Steel Dispensing Tanks

The CEMO DT-Mobile Pro PE 440L with Electric pump is the perfect solution to your on site refuelling requirements. The outer bund is manufactured from 3mm Steel Plate whilst the inner is manufactured from High Quality polyethylene, this Transportable Diesel tank is approved for transport under ADR.

The CEMO DT-Mobile Pro PE 440 Comes complete with the following -

Integral Nozzle Holder

Lifting Lugs

Electronic Overfill Sensor

Integral Fork Lift Pockets

Recesses for ratchet straps during transport

40 Litre per minute 12v transfer pump with 4 metre cable

4 Metre delivery hose

Automatic Shut off Nozzle

Our Steel Bunded Diesel Dispensing Tanks are perfect for commercial fuel installations. This 450 litre capacity Steel Bunded Diesel tank is manufactured by us, in the North of England.

The TEB450 comes as standard with a secure, sumped lockable cabinet with steel doors & are manufactured from high quality mild steel plate to BS EN 10025. This Diesel Dispenser comes fitted with a 230 volt pump kit, 4 metre delivery hose, automatic shut off nozzle & a 10 micron water / particle filter though they can be customised to suit any requirement.

The outer tank holds a minimum of 110% of the inner tank to comply with all current legislation & comes with a 10 year guarantee, though if properly maintained, the TEB Diesel Tanks are built to last over 30 years.

This 450 litre Diesel Tank can be be fully bespoke built, whether it's a different inlet / outlet, higher flow pump, hose reels or even a split compartment to allow storage of other fluids like DEF within the same tank. We can also adjust the Length, Width or Height to suit your requirement. Please contact us to discuss options & get a quote.

Standard Spec -

230v - 60 litres per minute pump

4 Metre Delivery Hose

Auto Shut off Nozzle

10 Micron Cannister Water/Particle Filter

Bund & Contents Gauge

2" BSP Fill Point with Cap & Non return valve

Tank Vent Cap

Service Hatch

Corner Plinths with optional tank legs

High Security Sumped Cabinet with Lockable Steel Doors

Lifting Points

BS381C 226 - Green (Any colour available on request. Marine grade paints available)

10 Year Guarantee (life expectancy over 30 years if properly maintained)

Contact us if you would like a quote for this tank & let us know if you'd require any changes / additional items

Compliancy -

BS799 part 5

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26

Our Steel Bunded Diesel Dispensing Tanks are perfect for commercial fuel installations. This 650 litre capacity Steel Bunded Diesel tank is manufactured by us, in the North of England.

The TEB650 comes as standard with a secure, sumped lockable cabinet with steel doors & are manufactured from high quality mild steel plate to BS EN 10025. This Diesel Dispenser comes fitted with a 230 volt pump kit, 4 metre delivery hose, automatic shut off nozzle & a 10 micron water / particle filter though they can be customised to suit any requirement.

The outer tank holds a minimum of 110% of the inner tank to comply with all current legislation & comes with a 10 year guarantee, though if properly maintained, the TEB Diesel Tanks are built to last over 30 years.

This 650 litre Diesel Tank can be be fully bespoke built, whether it's a different inlet / outlet, higher flow pump, hose reels or even a split compartment to allow storage of other fluids like DEF within the same tank. We can also adjust the Length, Width or Height to suit your requirement. Please contact us to discuss options & get a quote.

Standard Spec -

230v - 60 litres per minute pump

4 Metre Delivery Hose

Auto Shut off Nozzle

10 Micron Cannister Water/Particle Filter

Bund & Contents Gauge

2" BSP Fill Point with Cap & Non return valve

Tank Vent Cap

Service Hatch

Corner Plinths with optional tank legs

High Security Sumped Cabinet with Lockable Steel Doors

Lifting Points

BS381C 226 - Green (Any colour available on request. Marine grade paints available)

10 Year Guarantee (life expectancy over 30 years if properly maintained)

Contact us if you would like a quote for this tank & let us know if you'd require any changes / additional items

Compliancy -

BS799 part 5

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26

Our Steel Bunded Diesel Dispensing Tanks are perfect for use anywhere fuel is required. This 1,250 litre capacity Steel Bunded Diesel tank is manufactured by us, in the North of England.

The TEBT1250 Bunded Diesel Tank comes as standard with a secure, sumped lockable cabinet which is fitted with a steel door. All of our tanks are manufactured from high quality mild steel plate to BS EN 10025. This Diesel Dispensing Tank can be equipped with almost any equipment required, so is suitable for almost all installations.

