x Items in my bag 0
    Menu
    Menux
    Our office will be closed from 5th - 9th August for our summer shutdown.
    Emails will be monitored but our phone lines will be unavailable. Orders will be dispatched where possible.

    Diesel Filters & Conditioners

    Refine By
    quick view
    Advanced Fuel Conditioning Recirculation Pump
    D
    HVO

    Advanced Fuel Conditioning Recirculation Pump

    Availability - Please ask
    Price £2,600.00 £3,120.00 inc VAT

    This Fuel Conditioner is suitable for tanks storing up to 40,000 litres of Diesel / HVO. A microbial growth called diesel bug forms when Diesel fuel isn't used, or is stored for long periods of time. This is caused by water in the fuel. The advanced fuel conditioner prevents this from happening by keeping the diesel free of contaminants which would otherwise cause damage to machinery and vehicles.

    The fuel conditioner is engineered to obtain a target multi-pass ISO 14/13/11 level, with laboratory tests showing water content removal to under 60ppm. The unit comes with a Piusi Panther pump, two Cim-Tek Ultimate Defence particle and water filters, and a magnetic fuel conditioner to break up diesel bug sludge that forms when water enters and contaminates the diesel fuel.

    The biggest benefit of this fuel conditioner over alternatives is it's operational intelligence to help prevent any downtime in fuel conditioning. There is a custom micro controller with a touch screen display for clear visual warnings of fuel filter degradation and blocks, the time until the next run cycle, an event and alarm log, and flow trends for filter life expectancy, allowing pre-emptive replacements of filters. The fuel conditioner has an input for a fuel tank alarm or gauge and leak detection probe to detect a low fuel level and leak, where if activated, the fuel pump will turn off until the issue is resolved, as well as two passive BMS outputs for remote warning of fuel filter block and low level/leak to alert the user that they need to take action.

    The system run times are automatically set based upon the fuel tank size and run between 9am-5pm, Mon to Fri to ensure conditioning of 1.5 x the tank capacity per month. However this is customisable depending upon customer requirements.

    read more...
    quick view
    GoldenRod 496-5 Water/Particle Filter Element - 12 Pack
    D
    P
    HVO
    B2

    GoldenRod 496-5 Water/Particle Filter Element - 12 Pack

    Availability - Please ask
    Price £250.00 £300.00 inc VAT

    The GoldenRod 496-5 Fuel Filter Element is the replacement, 17 micron paper cartridge for the GoldenRod 496 water block fuel filter. You should change your GoldenRod filter element when you notice the flow rate of your system dropping, as this indicates the fuel tank filter is getting full.

    We would recommend using the GoldenRod filter wrench when changing the paper element to limit the risk of cracking of the bowl whilst trying to screw it off with force, and ensure it is screwed back on tight enough to prevent leaks.

    read more...
    quick view
    Piusi CFD 150-30 Water/Particle Filter Element
    D
    P
    HVO

    Piusi CFD 150-30 Water/Particle Filter Element

    Availability - Please ask
    Price £82.00 £98.40 inc VAT

    The Piusi CFD 150-30 Water Captor Fuel Tank Filter can be fitted to both the suction and delivery side of the system, ensuring that the diesel that is transferred is free of particles and water. Due to it having a maximum flow rate of 150lpm, this fuel storage tank filter is popular amongst high flow pumping systems. This diesel filter is installed simply by spinning on the cartridge, making replacing the filter an easy task.

    read more...
    quick view
    Piusi CFD 70-30 Water/Particle Filter
    D
    P
    HVO

    Piusi CFD 70-30 Water/Particle Filter

    Availability - Please ask
    Price £100.00 £120.00 inc VAT

    The Piusi CFD 70-30 Water Captor Fuel Tank Filter removes both water and particles out of diesel to a micron rating of 30. This diesel storage tank filter can be installed before or after the pump, and has a spin on cartridge, which makes it easy to be replaced when it starts to get full.

    read more...
    quick view
    Aquafighter Snake Fuel Tank Water Absorber
    D
    O
    HVO
    B1

    Aquafighter Snake Fuel Tank Water Absorber

    Availability - Please ask
    Price £78.00 £93.60 inc VAT

    The Aquafighter Snake is a fuel tank water absorber designed to remove both free and suspended/emulsified water from fuel tanks of industrial machines, boats, and fuel storage tanks with small openings such as generator belly tanks.

