Waste Oil Accessories

The MT Profil Fuel Tank Float Gauge from Afriso is a small mechanical clock gauge for measuring the tank's contents by a float that sits on the fuel and goes up and down with the level. Whilst also popular for diesel storage tanks, it is most commonly used as a domestic heating oil tank gauge. The small display shows a scale of Empty 1⁄4, 1⁄2, 3⁄4 and Full for factory calibrated versions, allowing the user to quickly identify the approximate fuel tank level.

This oil tank level gauge is available in different versions depending upon the specific height of the fuel tank, or there is an 8'0 adjustable version. The 8'0 adjustable version of the MT Profil oil tank float gauge displays the level reading in cm, and has a reversible display which goes to 150cm max on one side, and 250cm max on the other.

These oil tank gauges are supplied as standard with 1 1⁄2” BSP Male for easy fitting on the top of the storage tank or drum. If your tank has a 2" BSP hole, you can fit this gauge by purchasing a 2" x 1 1/2" reducing bush. If your tank has a vent hole, you can connect the gauge by fitting a 2" barrel nipple into the hole and adding a combi vent cap which has a 1 1/2" BSP thread to screw in the gauge to prevent an additional hole being drilled.

The Waste Oil Drainers from Gartec SAMOA are designed for the draining and containment of waste oil from cars and motorcycles in a workshop. This is a very practical waste oil bucket that can easily be placed behind the vehicle oil sump. Its 8 l capacity is enough for 2 oil changes in a small car.

This Brass Check Valve is a spring loaded valve for use in pipe systems where flow is required in one direction and no return flow is allowed. These check valves can be installed in any orientation and are fitted with Female BSP threads.

The Piusi Steel Hose Tail is male hose barb with NBR seals. These hose tails can be used with hoses that have either a 19mm or 25mm inner diameter. 

The Brass Inline Y Strainer is designed to protect pumping system components by filtering large debris particles. The body and cap of this inline fuel filter is constructed of brass, and has a removable 550 micron stainless steel strainer. These y strainers also have a brass drain point for the easy removal of the contaminants filtered out of the diesel or oil.

The Piusi Depuroil is a mobile filtration unit for de-contaminating oils by removing debris and particles from the fluid. This oil filtration system comes in the form of a sturdy trolley unit with wheels enabling the unit to be easily transported. It has an integrated particle filter cannister and a pressure gauge to warn of a filter blockage and that the cannister needs to be replaced (one replacement cannister is supplied. As well as a Viscomat pump, it comes with a suction hose and strainer, delivery hose with a dispensing tube. and a support holder for the suction hose and dispensing valve allowing neat and compact storage.

The Piusi Depuroil fuel conditioner is commonly used for cleaning out waste oil tanks as well as filtering used machinery oil and vehicle oil so that it can be recycled and reused.

The Piusi Drum Trolleys are part of Piusi’s new range of products for the lubrication market, however these drum trolleys can be used for drums containing any liquid including grease and oil.

These sturdy drum trollies are for the easy manoeuvring of a drum around a garage or workshop, and come equipped with a holster for supporting the dispensing hose. There are different models available, which have either 2 or 4 wheels, and the size of the trolley depends upon the size of the drum you are using.

The Piusi Filtroll is a portable filtration unit, which provides double filtering of diesel or oil by absorbing any water or particle impurities that are in the fuel using a two stage filtration process. The Filtroll benefits from a sturdy trolley with large diameter wheels for transportation across uneven ground, with an incorporated drip tray to prevent mess and environmental damage.

There are alternative options available of the Piusi Filtroll filtration unit depending upon whether an oil or a diesel fuel filter is required. As well as a Panther pump, the diesel version of the Piusi fuel conditioning unit comes with 4m suction hose with locking Vantage foot valve and strainer to stop fuel from leaking out when the system is no longer in use. It also comes with 4m delivery hose, hose holder for compact and neat storage and a Self 3000 manual nozzle and support. The oil version on the other hand comes with a Viscomat pump and a 1" dispensing tube rather than nozzle.

The Filtroll fuel filtration unit has two primary applications; firstly it can be used to extract fuel from a container and filter it before directly dispensing it into the vehicle. Secondly, it can be used during tank service to extract the fuel, filter it and then recirculate it back into the original container. 

The Nylon Basket Strainer is designed to be attached to suction lines or non return valves, in order to protect pumping system components by filtering large debris particles. These basket strainers have a high quality nylon body with precise moulded threads.

The Brass Foot Valve and Strainer ensures that the fuel being drawn up by the pump is free from any large particles that could damage the pumping system.

The Piusi Vantage Quick Locking Foot Valve and Strainer has been specifically designed for the safe and easy transfer of diesel from drums and tanks into plant machinery. This non return valve has an environmentally friendly, quick locking feature that locks the valve seat into position to stop the leakage of diesel during heavy handed operation.

This single tank level alarm probe is designed for use with the CTS tank alarms to alert of a high or low level on tanks containing fluids with a high viscosity or containing debris. The primary use of this level switch is for use on waste oil tank alarms for containing oils that need recycling or disposing of in garage and workshop applications, as due to being encapsulated reliable cut off is ensured even with the presence of particles. The supplied weight can be attached to the cable at any desired length to adjust the switching height in high and bund applications.