Heating Oil Tank Deals

This 650-litre capacity slimline environment-friendly bunded oil tank is suitable for the storage of heating oil in a domestic or commercial set up. It’s ideal for use when space is at a premium and additional tank technology is not a requirement.

Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing. Moulded in handles allow for the tank to be transported quite easily.

The Harlequin 650HQI comes complete with -

Integrally bunded

Bottom outlet with 1" BSP(F) thread

16" lockable access lid

4" lockable inspection cap

2" fill point

32mm hole with cover for electronic gauge

10 Year Guarantee

This 650-litre capacity slimline environment-friendly bunded oil tank is suitable for the storage of heating oil in a domestic or commercial set up where space is at a premium. Equipped with a range of fittings, including an ultrasonic contents gauge and bottom outlet fitting kit this bottom outlet tank provides a complete solution for a fully compliant installation.

Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing.

Integrally bunded

Bottom outlet with 1" BSP(F) thread

16" lockable access lid

4" lockable inspection cap

2" fill point

32mm hole with cover for electronic gauge

Ultrasonic contents gauge

Bottom outlet fitting kit

LRC overfill prevention probe

Inner tank vent

Our range of DLC Steel Bunded Heating Oil Tanks are dual purpose, all steel tanks that has been designed specifically for domestic and light commercial users. The DLC range can easily be upgraded to become a fuel dispensing tank by simply adding a cabinet and pump, you can order this by searching for 'DLCC'.

This 1,000 litre Steel Bunded Oil Tank is manufactured in 3 parts to enable easy disassembly and reassembly on site, allowing these tanks to be installed in even the most hard to reach places.

The DLC range of Bunded Oil Tanks can be supplied with steel base supports, this eliminates direct contact with the ground. Steel section supports are available to run length or width ways to allow them to be positioned to match existing tank bases. Alternatively, they can be supplied with a variety of Steel Tank Stands which are perfectly suited to gravity feed applications.

These Bunded Steel Oil Tanks have a dual purpose fill/vent which can be used to view the tank's contents. The tank vents directly to the tank bund and then to the atmosphere removing the risk of spills occurring when filling the tank.

Northern Tank Stores DLC Range of Bunded Oil Tanks come with a 1” bottom outlet and lockable isolation valve. There is a 1½” BSP and a 2” BSP socket located underneath the lockable tank hatch, this allows additional items such as gauges & alarms to be fitted. The lockable lid keeps the tank contents safe and secure.

Compliance:

Control of pollution (oil storage) (England) regulations 2001, PPG2, PPG26 and BS799 pt5.

Diamond tanks are manufactured by Harlequin MFG and meet all regulatory requirements as well as being fully bunded.

Excellent Design - specially designed for those awkward installations, the range boasts super slimline options along with handles for easy moving and heavy duty lids on all models.

Integrally Bunded - designed to protect the surrounding environment, all tanks are bunded preventing polution if the internal tank was ever to leak.

Non Corrosive - manufactured from Medium Density Polyethylene (MDPE) your Harlequin tank will not corrode.

10 Year Guarantee (upon registration with Harlequin)

Meets Regulations - as well as being fully bunded, each tank meets all relevant regulatory requirements.

Contents Monitoring - each model has a 32mm hole sutiable for fitting an electronic gauge, also available as an optional extra.

Our range of DLC Steel Bunded Heating Oil Tanks are dual purpose, all steel tanks that has been designed specifically for domestic and light commercial users. The DLC range can easily be upgraded to become a fuel dispensing tank by simply adding a cabinet and pump, you can order this by searching for 'DLCC'.

This 1,400 litre Steel Bunded Oil Tank is manufactured in 3 parts to enable easy disassembly and reassembly on site, allowing these tanks to be installed in even the most hard to reach places.

The DLC range of Bunded Oil Tanks can be supplied with steel base supports, this eliminates direct contact with the ground. Steel section supports are available to run length or width ways to allow them to be positioned to match existing tank bases. Alternatively, they can be supplied with a variety of Steel Tank Stands which are perfectly suited to gravity feed applications.

These Bunded Steel Oil Tanks have a dual purpose fill/vent which can be used to view the tank's contents. The tank vents directly to the tank bund and then to the atmosphere removing the risk of spills occurring when filling the tank.

Northern Tank Stores DLC Range of Bunded Oil Tanks come with a 1” bottom outlet and lockable isolation valve. There is a 1½” BSP and a 2” BSP socket located underneath the lockable tank hatch, this allows additional items such as gauges & alarms to be fitted. The lockable lid keeps the tank contents safe and secure.

Compliance:

Control of pollution (oil storage) (England) regulations 2001, PPG2, PPG26 and BS799 pt5.

This 1300-litre capacity slimline environment-friendly bunded oil tank is suitable for the storage of heating oil in a domestic or commercial set up. It’s ideal for use when space is at a premium and additional tank technology is not a requirement.

Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing. Moulded in handles allow for the tank to be transported quite easily.

The Harlequin 1300HQI Comes complete with -

Integrally bunded

Bottom outlet with 1" BSP(F) thread

16" lockable access lid

4" lockable inspection cap

2" fill point

32mm hole with cover for electronic gauge

Inner tank vent

10 year guarantee