The outer tank holds a minimum of 110% of the inner tank to comply with all current legislation & comes with a 10 year guarantee, though if properly maintained, all of our Fuel Tanks are built to last over 30 years.

This 1,250 litre Steel Diesel Tank can be be fully bespoke built, whether it's a different inlet / outlet, higher flow pump, hose reels or even a split compartment to allow storage of other fluids like DEF within the same tank. We can also adjust the Length, Width or Height to suit your requirement. Please contact us to discuss options & get a quote.

Standard Spec -

Bund & Contents Gauge

2" BSP Fill Point with Cap & Non return valve

Tank Vent Cap

Corner Plinths with optional tank legs

High Security Sumped Cabinet with Lockable Steel Door

Lifting Points (Lift empty only)

BS381C 226 - Green (Any colour available on request. Marine grade paints available)

10 Year Guarantee (life expectancy over 30 years if properly maintained)

Contact us if you would like a quote for this tank & let us know if you'd require any changes / additional items

Compliancy -

BS799 part 5

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26

Our Steel Bunded Diesel Dispensing Tanks are perfect for commercial fuel installations. This 1,000 litre capacity Steel Bunded Diesel tank is manufactured by us, in the North of England.

The TEB1100 comes as standard with a secure, sumped lockable cabinet with steel doors & are manufactured from high quality mild steel plate to BS EN 10025. This Diesel Dispenser comes fitted with a 230 volt pump kit, 4 metre delivery hose, automatic shut off nozzle & a 10 micron water / particle filter though they can be customised to suit any requirement.

The outer tank holds a minimum of 110% of the inner tank to comply with all current legislation & comes with a 10 year guarantee, though if properly maintained, the TEB Diesel Tanks are built to last over 30 years.

This 1,100 litre Diesel Tank can be be fully bespoke built, whether it's a different inlet / outlet, higher flow pump, hose reels or even a split compartment to allow storage of other fluids like DEF within the same tank. We can also adjust the Length, Width or Height to suit your requirement. Please contact us to discuss options & get a quote.

Standard Spec -

230v - 60 litres per minute pump

4 Metre Delivery Hose

Auto Shut off Nozzle

10 Micron Cannister Water/Particle Filter

Bund & Contents Gauge

2" BSP Fill Point with Cap & Non return valve

Tank Vent Cap

Service Hatch

Corner Plinths with optional tank legs

High Security Sumped Cabinet with Lockable Steel Doors

Lifting Points

BS381C 226 - Green (Any colour available on request. Marine grade paints available)

10 Year Guarantee (life expectancy over 30 years if properly maintained)

Contact us if you would like a quote for this tank & let us know if you'd require any changes / additional items

Compliancy -

BS799 part 5

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26

Our Steel Bunded Diesel Dispensing Tanks are perfect for use anywhere fuel is required. This 1,600 litre capacity Steel Bunded Diesel tank is manufactured by us, in the North of England.

The TEBT1650 Bunded Diesel Tank comes as standard with a secure, sumped lockable cabinet which is fitted with a steel door. All of our tanks are manufactured from high quality mild steel plate to BS EN 10025. This Diesel Dispensing Tank can be equipped with almost any equipment required, so is suitable for almost all installations.

The outer tank holds a minimum of 110% of the inner tank to comply with all current legislation & comes with a 10 year guarantee, though if properly maintained, all of our Fuel Tanks are built to last over 30 years.

This 1,650 litre Steel Diesel Tank can be be fully bespoke built, whether it's a different inlet / outlet, higher flow pump, hose reels or even a split compartment to allow storage of other fluids like DEF within the same tank. We can also adjust the Length, Width or Height to suit your requirement. Please contact us to discuss options & get a quote.

Standard Spec -

Bund & Contents Gauge

2" BSP Fill Point with Cap & Non return valve

Tank Vent Cap

Corner Plinths with optional tank legs

High Security Sumped Cabinet with Lockable Steel Doors

Lifting Points (Lift empty only)

BS381C 226 - Green (Any colour available on request. Marine grade paints available)

10 Year Guarantee (life expectancy over 30 years if properly maintained)

Contact us if you would like a quote for this tank & let us know if you'd require any changes / additional items

Compliancy -

BS799 part 5

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26

Our Steel Bunded Diesel Dispensing Tanks are perfect for use anywhere fuel is required. This 2,000 litre capacity Steel Bunded Diesel tank is manufactured by us, in the North of England.

The TEBT2000 Bunded Diesel Tank comes as standard with a secure, sumped lockable cabinet which is fitted with a steel door. All of our tanks are manufactured from high quality mild steel plate to BS EN 10025. This Diesel Dispensing Tank can be equipped with almost any equipment required, so is suitable for almost all installations.

