Diesel Flow Meters & Gauges

The MT Profil Fuel Tank Float Gauge from Afriso is a small mechanical clock gauge for measuring the tank's contents by a float that sits on the fuel and goes up and down with the level. Whilst also popular for diesel storage tanks, it is most commonly used as a domestic heating oil tank gauge. The small display shows a scale of Empty 1⁄4, 1⁄2, 3⁄4 and Full for factory calibrated versions, allowing the user to quickly identify the approximate fuel tank level.

This oil tank level gauge is available in different versions depending upon the specific height of the fuel tank, or there is an 8'0 adjustable version. The 8'0 adjustable version of the MT Profil oil tank float gauge displays the level reading in cm, and has a reversible display which goes to 150cm max on one side, and 250cm max on the other.

These oil tank gauges are supplied as standard with 1 1⁄2” BSP Male for easy fitting on the top of the storage tank or drum. If your tank has a 2" BSP hole, you can fit this gauge by purchasing a 2" x 1 1/2" reducing bush. If your tank has a vent hole, you can connect the gauge by fitting a 2" barrel nipple into the hole and adding a combi vent cap which has a 1 1/2" BSP thread to screw in the gauge to prevent an additional hole being drilled.

The Push Button Oil Tank Sight Gauge is a traditional, economical model of heating oil tank gauge, primarily installed on domestic tanks. It works via a simple push to read button, which when pressed, the oil tank level indicator provides the user with an immediate visual indication of the tank’s contents.

This oil tank level gauge is constructed of a quality, corrosion resistant zinc plated brass and is suitable for use on both steel and plastic bottom outlet fuel tanks. A user friendly benefit of this fuel tank gauge is that it remains isolated when the button is released.

The MTF 2000 Fuel Tank Float Gauge from Afriso is a cost effective, mechanical clock gauge that determines the a fuel tank's contents by a float that sits on the fuel and goes up and down with the level. Whilst also commonly used on diesel storage tanks, it is most popular as a domestic oil tank gauge, providing a full scale reading displayed as a percentage.

Whilst still a cost effective gauging solution, the MTF 2000 has a range of benefits over it's sister model the the MT Profil oil tank level gauge. Firstly, thanks to being fully adjustable between tank heights of 900mm and 2000mm, only one model needs to be stocked to cover a range of tank sizes. It also benefits from brass and nickel internal components that enhance its service life. These heating oil tank gauges are also very adaptable as they can fit both 2” and 1 1⁄2” BSP female threads on a tank.

The Gem Oil Tank Sight Gauge is a traditional, cost effective type of heating oil tank gauge generally used in domestic properties. It is a simple pull to read oil tank level indicator that gives an instant measurement of the tank’s contents, that benefits from an integrated paper filter with alloy bowl for easy removing and cleaning. This oil tank level gauge has an incorporated isolation valve to that it can be serviced or replaced without having the drain the entire tank of fuel.

Designed to fit the bottom outlet of both steel and plastic tanks, and complete with a multi-directional outlet so that it can feed up to two boilers, the Gem fuel tank gauge is suitable for a range of applications.

The Apollo Oil Tank Gauge is an easy to retrofit ultrasonic level indicator generally used as a domestic oil tank gauge.

The Apollo is made up of a transmitter that is installed at the tank, and a digital receiver that can be plugged inside the building to conveniently display the tank level without the user having to remember to go outside to check.

This oil tank level indicator measures the tank’s contents and transmits the level to the receiver, provided that is within its 200 metre range. The standard version of this oil tank level monitor is suitable for plastic tanks only. However, an adaptor can be purchased as an accessory to make it work on steel tanks.

The Apollo Oil Tank Gauge is an easy to retrofit ultrasonic level indicator generally used as a domestic oil tank gauge.

The Apollo is made up of a transmitter that is installed at the tank, and a digital receiver that can be plugged inside the building to conveniently display the tank level without the user having to remember to go outside to check.

This oil tank level indicator measures the tank’s contents and transmits the level to the receiver, provided that is within its 200 metre range. The standard version of this oil tank level monitor is suitable for plastic tanks only. However, an adaptor can be purchased as an accessory to make it work on steel tanks.

