1000 Litre Carbery Slimline Bunded Oil Tank

Diamond tanks are manufactured by Harlequin MFG and meet all regulatory requirements as well as being fully bunded.

Excellent Design - specially designed for those awkward installations, the range boasts super slimline options along with handles for easy moving and heavy duty lids on all models.

Integrally Bunded - designed to protect the surrounding environment, all tanks are bunded preventing polution if the internal tank was ever to leak.

Non Corrosive - manufactured from Medium Density Polyethylene (MDPE) your Harlequin tank will not corrode.

10 Year Guarantee (upon registration with Harlequin)

Meets Regulations - as well as being fully bunded, each tank meets all relevant regulatory requirements.

Contents Monitoring - each model has a 32mm hole suitable for fitting an electronic gauge, also available as an optional extra.

Harlequin Tanks are the leading manufacturer of plastic rotationally moulded tanks, their knowledge and expertise allow them to manufacture the highest quality plastic tanks and affordable prices.

Manufactured in Ireland from UV Stabilised Polyethylene, Titan's EcoSafe range of Bunded Oil Tanks are some of the most advanced Plastic Oil Tanks on the market. 

This Titan ES1300 Comes complete with -

Watchman Sonic Alarm

2" Overfill Prevention Valve (Factory fitted)

1" BSP Bottom Outlet (Top outlet available on request)

Bottom Outlet Kit - Isolation Valve & Filter, Thread Sealant and PTFE Tape

4" Inspection Lid

Tank Vent

Lockable Manhole Lid

10 Year warranty

Tuffa Tanks 1200 Litre fire protected heating oil tanks are manufactured in the UK from Extremely durable plastic and provide an economical solution to suit most installations. 

These Fire Resistant Tanks come complete with:

Integral 30 or 60 Minute fire Protection

2" BSP Fill point with Cap & Chain

Overfill Prevention Valve

1" BSP Bottom outlet

Float Level Gauge

Watchman Sonic Gauge

Lockable Flap Lid

Bottom Outlet Fitting Kit

Tuffa's fire-protected oil tanks come fitted with an integral bund as standard and are LABC Certified. This means they can be located within 1,800mm of a window, shed and flue outlet, or within 760mm of a non-fire rated boundary (eg. wooden fence)

Tuffa's Plastic Bunded Fire-Protected Oil Tanks must be installed to building standards.

Fire Protection

Domestic: 

30 minute fire protection – install a domestic tank adjacent to buildings and boundaries

60 minute fire protection – install a domestic tank inside an uninhabited building such as a garage (pending installer/inspector approval)

Non-Domestic:

60 minute fire protection – install a non-domestic tank adjacent to buildings and boundaries

Tuffa’s fire protected oil tanks serve as an alternative means of compliance when compared to traditional fire barriers. Tuffa’s fire protected tank system has LABC certification proving compliance with local authorities across Britain. However, it is the responsibility of the Competent Person installing the tank, or the building inspector certifying the installation, to ensure a site-specific risk assessment has been conducted.

30 minute fire protection - Enables the installation of an oil tank a minimum of 300mm from other buildings and structures. Where access is required, then a minimum distance of 600mm is required.

60 minute fire protection - Enables the installation of an oil tank within a garage or other internal space where it is impractical to install the tank externally to the building. The tank must be installed in an uninhabitable area (e.g. a garage or outbuilding), at the lowest possible level in the building or structure. Additionally, the tank must be installed a minimum of 300mm from other internal walls and structures or 600mm where access is required.

Diamond tanks are manufactured by Harlequin MFG and meet all regulatory requirements as well as being fully bunded.

Excellent Design - specially designed for those awkward installations, the range boasts super slimline options along with handles for easy moving and heavy duty lids on all models.

Integrally Bunded - designed to protect the surrounding environment, all tanks are bunded preventing polution if the internal tank was ever to leak.

Non Corrosive - manufactured from Medium Density Polyethylene (MDPE) your Harlequin tank will not corrode.

10 Year Guarantee (upon registration with Harlequin)

Meets Regulations - as well as being fully bunded, each tank meets all relevant regulatory requirements.

Contents Monitoring - each model has a 32mm hole suitable for fitting an electronic gauge, also available as an optional extra.