    The increase of bio content in fuel means that there is a rising issue associated with water contamination and microbial growth, which is responsible for a nasty sludge that blocks filters, damages equipment, corrodes engines and causes poor fuel efficiency. The Aquafighter water absorber eliminates these problems by reducing the water content levels down to 75ppm to meet the EN590 diesel fuel standards (200ppm), saving you costly damage and downtime. The diesel tank water absorber not only absorbs free water like other solutions on the market but also separates and captures the suspended and emulsified water in the fuel, which often gets left to cause serious damage to your vehicles and equipment. 

    By working in this way, the Aquafighter Snake fuel tank water absorber provides numerous benefits including preventing diesel bug from forming, reducing filter replacement and need for tank cleaning and protecting the tank from corrosion. 

    Please note: If this is your first time using Aquafighter, we recommend buying 2 units. The first can be added to absorb the current water, which may become full quickly if there is a large problem with water. The second to be added once the other has been removed to act as a prevention against future water content.

    read more...
    quick view
    Aquafighter Anaconda Fuel Tank Water Absorber
    D
    O
    HVO
    B1

    Aquafighter Anaconda Fuel Tank Water Absorber

    Availability - Please ask
    Price £128.00 £153.60 inc VAT

    Aquafighter Anaconda is a fuel tank water absorber designed to remove both free and suspended/emulsified water from fuel tanks to provide a complete solution for water contamination. This particular diesel and oil tank water absorber is typically installed through 3.5 inches/9 cm openings on bulk storage tanks with the option to install multiple absorbers on even bigger tanks if they can be removed individually.

    As bio content in fuel is increasing, water content and the microbial growth that results from is are becoming serious issues for stored fuel quality. This is often responsible for creating a nasty sludge that blocks filters, damages your equipment, causes engine system corrosion and poor fuel efficiency. The Aquafighter water absorber eliminates these problems by reducing the water content levels down to 75ppm to meet the EN590 diesel fuel standards (200ppm) and saving you costly damage and downtime. The diesel tank water absorber not only removes free water like other solutions on the market but also separates and captures the suspended and emulsified water, which often gets left to cause serious damage to your vehicles and equipment. 

    By working in this way, the Aquafighter Anaconda fuel tank water absorber provides numerous benefits including preventing diesel bug from forming, reducing filter replacement requirements and need for tank cleaning and protecting the tank from corrosion.

    Please note: If this is your first time using Aquafighter, we recommend buying 2 units. The first can be added to absorb the current water, which may become full quickly if there is a large problem with water. The second to be added once the other has been removed to act as a prevention against future water content.

    read more...
    quick view
    Aquafighter Medium Canvas Fuel Tank Water Absorber
    D
    O
    HVO
    B1

    Aquafighter Medium Canvas Fuel Tank Water Absorber

    Availability - Please ask
    Price £73.50 £88.20 inc VAT

    Aquafighter Large Canvas is a fuel tank water absorber designed to remove both free and suspended/emulsified water out of diesel fuel directly in the tank, therefore providing a complete solution for water contamination. Aquafighter Canvas comes in two sizes, Medium and Large, depending on the size of the fuel storage tank. The diesel and oil tank water absorber is typically used for removing water from bulk fuel storage tanks and generator tanks.

    The medium size is suitable for a tank with a capacity of up to 5,000 litres with the access of at least 12cm and the large size for a capacity of up to 10,000 litres with the access of at least 16cm. Both sizes of the fuel tank water absorber can be manipulated through tank opening but not through a long pipe.

    The bound and free water in a storage tank can cause issues associated with microbial growth, known as "diesel bugs", which is responsible for creating a nasty sludge that blocks filters, damages your equipment, causes engine system corrosion and poor fuel efficiency. The Aquafighter water absorber eliminates these problems by reducing the water content levels down to 75ppm to meet the EN590 diesel fuel standards (200ppm) and saving you costly damage and downtime. Unlike other solutions on the market, this diesel tank water absorber not only removes free water but also separates and captures the suspended and emulsified water, which often gets left to cause serious damage to your vehicles and equipment. 

    By doing this, the Aquafighter Canvas fuel tank water absorber provides numerous benefits including preventing diesel bug from forming, reducing filter replacements and need for tank cleaning and protecting the tank from corrosion. 

    Please note: If this is your first time using Aquafighter, we recommend buying 2 units. The first can be added to absorb the current water, which may become full quickly if there is a large problem with water. The second to be added once the other has been removed to act as a prevention against future water content.

    read more...
    quick view
    Aquafighter Finger Fuel Tank Water Absorber
    D
    O
    HVO
    B1

    Aquafighter Finger Fuel Tank Water Absorber

    Availability - Please ask
    Price £42.20 £50.64 inc VAT

    The Aquafighter Finger is a fuel tank water absorber designed to remove both the free and suspended/emulsified water from fuel tanks onboard small industrial machines, agricultural machinery and plant equipment when they are not in use. 

