has a 32mm hole sutiable for fitting an electronic gauge, also available as an optional extra.

    read more...
    quick view
    2500 Litre NTS Steel Bunded Heating Oil Tank
    D
    K
    O
    HVO

    2500 Litre NTS Steel Bunded Heating Oil Tank

    Availability In stock
    Price £2,619.62 £3,143.54 inc VAT
    Tank Stands
    Contents Gauge

    Our range of DLC Steel Bunded Heating Oil Tanks are dual purpose, all steel tanks that has been designed specifically for domestic and light commercial users. The DLC range can easily be upgraded to become a fuel dispensing tank by simply adding a cabinet and pump, you can order this by searching for 'DLCC'.

    This 2,500 litre Steel Bunded Oil Tank is manufactured in 3 parts to enable easy disassembly and reassembly on site, allowing these tanks to be installed in even the most hard to reach places.

    The DLC range of Bunded Oil Tanks can be supplied with steel base supports, this eliminates direct contact with the ground. Steel section supports are available to run length or width ways to allow them to be positioned to match existing tank bases. Alternatively, they can be supplied with a variety of Steel Tank Stands which are perfectly suited to gravity feed applications.

    These Bunded Steel Oil Tanks have a dual purpose fill/vent which can be used to view the tank's contents. The tank vents directly to the tank bund and then to the atmosphere removing the risk of spills occurring when filling the tank.

    Northern Tank Stores DLC Range of Bunded Oil Tanks come with a 1” bottom outlet and lockable isolation valve. There is a 1½” BSP and a 2” BSP socket located underneath the lockable tank hatch, this allows additional items such as gauges & alarms to be fitted. The lockable lid keeps the tank contents safe and secure.

    Compliance:

    Control of pollution (oil storage) (England) regulations 2001, PPG2, PPG26 and BS799 pt5.

    read more...
    quick view
    5,000 Litre NTS Cylindrical Diesel Fuel Tank
    D
    K
    O
    HVO
    B1

    5,000 Litre NTS Cylindrical Diesel Fuel Tank

    Availability Built to Order
    Price £17,274.00 £20,728.80 inc VAT
    Cabinet

    This Horizontal, cylindrical bulk diesel tank with a double skin design is constructed from mild steel plate to BS EN 10025.

    The inner tank provides the required storage area, whilst the outer tank forms the required bund with capacity of 110% of the total liquid being stored. The tank vent is piped into the bund and then to the atmosphere further reducing the risk of spills in the event of overfilling the tank.

    These tanks are fitted with steel base supports to eliminate ground contact with the tank base.

    This Cylindrical fuel tank can be supplied with either a lockable fill point cabinet or full size inset cabinet to house any ancillary equipment fitted with lockable steel or roller shutter door.

    Specification:

    1 x 2” tank to bund vent.   1 x 2” atmospheric vent with cap.   1 x Bund contents test and drain point with dial gauge. 1 x 2” Base feed with isolation valve.   1 x 2” Top feed with foot valve and strainer.   1 x 2” socket for tank contents. 1 x 2” Socket fill point.   4 x lift points (lift empty only).   1 x 1” socket in bund for optional bund alarm probe.

    1 x 2” socket in top of tank for optional high / low alarm probes.     1 x 600mm Service hatch.     Base support: Tank support cradles with ground anchor points.

    Paint finish: ISO 12944 C3 Compliant coating. Application design life: 7 years. Typical environments include: Urban and industrial atmospheres, Moderate sulphur dioxide levels, production areas with humidity.

