Generator Stores

This Generator Store has been specifically designed to house most makes of generators and associated equipment. The units have large doors providing excellent access for installation and maintenance. There is also a personnel door fitted for daily access.

The Gen-Store line are of all steel construction and benefit from a built in spillage retention sump (which eliminates the need for additional interceptor trays). It also has an integrally fitted bulk storage tank which can be permanently piped to the generator. The Gen-Store line have the option to be accoustically lined, this allows none canopied sets to be fitted.

Features - 

Full width access doors for easy access, fitted with anti jam door pins, five lever dead locks and a removable anti ram bar.

High level exhaust outlet.

Filtered air intake / outlet.

Nose deflector plates on air intakes.

Light and thermostatically controlled heat extractor fan.

Removable step (for transportation)

Built in Fork lift points

Certified Lifting eyes.

Acoustically insulated to between 70 / 90  dbA @ 1mtr subject to equipment fitted.

This Generator Store has been specifically designed to house most makes of generators and associated equipment. The units have large doors providing excellent access for installation and maintenance. There is also a personnel door fitted for daily access.

The Gen-Store line are of all steel construction and benefit from a built in spillage retention sump (which eliminates the need for additional interceptor trays). It also has an integrally fitted bulk storage tank which can be permanently piped to the generator. The Gen-Store line have the option to be accoustically lined, this allows none canopied sets to be fitted.

Features - 

Full width access doors for easy access, fitted with anti jam door pins, five lever dead locks and a removable anti ram bar.

High level exhaust outlet.

Filtered air intake / outlet.

Nose deflector plates on air intakes.

Light and thermostatically controlled heat extractor fan.

Removable step (for transportation)

Built in Fork lift points

Certified Lifting eyes.

Acoustically insulated to between 70 / 90  dbA @ 1mtr subject to equipment fitted.

Totally enclosed generator stores have been specifically designed and are capable of housing all makes of generators up to 100KVA. They offer exceptional protection against the elements and theft and offer full protection in the unlikely event of a fuel spillage eliminating the need for additional oil interceptor trays. Large access doors are fitted for easy access for maintenance.

Features - 

Front access doors: fitted with two, 5 lever dead locks (keyed alike) & two heavy duty spring bolts.

Louvered air intake: One located each side front side with filter mesh and noise deflector plates.

Louvered air outlet: One located in rear panel with filter mesh.

Exhaust outlet: Three interchangeable, high level above air outlet. One located in air outlet panel with removable cover plate.

Extractor fan: Located in the rear of the unit at a high level, fitted with thermostat.

Lifting points: Four Top lift & four low level strapping and lifting points.

Fork lift points:  W250 x H135.

Twist locks plates: Twist locks fitted in base of store for easy transportation.

Earthing boss: 10mm located either side near air intake panel.

Cable outlet: Located either side near air intake panel removable plate for access L240 x H150.

Totally enclosed generator stores have been specifically designed and are capable of housing all makes of generators up to 100KVA. They offer exceptional protection against the elements and theft and offer full protection in the unlikely event of a fuel spillage eliminating the need for additional oil interceptor trays. Large access doors are fitted for easy access for maintenance.

Features - 

Front access doors: fitted with two, 5 lever dead locks (keyed alike) & two heavy duty spring bolts.

Louvered air intake: One located each side front side with filter mesh and noise deflector plates.

Louvered air outlet: One located in rear panel with filter mesh.

Exhaust outlet: Three interchangeable, high level above air outlet. One located in air outlet panel with removable cover plate.

Extractor fan: Located in the rear of the unit at a high level, fitted with thermostat.

Lifting points: Four Top lift & four low level strapping and lifting points.

Fork lift points:  W250 x H135.

Twist locks plates: Twist locks fitted in base of store for easy transportation.

Earthing boss: 10mm located either side near air intake panel.

Cable outlet: Located either side near air intake panel removable plate for access L240 x H150.