Static Generator Fuel Tanks

All steel constructed road towable bowser, fitted with auto reverse brakes, hydraulically clamped over run hitch, mud guards, mud flaps, rear and side lights, jockey wheel and interchangeable tow hitch /eye. Fitted with a mild steel rigid container (IBC), with steel portable bund, with top lifting facility. Fully removable outer lid with hinged lid providing full access to internal IBC. Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.  The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored and facilitates any distribution pumps required.

Compliancy:

Certified in accordance with Directive 2007/46/EC European Community Whole Vehicle Type Approval (ECWVTA)

EC type-approval number: e11*2007/46*0645*00

Certified to UN 1202 (for road haulage) Certificate No:  5262

Issue number and date: 03     01/02/2011

Packaging Type: 31A

Description: Rigid, steel intermediate bulk container for liquids.

Mark number: 31A /Z/ **  ** /GB / TURNERS-5262 / 1899 / 1060

BS799 part 5 - Oil Pollution Prevention Guidelines (England & Wales) 200 - PPG2

All steel constructed road towable bowser, fitted with auto reverse brakes, Hydraulically clamped over run hitch, mud guards, mud flaps, rear and side lights, jockey wheel and interchangeable tow hitch / eye. Fitted with a mild steel rigid container (IBC) with steel portable bund, with top lifting facility. Fully removable outer lid with hinged lid providing full access to internal IBC. Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.  The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored and facilitates any distribution pumps required.

Compliancy:

Certified in accordance with Directive 2007/46/EC European Community Whole Vehicle Type Approval (ECWVTA)

EC type-approval number: e11*2007/46*0645*00

Certified to UN 1202 (for road haulage) Certificate No:  5262

Issue number and date: 03     01/02/2011

Packaging Type: 31A

Description: Rigid, steel intermediate bulk container for liquids.

Mark number: 31A /Z/ **  ** /GB / TURNERS-5262 / 1899 / 1060

BS799 part 5 - Oil Pollution Prevention Guidelines (England & Wales) 200 - PPG2

All steel constructed road towable bowser, fitted with auto reverse brakes, Hydraulically clamped over run hitch, mud guards, mud flaps, rear and side lights, jockey wheel and interchangeable tow hitch / eye. Fitted with a mild steel rigid container (IBC) with steel portable bund, with top lifting facility. Fully removable outer lid with hinged lid providing full access to internal IBC. Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.  The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored and facilitates any distribution pumps required.

Compliancy:

Certified in accordance with Directive 2007/46/EC European Community Whole Vehicle Type Approval (ECWVTA)

EC type-approval number: e11*2007/46*0645*00

Certified to UN 1202 (for road haulage) Certificate No:  5262

Issue number and date: 03     01/02/2011

Packaging Type: 31A

Description: Rigid, steel intermediate bulk container for liquids.

Mark number: 31A /Z/ **  ** /GB / TURNERS-5262 / 1899 / 1060

BS799 part 5 - Oil Pollution Prevention Guidelines (England & Wales) 200 - PPG2

All steel constructed road towable bowser, fitted with auto reverse brakes, Hydraulically clamped over run hitch, mud guards, mud flaps, rear and side lights, jockey wheel and interchangeable tow hitch / eye. Fitted with a mild steel rigid container (IBC) with steel portable bund, with top lifting facility. Fully removable outer lid with hinged lid providing full access to internal IBC. Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.  The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored and facilitates any distribution pumps required.

Compliancy:

Certified in accordance with Directive 2007/46/EC European Community Whole Vehicle Type Approval (ECWVTA)

EC type-approval number: e11*2007/46*0645*00

Certified to UN 1202 (for road haulage) Certificate No:  5262

Issue number and date: 03     01/02/2011

Packaging Type: 31A

Description: Rigid, steel intermediate bulk container for liquids.

Mark number: 31A /Z/ **  ** /GB / TURNERS-5262 / 1899 / 1060

BS799 part 5 - Oil Pollution Prevention Guidelines (England & Wales) 200 - PPG2

All steel constructed towable bowser, fitted with jockey wheel and interchangeable tow hitch / eye. Fitted with a mild steel rigid container (IBC) with steel portable bund, with top lifting facility. Fully removable outer lid with hinged lid providing full access to internal IBC. Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.  The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored and facilitates any distribution pumps required.

Compliancy: 

Certified to UN 1202 (for road haulage)

Packaging Type: 31A

Description: Rigid, steel intermediate bulk container for liquids.