    Compliancy:

    BS799 Part 5. PPG2, DSEAR 2002

    Control of Pollution (Oil Storage) (England) Regulations,

    Environment (Oil Storage) (Scotland) Regulations,

    Control of Pollution (Oil Storage) Regulations (Northern Ireland),

    Control of Pollution (Oil Storage) (Wales) Regulations.

    read more...
    quick view
    7,500 Litre NTS Cylindrical Diesel Fuel Tank
    D
    K
    O
    HVO
    B1

    7,500 Litre NTS Cylindrical Diesel Fuel Tank

    Availability Built to Order
    Price £18,606.00 £22,327.20 inc VAT
    Cabinet

    This Horizontal, cylindrical bulk diesel tank with a double skin design is constructed from mild steel plate to BS EN 10025.

    The inner tank provides the required storage area, whilst the outer tank forms the required bund with capacity of 110% of the total liquid being stored. The tank vent is piped into the bund and then to the atmosphere further reducing the risk of spills in the event of overfilling the tank.

    These tanks are fitted with steel base supports to eliminate ground contact with the tank base.

    This Cylindrical fuel tank can be supplied with either a lockable fill point cabinet or full size inset cabinet to house any ancillary equipment fitted with lockable steel or roller shutter door.

    Specification:

    1 x 2” tank to bund vent.   1 x 2” atmospheric vent with cap.   1 x Bund contents test and drain point with dial gauge. 1 x 2” Base feed with isolation valve.   1 x 2” Top feed with foot valve and strainer.   1 x 2” socket for tank contents. 1 x 2” Socket fill point.   4 x lift points (lift empty only).   1 x 1” socket in bund for optional bund alarm probe.

    1 x 2” socket in top of tank for optional high / low alarm probes.     1 x 600mm Service hatch.     Base support: Tank support cradles with ground anchor points.

    Paint finish: ISO 12944 C3 Compliant coating. Application design life: 7 years. Typical environments include: Urban and industrial atmospheres, Moderate sulphur dioxide levels, production areas with humidity.

    Compliancy:

    BS799 Part 5. PPG2, DSEAR 2002

    Control of Pollution (Oil Storage) (England) Regulations,

    Environment (Oil Storage) (Scotland) Regulations,

    Control of Pollution (Oil Storage) Regulations (Northern Ireland),

    Control of Pollution (Oil Storage) (Wales) Regulations.

    read more...
    quick view
    10,000 Litre NTS Cylindrical Diesel Fuel Tank
    D
    K
    O
    HVO
    B1

    10,000 Litre NTS Cylindrical Diesel Fuel Tank

    Availability Built to Order
    Price £21,327.00 £25,592.40 inc VAT
    Cabinet

    This Horizontal, cylindrical bulk diesel tank with a double skin design is constructed from mild steel plate to BS EN 10025.

    The inner tank provides the required storage area, whilst the outer tank forms the required bund with capacity of 110% of the total liquid being stored. The tank vent is piped into the bund and then to the atmosphere further reducing the risk of spills in the event of overfilling the tank.

    These tanks are fitted with steel base supports to eliminate ground contact with the tank base.

    This Cylindrical fuel tank can be supplied with either a lockable fill point cabinet or full size inset cabinet to house any ancillary equipment fitted with lockable steel or roller shutter door.

    Specification:

    1 x 2” tank to bund vent.   1 x 2” atmospheric vent with cap.   1 x Bund contents test and drain point with dial gauge. 1 x 2” Base feed with isolation valve.   1 x 2” Top feed with foot valve and strainer.   1 x 2” socket for tank contents. 1 x 2” Socket fill point.   4 x lift points (lift empty only).   1 x 1” socket in bund for optional bund alarm probe.

    1 x 2” socket in top of tank for optional high / low alarm probes.     1 x 600mm Service hatch.     Base support: Tank support cradles with ground anchor points.

    Paint finish: ISO 12944 C3 Compliant coating. Application design life: 7 years. Typical environments include: Urban and industrial atmospheres, Moderate sulphur dioxide levels, production areas with humidity.

