Hose Fittings

The Mikalor Supra W2 Hose Clamps are heavy duty hose clips for the most demanding of hose assemblies. They benefit from a swivelling bridge which allows the clamp to be mounted in awkward applications without having to remove the hose.

Mikalor clips can also be opened and fastened in place without dislodging other parts, and have bevelled edges to protect the hose from damage. These hose clips are popular for industrial, automotive and agricultural machinery hoses.

The Brass BSPT Hose Tail is available in a range of different thread sizes. These hose tails can also be used on hoses with inner diameters from 12mm up to 50mm, making them a versatile fitting.

The Hi-Grip Stainless Steel Hose Clamps are designed for hoses with 25mm to 35mm OD, meaning that only one version needs to be stocked for a range of hose sizes.

These hose clips are made entirely of 18/8 marine quality stainless steel making them suitable for salt water and other highly corrosive applications. They are Lloyd’s Register approved for marine, offshore and industrial use.

The Piusi Polypropylene Hose Tail is a 90° degree hose tail for hose connections of 19mm. It is ideal for use with AdBlue™, and has been designed for use with the Piusi SEC IBC Connectors.

This Piusi Brass Hose Tail is a heavy pattern type, male hose barb that is supplied with an NBR sealing ‘O’ ring. These brass hose tails are suitable for use on hoses with a 25mm inner diameter.

The Piusi Steel Hose Tail is male hose barb with NBR seals. These hose tails can be used with hoses that have either a 19mm or 25mm inner diameter. 

The Aluminium Hose Tail is a light duty, male hose barb that has a brass colour finish. These hose tails are available for hoses with an 1”/25mm inner diameter.

The Stainless Steel Hose Tail is a heavy duty pattern, and is designed for use with more aggressive fluids such as AdBlue™. These hose tails can be connected to hoses that have inner diameters from 19mm up to 50mm. There is an option for this hose barb to come with a swivel connection.

Smaller sizes available on request.

The Plastic Hose Tail is available in two alternative versions. It can be supplied as a standard Male or Female BSP hose barb, or as a 90° version, which can also be Male or Female. These Piusi plastic hose tails are designed to be used during transfer of AdBlue™, and are suitable for hoses with a 19mm inner diameter.

These drum fittings are thread converters, used to convert a specific drum thread to an industry standard 2” BSP thread, enabling the direct connection of a pump or tap. These thread converters have very precise moulded threads and raised notches, which allow the easy tightening by hand. These drum adaptors are constructed from polypropylene and are available in two versions - Mauser & TRI-SURE®.

This Female 60 x 6 DN61 IBC fitting is designed to connect to the bottom outlet of an IBC to convert a buttress thread to a Male BSP thread, and therefore enables the easy connection of dispensing equipment. With a polypropylene construction, these Male BSP fittings are available for use with AdBlue, Diesel, Oil, Water and Chemicals and comes in either of 1" M BSP or 2" M BSP versions.

This Female 60 x 6 DN61 IBC fitting fits to the bottom outlet of an IBC in order to convert a buttress thread to a Male CAM fitting, enabling the easy connection of dispensing equipment. Available in 1" M CAM or 2" M CAM, it's constructed from polypropylene making it compatible with AdBlue, Diesel, Oil, Water and Chemical.