    With the increasing bio content in diesel, water contamination is one of the largest causes of engine damage, as it causes microbial growth that results in a nasty sludge responsible for filter blockages, equipment damage, engine corrosion and poor fuel efficiency. The Aquafighter water absorber eliminates these problems by reducing the water content levels down to 75ppm to meet the EN590 diesel fuel standards (200ppm), saving you costly damage and downtime. Unlike other solutions on the market, this diesel tank water absorber not only absorbs free water but separates and captures the suspended emulsified water in the fuel, which often gets left to cause serious damage to your vehicles and equipment. 

    By acting in this way, the Aquafighter Finger fuel tank water absorber provides numerous benefits including preventing diesel bug from forming, reducing filter replacement requirements and the need for a regular tank cleaning, and protecting the tank from corrosion. 

    Please note: If this is your first time using Aquafighter, we recommend buying 2 units. The first can be added to absorb the current water, which may become full quickly if there is a large problem with water. The second to be added once the other has been removed to act as a prevention against future water content.

    read more...
    quick view
    Aquafighter Large Canvas Fuel Tank Water Absorber
    D
    O
    HVO
    B1

    Aquafighter Large Canvas Fuel Tank Water Absorber

    Availability - Please ask
    Price £115.00 £138.00 inc VAT

    Aquafighter Large Canvas is a fuel tank water absorber designed to remove both free and suspended/emulsified water out of diesel fuel directly in the tank, therefore providing a complete solution for water contamination. Aquafighter Canvas comes in two sizes, Medium and Large, depending on the size of the fuel storage tank. The diesel and oil tank water absorber is typically used for removing water from bulk fuel storage tanks and generator tanks.

    The medium size is suitable for a tank with a capacity of up to 5,000 litres with the access of at least 12cm and the large size for a capacity of up to 10,000 litres with the access of at least 16cm. Both sizes of the fuel tank water absorber can be manipulated through tank opening but not through a long pipe.

    The bound and free water in a storage tank can cause issues associated with microbial growth, known as "diesel bugs", which is responsible for creating a nasty sludge that blocks filters, damages your equipment, causes engine system corrosion and poor fuel efficiency. The Aquafighter water absorber eliminates these problems by reducing the water content levels down to 75ppm to meet the EN590 diesel fuel standards (200ppm) and saving you costly damage and downtime. Unlike other solutions on the market, this diesel tank water absorber not only removes free water but also separates and captures the suspended and emulsified water, which often gets left to cause serious damage to your vehicles and equipment. 

    By doing this, the Aquafighter Canvas fuel tank water absorber provides numerous benefits including preventing diesel bug from forming, reducing filter replacements and need for tank cleaning and protecting the tank from corrosion. 

    Please note: If this is your first time using Aquafighter, we recommend buying 2 units. The first can be added to absorb the current water, which may become full quickly if there is a large problem with water. The second to be added once the other has been removed to act as a prevention against future water content.

    read more...
    quick view
    Piusi Vantage Quick Lock Foot Valve c/w Strainer
    D
    O
    HVO

    Piusi Vantage Quick Lock Foot Valve c/w Strainer

    Availability In stock
    Price £35.00 £42.00 inc VAT
    Thread Size

    The Piusi Vantage Quick Locking Foot Valve and Strainer has been specifically designed for the safe and easy transfer of diesel from drums and tanks into plant machinery. This non return valve has an environmentally friendly, quick locking feature that locks the valve seat into position to stop the leakage of diesel during heavy handed operation.

    read more...
    quick view
    Brass Foot Valve c/w Strainer
    D
    K
    O
    W
    HVO

    Brass Foot Valve c/w Strainer

    Availability - Please ask
    Price £11.20 £13.44 inc VAT

    The Brass Foot Valve and Strainer ensures that the fuel being drawn up by the pump is free from any large particles that could damage the pumping system.

    read more...
    quick view
    Tiger Loop Bio De-Aerator
    D
    K
    HVO
    B1

    Tiger Loop Bio De-Aerator

    Availability - Please ask
    Price £110.00 £132.00 inc VAT

    The TigerLoop® Bio De-aerator can remove gas/air bubbles out of kerosene, gas oil and biofuel up to B100. By doing this, the TigerLoop oil de-aerator helps to prevent problems experienced by the pump and nozzle that result from air in the fuel system. The TigerLoop® de-aerator for bio is also constructed of metal materials and comes with a connection to safely remove vapours via a tube, allowing it to be suitable for use in and outdoors.

    read more...

    TOP
    CLOSE X
    Thank you for subscribing to our newsletter