    Compliancy:

    BS799 Part 5. PPG2, DSEAR 2002

    Control of Pollution (Oil Storage) (England) Regulations,

    Environment (Oil Storage) (Scotland) Regulations,

    Control of Pollution (Oil Storage) Regulations (Northern Ireland),

    Control of Pollution (Oil Storage) (Wales) Regulations.

    read more...
    quick view
    15,000 Litre NTS Cylindrical Diesel Fuel Tank
    D
    K
    O
    HVO
    B1

    15,000 Litre NTS Cylindrical Diesel Fuel Tank

    Availability Built to Order
    Price £23,961.00 £28,753.20 inc VAT
    Cabinet

    This Horizontal, cylindrical bulk diesel tank with a double skin design is constructed from mild steel plate to BS EN 10025.

    The inner tank provides the required storage area, whilst the outer tank forms the required bund with capacity of 110% of the total liquid being stored. The tank vent is piped into the bund and then to the atmosphere further reducing the risk of spills in the event of overfilling the tank.

    These tanks are fitted with steel base supports to eliminate ground contact with the tank base.

    This Cylindrical fuel tank can be supplied with either a lockable fill point cabinet or full size inset cabinet to house any ancillary equipment fitted with lockable steel or roller shutter door.

    Specification:

    1 x 2” tank to bund vent.   1 x 2” atmospheric vent with cap.   1 x Bund contents test and drain point with dial gauge. 1 x 2” Base feed with isolation valve.   1 x 2” Top feed with foot valve and strainer.   1 x 2” socket for tank contents. 1 x 2” Socket fill point.   4 x lift points (lift empty only).   1 x 1” socket in bund for optional bund alarm probe.

    1 x 2” socket in top of tank for optional high / low alarm probes.     1 x 600mm Service hatch.     Base support: Tank support cradles with ground anchor points.

    Paint finish: ISO 12944 C3 Compliant coating. Application design life: 7 years. Typical environments include: Urban and industrial atmospheres, Moderate sulphur dioxide levels, production areas with humidity.

    Compliancy:

    BS799 Part 5. PPG2, DSEAR 2002

    Control of Pollution (Oil Storage) (England) Regulations,

    Environment (Oil Storage) (Scotland) Regulations,

    Control of Pollution (Oil Storage) Regulations (Northern Ireland),

    Control of Pollution (Oil Storage) (Wales) Regulations.

    read more...
    quick view
    1650 Litre Diamond Horizontal Bunded Oil Tank
    D
    K
    O
    HVO

    1650 Litre Diamond Horizontal Bunded Oil Tank

    Availability Approx 10-20 Days
    Price £1,579.00
    Our Price £1,370.00 £1,644.00 inc VAT
    You Save £209.00 (13%)
    Options

    Diamond tanks are manufactured by Harlequin MFG and meet all regulatory requirements as well as being fully bunded.

    Excellent Design - specially designed for those awkward installations, the range boasts super slimline options along with handles for easy moving and heavy duty lids on all models.

    Integrally Bunded - designed to protect the surrounding environment, all tanks are bunded preventing pollution if the internal tank was ever to leak.

    Non Corrosive - manufactured from Medium Density Polyethylene (MDPE) your Harlequin tank will not corrode.

    10 Year Guarantee (upon registration with Harlequin)

    Meets Regulations - as well as being fully bunded, each tank meets all relevant regulatory requirements.

    Contents Monitoring - each model has a 32mm hole suitable for fitting an electronic gauge, also available as an optional extra.

    read more...
    quick view
    22,000 Litre NTS Cylindrical Diesel Fuel Tank
    D
    K
    O
    HVO
    B1

    22,000 Litre NTS Cylindrical Diesel Fuel Tank

    Availability Built to Order
    Price £29,006.00 £34,807.20 inc VAT
    Cabinet

    This Horizontal, cylindrical bulk diesel tank with a double skin design is constructed from mild steel plate to BS EN 10025.

    The inner tank provides the required storage area, whilst the outer tank forms the required bund with capacity of 110% of the total liquid being stored. The tank vent is piped into the bund and then to the atmosphere further reducing the risk of spills in the event of overfilling the tank.