The outer tank holds a minimum of 110% of the inner tank to comply with all current legislation & comes with a 10 year guarantee, though if properly maintained, all of our Fuel Tanks are built to last over 30 years.

This 2,000 litre Steel Diesel Tank can be be fully bespoke built, whether it's a different inlet / outlet, higher flow pump, hose reels or even a split compartment to allow storage of other fluids like DEF within the same tank. We can also adjust the Length, Width or Height to suit your requirement. Please contact us to discuss options & get a quote.

Standard Spec -

Bund & Contents Gauge

2" BSP Fill Point with Cap & Non return valve

Tank Vent Cap

Corner Plinths with optional tank legs

High Security Sumped Cabinet with Lockable Steel Doors

Lifting Points (Lift empty only)

BS381C 226 - Green (Any colour available on request. Marine grade paints available)

10 Year Guarantee (life expectancy over 30 years if properly maintained)

Contact us if you would like a quote for this tank & let us know if you'd require any changes / additional items

Compliancy -

BS799 part 5

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26

Our Steel Bunded Diesel Dispensing Tanks are perfect for use anywhere fuel is required. This 2,500 litre capacity Steel Bunded Diesel tank is manufactured by us, in the North of England.

The TEBT2500 Bunded Diesel Tank comes as standard with a secure, sumped lockable cabinet which is fitted with a steel door. All of our tanks are manufactured from high quality mild steel plate to BS EN 10025. This Diesel Dispensing Tank can be equipped with almost any equipment required, so is suitable for almost all installations.

The outer tank holds a minimum of 110% of the inner tank to comply with all current legislation & comes with a 10 year guarantee, though if properly maintained, all of our Fuel Tanks are built to last over 30 years.

This 2,500 litre Steel Diesel Tank can be be fully bespoke built, whether it's a different inlet / outlet, higher flow pump, hose reels or even a split compartment to allow storage of other fluids like DEF within the same tank. We can also adjust the Length, Width or Height to suit your requirement. Please contact us to discuss options & get a quote.

Standard Spec -

Bund & Contents Gauge

2" BSP Fill Point with Cap & Non return valve

Tank Vent Cap

Corner Plinths with optional tank legs

High Security Sumped Cabinet with Lockable Steel Doors

Lifting Points (Lift empty only)

BS381C 226 - Green (Any colour available on request. Marine grade paints available)

10 Year Guarantee (life expectancy over 30 years if properly maintained)

Contact us if you would like a quote for this tank & let us know if you'd require any changes / additional items

Compliancy -

BS799 part 5

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26

Our Steel Bunded Diesel Dispensing Tanks are perfect for commercial fuel installations. This 1,250 litre capacity Steel Bunded Diesel tank is manufactured by us, in the North of England.

The TEB1250 comes as standard with a secure, sumped lockable cabinet with steel doors & are manufactured from high quality mild steel plate to BS EN 10025. This Diesel Dispenser comes fitted with a 230 volt pump kit, 4 metre delivery hose, automatic shut off nozzle & a 10 micron water / particle filter though they can be customised to suit any requirement.

The outer tank holds a minimum of 110% of the inner tank to comply with all current legislation & comes with a 10 year guarantee, though if properly maintained, the TEB Diesel Tanks are built to last over 30 years.

This 1,250 litre Diesel Tank can be be fully bespoke built, whether it's a different inlet / outlet, higher flow pump, hose reels or even a split compartment to allow storage of other fluids like DEF within the same tank. We can also adjust the Length, Width or Height to suit your requirement. Please contact us to discuss options & get a quote.

Standard Spec -

230v - 60 litres per minute pump

4 Metre Delivery Hose

Auto Shut off Nozzle

10 Micron Cannister Water/Particle Filter

Bund & Contents Gauge

2" BSP Fill Point with Cap & Non return valve

Tank Vent Cap

Service Hatch

Corner Plinths with optional tank legs

High Security Sumped Cabinet with Lockable Steel Doors

Lifting Points

BS381C 226 - Green (Any colour available on request. Marine grade paints available)

10 Year Guarantee (life expectancy over 30 years if properly maintained)

Contact us if you would like a quote for this tank & let us know if you'd require any changes / additional items

Compliancy -

BS799 part 5

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26

Our Steel Bunded Diesel Dispensing Tanks are perfect for commercial fuel installations. This 1,600 litre capacity Steel Bunded Diesel tank is manufactured by us, in the North of England.