The Apollo Visual heating oil tank gauge version also read levels at the tank locally, which is not available on the standard Apollo gauge. This allows fuel delivery drivers to visually check the oil in the tank gives a visual indication when the tank is nearing its maximum capacity.

The Piusi K400 Fuel Pulse Meter makes use of an oval gear system to measure the quantity dispensed of diesel, lubrication oil, anti-freeze and windscreen wash liquid, at a maximum flow rate of 30lpm. These Piusi diesel pulse meters have no reading of it, and are instead used in conjunction with displays that allow the dispensing data to be read elsewhere. The K400 fuel flow meter with pulse output is ideal as an accompaniment to a dispensing nozzle, and for fixed systems for transferring lubricants. 

The Unitel Hydrostatic Fuel Tank Gauge from Afriso Euroindex is a pneumatic tank level indicator designed for use primarily on fuel oil and diesel tanks, but also used as an AdBlue tank gauge. It has a spring loaded plunger that you pull and release until the needle settles on the contents left within the storage tank, which is then displayed clearly as a percentage on its large mechanical face.

This fuel tank level gauge is suitable for horizontal, vertical, cylindrical and rectangular tanks, with heights between 900mm and 3000mm for diesel and up to 2500mm for Water/AdBlue , making the Unitel a highly popular and versatile tank level indicator.

The Unitel fuel tank gauge also benefits from a handy adjustable second needle for setting a level parameter, which you can then use to indicate the level at which you need to reorder fuel. Supplied in an impact resistant casing, the Euroindex contents gauge can be easily wall or tank mounted.

The Piusi K90 Fuel Flow Meter is a nutating disk mechanical meter with a large mechanical display to make it easier to see the quantity of fuel that has been dispensed. Unlike other flow meters the Piusi K90 has a 90 degree inlet and outlet which can't be rotated, please view the image and choose the orientation which suits you best.

The K90 mechanical flow meter is a patented design by Piusi and is one of the most accurate mechanical flow meters at +/- 0.6% accuracy.

Please note: This flow meter does not have threaded ports and flanges are required to connect to other equipment (Sold separately)

The K33 is a mechanical flow meters suitable for the monitoring of diesel, It has a partial indicator with 3 digits (max. 999 Litres), with a total of 6 digits.

PRECISION AND QUALITY

The K33 mechanical diesel flow meter have been designed for precise measurement of the quantity of fuels dispensed for non-commercial use. Easy to calibrate and install, the K33 flow meter can monitor the quantity dispensed for a maximum flow rate of 20-120 l/min and with a maximum working pressure of the pump of 10 bar. In addition, it can guarantee a burst pressure of 30 bar with a metering accuracy of +/- 1%.

RELIABILITY

The K33 mechanical flow meter for diesel is easy to calibrate at the place of installation and is suitable for installation on pumps or service stations for diesel, for those who want to keep the amount of dispensed fluid monitored without special needs for storage.

It is reliable and an economic mechanical flow meter that can also be used by gravity, thanks to the low resistance to flow.

The SAMOA Mechanical Nutating Disk Flow Meter is suitable for high-accuracy monitoring of diesel & Comes fitted with a 3 digit resettable totaliser (99.9L Max) & a 6 Digit non resettable totaliser. This Mechanical Flow Meter from SAMOA is suitable for gravity fed applications with a minimum flow of 20 litres per minute & has a very low pressure drop.

The meter allows to orientate the inlet and outlet in four different positions.

Maximum working pressure: 10 bar

Flow range: 20 to 100 litre/min

Precision after calibration: +/- 1%

The K24 Turbine Fuel Pulse Meter is a digital turbine pulse meter, designed for measuring the transfer of diesel and flammable liquids such as petrol.

This K24 digitial pulse meter has an aluminium body making it very sturdy and durable, and is also bi-directional allowing the flow to be counted either way. These fuel flow meters with pulse output have no electronic display as they are used to interface consumption information with external management systems, or indicators allowing the information to be read and stored elsewhere. The K24 turbine pulse meter can be used in flammable environments, and is also for use with a non commercial fuel delivery pump either part of, or externally inline.