    These tanks are fitted with steel base supports to eliminate ground contact with the tank base.

    This Cylindrical fuel tank can be supplied with either a lockable fill point cabinet or full size inset cabinet to house any ancillary equipment fitted with lockable steel or roller shutter door.

    Specification:

    1 x 2” tank to bund vent.   1 x 2” atmospheric vent with cap.   1 x Bund contents test and drain point with dial gauge. 1 x 2” Base feed with isolation valve.   1 x 2” Top feed with foot valve and strainer.   1 x 2” socket for tank contents. 1 x 2” Socket fill point.   4 x lift points (lift empty only).   1 x 1” socket in bund for optional bund alarm probe.

    1 x 2” socket in top of tank for optional high / low alarm probes.     1 x 600mm Service hatch.     Base support: Tank support cradles with ground anchor points.

    Paint finish: ISO 12944 C3 Compliant coating. Application design life: 7 years. Typical environments include: Urban and industrial atmospheres, Moderate sulphur dioxide levels, production areas with humidity.

    Compliancy:

    BS799 Part 5. PPG2, DSEAR 2002

    Control of Pollution (Oil Storage) (England) Regulations,

    Environment (Oil Storage) (Scotland) Regulations,

    Control of Pollution (Oil Storage) Regulations (Northern Ireland),

    Control of Pollution (Oil Storage) (Wales) Regulations.

    read more...
    quick view
    27,000 Litre NTS Cylindrical Diesel Fuel Tank
    D
    K
    O
    HVO
    B1

    27,000 Litre NTS Cylindrical Diesel Fuel Tank

    Availability Built to Order
    Price £31,436.00 £37,723.20 inc VAT
    Cabinet

    This Horizontal, cylindrical bulk diesel tank with a double skin design is constructed from mild steel plate to BS EN 10025.

    The inner tank provides the required storage area, whilst the outer tank forms the required bund with capacity of 110% of the total liquid being stored. The tank vent is piped into the bund and then to the atmosphere further reducing the risk of spills in the event of overfilling the tank.

    These tanks are fitted with steel base supports to eliminate ground contact with the tank base.

    This Cylindrical fuel tank can be supplied with either a lockable fill point cabinet or full size inset cabinet to house any ancillary equipment fitted with lockable steel or roller shutter door.

    Specification:

    1 x 2” tank to bund vent.   1 x 2” atmospheric vent with cap.   1 x Bund contents test and drain point with dial gauge. 1 x 2” Base feed with isolation valve.   1 x 2” Top feed with foot valve and strainer.   1 x 2” socket for tank contents. 1 x 2” Socket fill point.   4 x lift points (lift empty only).   1 x 1” socket in bund for optional bund alarm probe.

    1 x 2” socket in top of tank for optional high / low alarm probes.     1 x 600mm Service hatch.     Base support: Tank support cradles with ground anchor points.

    Paint finish: ISO 12944 C3 Compliant coating. Application design life: 7 years. Typical environments include: Urban and industrial atmospheres, Moderate sulphur dioxide levels, production areas with humidity.

    Compliancy:

    BS799 Part 5. PPG2, DSEAR 2002

    Control of Pollution (Oil Storage) (England) Regulations,

    Environment (Oil Storage) (Scotland) Regulations,

    Control of Pollution (Oil Storage) Regulations (Northern Ireland),

    Control of Pollution (Oil Storage) (Wales) Regulations.

    read more...
    quick view
    32,000 Litre NTS Cylindrical Diesel Fuel Tank
    D
    K
    O
    HVO
    B1

    32,000 Litre NTS Cylindrical Diesel Fuel Tank

    Availability Built to Order
    Price £33,713.00 £40,455.60 inc VAT
    Cabinet

    This Horizontal, cylindrical bulk diesel tank with a double skin design is constructed from mild steel plate to BS EN 10025.