BS799 part 5 - Oil Pollution Prevention Guidelines (England & Wales) 200 - PPG2

All steel constructed towable bowser, fitted with auto reverse brakes, Hydraulically clamped over run hitch, mud guards, mud flaps, rear and side lights, jockey wheel and interchangeable tow hitch / eye. Fitted with a mild steel rigid container (IBC) with steel portable bund, with top lifting facility. Fully removable outer lid with hinged lid providing full access to internal IBC. Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.  The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored and facilitates any distribution pumps required.

Compliancy:

Certified to UN 1202 (for road haulage)

Packaging Type: 31A

Description: Rigid, steel intermediate bulk container for liquids.

BS799 part 5 - Oil Pollution Prevention Guidelines (England & Wales) 200 - PPG2

All steel constructed towable bowser, fitted with auto reverse brakes, Hydraulically clamped over run hitch, mud guards, mud flaps, rear and side lights, jockey wheel and interchangeable tow hitch / eye. Fitted with a mild steel rigid container (IBC) with steel portable bund, with top lifting facility. Fully removable outer lid with hinged lid providing full access to internal IBC. Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.  The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored and facilitates any distribution pumps required.

Compliancy:

Certified to UN 1202 (for road haulage)

Packaging Type: 31A

Description: Rigid, steel intermediate bulk container for liquids.

BS799 part 5 - Oil Pollution Prevention Guidelines (England & Wales) 200 - PPG2

All steel constructed towable bowser, fitted with jockey wheel and interchangeable tow hitch / eye. Fitted with a mild steel rigid container (IBC) with steel portable bund, with top lifting facility. Fully removable outer lid with hinged lid providing full access to internal IBC. Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.  The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored and facilitates any distribution pumps required.

Compliancy: 

Certified to UN 1202 (for road haulage)

Packaging Type: 31A

Description: Rigid, steel intermediate bulk container for liquids.

BS799 part 5 - Oil Pollution Prevention Guidelines (England & Wales) 200 - PPG2

The WB is a Mild steel rigid container with a steel portable bund, fully welded with a mechanical handling base. A Hinged outer lid provides full access to an internal IBC and tank fittings. Both the inner and outer tanks are constructed from mild steel plate in compliance with BS EN 10025.

The inner tank provides the required storage area, Whilst the outer tank forms the required bund with a capacity of 110% of the total liquid being stored. These units are built to the same stringent standards as the UN approved Fuel Bank range, and capable of being lifted and transported around site when full.

This 110 Litre Wheelie Bin comes with a Hand Pump, Contents Gauge and Wheels for easy transportation.

The WB is a Mild steel rigid container with a steel portable bund, fully welded with a mechanical handling base. A Hinged outer lid provides full access to an internal IBC and tank fittings. Both the inner and outer tanks are constructed from mild steel plate in compliance with BS EN 10025.

The inner tank provides the required storage area, Whilst the outer tank forms the required bund with a capacity of 110% of the total liquid being stored. These units are built to the same stringent standards as the UN approved Fuel Bank range, and capable of being lifted and transported around site when full.

This 190 Litre Wheelie Bin comes with a Hand Pump, Contents Gauge and Wheels for easy transportation.

Manufactured in the UK from Mild Steel Plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and light oils.

Included with this Bunded Oil Tank is -

Float Type Bund Gauge

Float Type Tank Contents Gauge

2" BSP Fill Point with Cap

2" BSP Tank Vent with Cap

1" BSP Base feed with Isolation Valve

1" BSP Return Point

Top Lift points (Lift empty only)

1" BSP Spare socket into bund

10 Year Guarantee

Optional Extras -

Top Feed Outlet

Fill Point Cabinet

Overfill Valve

Electronic Tank Gauges

Selenoid Valves

Day Tank Controllers

Pump Kits

Low Level Fill Points

This self bunding, steel oil storage tank is manufactured to comply with all current regulations.
Suitable for above ground instillations at Domestic, Commercial, Agricultural and industrial locations for storage of Paraffin, Kerosene, diesel oils and light lubricant oils.

Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.

Manufactured in the UK from Mild Steel Plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and light oils.

Included with this Bunded Oil Tank is -

Float Type Bund Gauge

Float Type Tank Contents Gauge

2" BSP Fill Point with Cap

2" BSP Tank Vent with Cap

1" BSP Base feed with Isolation Valve

1" BSP Return Point

Top Lift points (Lift empty only)

1" BSP Spare socket into bund

10 Year Guarantee

Optional Extras -

Top Feed Outlet

Fill Point Cabinet

Overfill Valve

Electronic Tank Gauges

Selenoid Valves

Day Tank Controllers

Pump Kits

Low Level Fill Points

This self bunding, steel oil storage tank is manufactured to comply with all current regulations.
Suitable for above ground instillations at Domestic, Commercial, Agricultural and industrial locations for storage of Paraffin, Kerosene, diesel oils and light lubricant oils.

Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.