The TEB1650 comes as standard with a secure, sumped lockable cabinet with steel doors & are manufactured from high quality mild steel plate to BS EN 10025. This Diesel Dispenser comes fitted with a 230 volt pump kit, 4 metre delivery hose, automatic shut off nozzle & a 10 micron water / particle filter though they can be customised to suit any requirement.

The outer tank holds a minimum of 110% of the inner tank to comply with all current legislation & comes with a 10 year guarantee, though if properly maintained, the TEB Diesel Tanks are built to last over 30 years.

This 1,600 litre Diesel Tank can be be fully bespoke built, whether it's a different inlet / outlet, higher flow pump, hose reels or even a split compartment to allow storage of other fluids like DEF within the same tank. We can also adjust the Length, Width or Height to suit your requirement. Please contact us to discuss options & get a quote.

Standard Spec -

230v - 60 litres per minute pump

4 Metre Delivery Hose

Auto Shut off Nozzle

10 Micron Cannister Water/Particle Filter

Bund & Contents Gauge

2" BSP Fill Point with Cap & Non return valve

Tank Vent Cap

Service Hatch

Corner Plinths with optional tank legs

High Security Sumped Cabinet with Lockable Steel Doors

Lifting Points

BS381C 226 - Green (Any colour available on request. Marine grade paints available)

10 Year Guarantee (life expectancy over 30 years if properly maintained)

Contact us if you would like a quote for this tank & let us know if you'd require any changes / additional items

Compliancy -

BS799 part 5

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26

Our Steel Bunded Diesel Dispensing Tanks are perfect for use anywhere fuel is required. This 3,350 litre capacity Steel Bunded Diesel tank is manufactured by us, in the North of England.

The TEBT3350 Bunded Diesel Tank comes as standard with a secure, sumped lockable cabinet which is fitted with a steel door. All of our tanks are manufactured from high quality mild steel plate to BS EN 10025. This Diesel Dispensing Tank can be equipped with almost any equipment required, so is suitable for almost all installations.

The outer tank holds a minimum of 110% of the inner tank to comply with all current legislation & comes with a 10 year guarantee, though if properly maintained, all of our Fuel Tanks are built to last over 30 years.

This 3,350 litre Steel Diesel Tank can be be fully bespoke built, whether it's a different inlet / outlet, higher flow pump, hose reels or even a split compartment to allow storage of other fluids like DEF within the same tank. We can also adjust the Length, Width or Height to suit your requirement. Please contact us to discuss options & get a quote.

Standard Spec -

Bund & Contents Gauge

2" BSP Fill Point with Cap & Non return valve

Tank Vent Cap

Corner Plinths with optional tank legs

High Security Sumped Cabinet with Lockable Steel Doors

Lifting Points (Lift empty only)

BS381C 226 - Green (Any colour available on request. Marine grade paints available)

10 Year Guarantee (life expectancy over 30 years if properly maintained)

Contact us if you would like a quote for this tank & let us know if you'd require any changes / additional items

Compliancy -

BS799 part 5

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26

Our Steel Bunded Diesel Dispensing Tanks are perfect for commercial fuel installations. This 2,000 litre capacity Steel Bunded Diesel tank is manufactured by us, in the North of England.

The TEB2000 comes as standard with a secure, sumped lockable cabinet with steel doors & are manufactured from high quality mild steel plate to BS EN 10025. This Diesel Dispenser comes fitted with a 230 volt pump kit, 4 metre delivery hose, automatic shut off nozzle & a 10 micron water / particle filter though they can be customised to suit any requirement.

The outer tank holds a minimum of 110% of the inner tank to comply with all current legislation & comes with a 10 year guarantee, though if properly maintained, the TEB Diesel Tanks are built to last over 30 years.

This 2,000 litre Diesel Tank can be be fully bespoke built, whether it's a different inlet / outlet, higher flow pump, hose reels or even a split compartment to allow storage of other fluids like DEF within the same tank. We can also adjust the Length, Width or Height to suit your requirement. Please contact us to discuss options & get a quote.

Standard Spec -

230v - 60 litres per minute pump

4 Metre Delivery Hose

Auto Shut off Nozzle

10 Micron Cannister Water/Particle Filter

Bund & Contents Gauge

2" BSP Fill Point with Cap & Non return valve

Tank Vent Cap

Service Hatch

Corner Plinths with optional tank legs

High Security Sumped Cabinet with Lockable Steel Doors

Lifting Points

BS381C 226 - Green (Any colour available on request. Marine grade paints available)

10 Year Guarantee (life expectancy over 30 years if properly maintained)

Contact us if you would like a quote for this tank & let us know if you'd require any changes / additional items

Compliancy -

BS799 part 5

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26