    The inner tank provides the required storage area, whilst the outer tank forms the required bund with capacity of 110% of the total liquid being stored. The tank vent is piped into the bund and then to the atmosphere further reducing the risk of spills in the event of overfilling the tank.

    These tanks are fitted with steel base supports to eliminate ground contact with the tank base.

    This Cylindrical fuel tank can be supplied with either a lockable fill point cabinet or full size inset cabinet to house any ancillary equipment fitted with lockable steel or roller shutter door.

    Specification:

    1 x 2” tank to bund vent.   1 x 2” atmospheric vent with cap.   1 x Bund contents test and drain point with dial gauge. 1 x 2” Base feed with isolation valve.   1 x 2” Top feed with foot valve and strainer.   1 x 2” socket for tank contents. 1 x 2” Socket fill point.   4 x lift points (lift empty only).   1 x 1” socket in bund for optional bund alarm probe.

    1 x 2” socket in top of tank for optional high / low alarm probes.     1 x 600mm Service hatch.     Base support: Tank support cradles with ground anchor points.

    Paint finish: ISO 12944 C3 Compliant coating. Application design life: 7 years. Typical environments include: Urban and industrial atmospheres, Moderate sulphur dioxide levels, production areas with humidity.

    Compliancy:

    BS799 Part 5. PPG2, DSEAR 2002

    Control of Pollution (Oil Storage) (England) Regulations,

    Environment (Oil Storage) (Scotland) Regulations,

    Control of Pollution (Oil Storage) Regulations (Northern Ireland),

    Control of Pollution (Oil Storage) (Wales) Regulations.

    read more...
    quick view
    42,000 Litre NTS Cylindrical Diesel Fuel Tank
    D
    K
    O
    HVO
    B1

    42,000 Litre NTS Cylindrical Diesel Fuel Tank

    Availability Built to Order
    Price £39,823.00 £47,787.60 inc VAT
    Cabinet

    This Horizontal, cylindrical bulk diesel tank with a double skin design is constructed from mild steel plate to BS EN 10025.

    The inner tank provides the required storage area, whilst the outer tank forms the required bund with capacity of 110% of the total liquid being stored. The tank vent is piped into the bund and then to the atmosphere further reducing the risk of spills in the event of overfilling the tank.

    These tanks are fitted with steel base supports to eliminate ground contact with the tank base.

    This Cylindrical fuel tank can be supplied with either a lockable fill point cabinet or full size inset cabinet to house any ancillary equipment fitted with lockable steel or roller shutter door.

    Specification:

    1 x 2” tank to bund vent.   1 x 2” atmospheric vent with cap.   1 x Bund contents test and drain point with dial gauge. 1 x 2” Base feed with isolation valve.   1 x 2” Top feed with foot valve and strainer.   1 x 2” socket for tank contents. 1 x 2” Socket fill point.   4 x lift points (lift empty only).   1 x 1” socket in bund for optional bund alarm probe.

    1 x 2” socket in top of tank for optional high / low alarm probes.     1 x 600mm Service hatch.     Base support: Tank support cradles with ground anchor points.

    Paint finish: ISO 12944 C3 Compliant coating. Application design life: 7 years. Typical environments include: Urban and industrial atmospheres, Moderate sulphur dioxide levels, production areas with humidity.

    Compliancy:

    BS799 Part 5. PPG2, DSEAR 2002

    Control of Pollution (Oil Storage) (England) Regulations,

    Environment (Oil Storage) (Scotland) Regulations,

    Control of Pollution (Oil Storage) Regulations (Northern Ireland),

    Control of Pollution (Oil Storage) (Wales) Regulations.

    read more...
    quick view
    50,000 Litre NTS Cylindrical Diesel Fuel Tank
    D
    K
    O
    HVO
    B1

    50,000 Litre NTS Cylindrical Diesel Fuel Tank

    Availability Built to Order
    Price £42,621.00 £51,145.20 inc VAT
    Cabinet

    This Horizontal, cylindrical bulk diesel tank with a double skin design is constructed from mild steel plate to BS EN 10025.

    The inner tank provides the required storage area, whilst the outer tank forms the required bund with capacity of 110% of the total liquid being stored. The tank vent is piped into the bund and then to the atmosphere further reducing the risk of spills in the event of overfilling the tank.

    These tanks are fitted with steel base supports to eliminate ground contact with the tank base.

    This Cylindrical fuel tank can be supplied with either a lockable fill point cabinet or full size inset cabinet to house any ancillary equipment fitted with lockable steel or roller shutter door.

    Specification:

    1 x 2” tank to bund vent.   1 x 2” atmospheric vent with cap.   1 x Bund contents test and drain point with dial gauge. 1 x 2” Base feed with isolation valve.   1 x 2” Top feed with foot valve and strainer.   1 x 2” socket for tank contents. 1 x 2” Socket fill point.   4 x lift points (lift empty only).   1 x 1” socket in bund for optional bund alarm probe.

    1 x 2” socket in top of tank for optional high / low alarm probes.     1 x 600mm Service hatch.     Base support: Tank support cradles with ground anchor points.

    Paint finish: ISO 12944 C3 Compliant coating. Application design life: 7 years. Typical environments include: Urban and industrial atmospheres, Moderate sulphur dioxide levels, production areas with humidity.

    Compliancy:

    BS799 Part 5. PPG2, DSEAR 2002

    Control of Pollution (Oil Storage) (England) Regulations,

    Environment (Oil Storage) (Scotland) Regulations,

    Control of Pollution (Oil Storage) Regulations (Northern Ireland),

    Control of Pollution (Oil Storage) (Wales) Regulations.

    read more...
    Fuel Storage Tanks

    Fuel Storage For Commercial Applications

    Fuel storage tanks are primarily used for commercial or agricultural applications, especially where there is a requirement to store a significant volume of fuel on site. For large commercial or agricultural enterprises that require a continuous supply of fuel, installation of a fuel storage tank is the usual solution where travel to a commercial fuel station is not practical. 

    Whatever capacity is needed, Northern Tank Store is here to help. With one of the largest ranges of fuel tanks available we’re able to provide solutions for any requirement. Our range includes high quality steel fuel storage tanks which are perfect for the secure storage of a range of fuels and light oils. We also supply robust plastic fuel storage tanks in a wide range of capacities, all manufactured to meet or exceed applicable regulations.

    Safe & Secure Fuel Storage

    The environmentally hazardous and flammable fuel typically stored in fuel storage tanks make safety and security a top priority at every stage. For example, fuel storage tanks need to prevent leakage and spills which can have a significant environmental impact as well as cost implications. Designed for secure fuel storage over extended periods, our fuel tanks prioritise durability and are built to prevent leakage or spillage when in use.

    When fuel storage tanks are above a certain capacity, they cannot be legally installed if they are not bunded. This means that the fuel is stored in an inner chamber within the tank itself. Northern Tank Store can advise on this as well as other legal requirements that may apply to your site, and we supply a wide range of bunded fuel storage tanks in all capacities, as well as heating oil tanks should you need to store fuel for a heating system on your property.

    Bespoke Fuel Storage Solutions

    The vast range of commercial and agricultural applications mean that when it comes to fuel storage, nearly every site will have its own specific legal and professional requirements regarding the design of the tank. Unlike most of our competitors, at Northern Tank Store we have an experienced in-house design team and one of the UK’s most established manufacturing facilities. This means we can supply bespoke diesel storage tanks and solutions that have been designed to meet specific needs. 

    Whatever the individual specifications of your property or business, Northern Tank Store can provide the perfect fuel storage solution, ensuring full compliance with all applicable legislation and regulations.

     


    TOP
    CLOSE X
    Thank you for subscribing to our newsletter