Fire Rated Oil Tanks

Tuffa Tanks 2440 Litre fire protected heating oil tanks are manufactured in the UK from Extremely durable plastic and provide an economical solution to suit most installations. 

These Fire Resistant Tanks come complete with:

Integral 30 or 60 Minute fire Protection

2" BSP Fill point with Cap & Chain

Overfill Prevention Valve

1" BSP Bottom outlet

Float Level Gauge

Watchman Sonic Gauge

Lockable Flap Lid

Bottom Outlet Fitting Kit

Tuffa's fire-protected oil tanks come fitted with an integral bund as standard and are LABC Certified. This means they can be located within 1,800mm of a window, shed and flue outlet, or within 760mm of a non-fire rated boundary (eg. wooden fence)

Tuffa's Plastic Bunded Fire-Protected Oil Tanks must be installed to building standards.

Fire Protection

Domestic: 

30 minute fire protection – install a domestic tank adjacent to buildings and boundaries

60 minute fire protection – install a domestic tank inside an uninhabited building such as a garage (pending installer/inspector approval)

Non-Domestic:

60 minute fire protection – install a non-domestic tank adjacent to buildings and boundaries

Tuffa’s fire protected oil tanks serve as an alternative means of compliance when compared to traditional fire barriers. Tuffa’s fire protected tank system has LABC certification proving compliance with local authorities across Britain. However, it is the responsibility of the Competent Person installing the tank, or the building inspector certifying the installation, to ensure a site-specific risk assessment has been conducted.

30 minute fire protection - Enables the installation of an oil tank a minimum of 300mm from other buildings and structures. Where access is required, then a minimum distance of 600mm is required.

60 minute fire protection - Enables the installation of an oil tank within a garage or other internal space where it is impractical to install the tank externally to the building. The tank must be installed in an uninhabitable area (e.g. a garage or outbuilding), at the lowest possible level in the building or structure. Additionally, the tank must be installed a minimum of 300mm from other internal walls and structures or 600mm where access is required.

Tuffa Tanks 1200 Litre fire protected heating oil tanks are manufactured in the UK from Extremely durable plastic and provide an economical solution to suit most installations. 

These Fire Resistant Tanks come complete with:

Integral 30 or 60 Minute fire Protection

2" BSP Fill point with Cap & Chain

Overfill Prevention Valve

1" BSP Bottom outlet

Float Level Gauge

Watchman Sonic Gauge

Lockable Flap Lid

Bottom Outlet Fitting Kit

Tuffa's fire-protected oil tanks come fitted with an integral bund as standard and are LABC Certified. This means they can be located within 1,800mm of a window, shed and flue outlet, or within 760mm of a non-fire rated boundary (eg. wooden fence)

Tuffa's Plastic Bunded Fire-Protected Oil Tanks must be installed to building standards.

Fire Protection

Domestic: 

30 minute fire protection – install a domestic tank adjacent to buildings and boundaries

60 minute fire protection – install a domestic tank inside an uninhabited building such as a garage (pending installer/inspector approval)

Non-Domestic:

60 minute fire protection – install a non-domestic tank adjacent to buildings and boundaries

Tuffa’s fire protected oil tanks serve as an alternative means of compliance when compared to traditional fire barriers. Tuffa’s fire protected tank system has LABC certification proving compliance with local authorities across Britain. However, it is the responsibility of the Competent Person installing the tank, or the building inspector certifying the installation, to ensure a site-specific risk assessment has been conducted.

30 minute fire protection - Enables the installation of an oil tank a minimum of 300mm from other buildings and structures. Where access is required, then a minimum distance of 600mm is required.

60 minute fire protection - Enables the installation of an oil tank within a garage or other internal space where it is impractical to install the tank externally to the building. The tank must be installed in an uninhabitable area (e.g. a garage or outbuilding), at the lowest possible level in the building or structure. Additionally, the tank must be installed a minimum of 300mm from other internal walls and structures or 600mm where access is required.

Tuffa Tanks 1150 Litre fire protected heating oil tanks are manufactured in the UK from Extremely durable plastic and provide an economical solution to suit most installations. 

These Fire Resistant Tanks come complete with:

Integral 30 or 60 Minute fire Protection

2" BSP Fill point with Cap & Chain

Overfill Prevention Valve

1" BSP Bottom outlet

Float Level Gauge

Watchman Sonic Gauge

Lockable Flap Lid

Bottom Outlet Fitting Kit

Tuffa's fire-protected oil tanks come fitted with an integral bund as standard and are LABC Certified. This means they can be located within 1,800mm of a window, shed and flue outlet, or within 760mm of a non-fire rated boundary (eg. wooden fence)

Tuffa's Plastic Bunded Fire-Protected Oil Tanks must be installed to building standards.

Fire Protection

Domestic: 

30 minute fire protection – install a domestic tank adjacent to buildings and boundaries

60 minute fire protection – install a domestic tank inside an uninhabited building such as a garage (pending installer/inspector approval)

Non-Domestic:

60 minute fire protection – install a non-domestic tank adjacent to buildings and boundaries

Tuffa’s fire protected oil tanks serve as an alternative means of compliance when compared to traditional fire barriers. Tuffa’s fire protected tank system has LABC certification proving compliance with local authorities across Britain. However, it is the responsibility of the Competent Person installing the tank, or the building inspector certifying the installation, to ensure a site-specific risk assessment has been conducted.

30 minute fire protection - Enables the installation of an oil tank a minimum of 300mm from other buildings and structures. Where access is required, then a minimum distance of 600mm is required.

60 minute fire protection - Enables the installation of an oil tank within a garage or other internal space where it is impractical to install the tank externally to the building. The tank must be installed in an uninhabitable area (e.g. a garage or outbuilding), at the lowest possible level in the building or structure. Additionally, the tank must be installed a minimum of 300mm from other internal walls and structures or 600mm where access is required.

Tuffa Tanks 2,300 Litre fire protected heating oil tanks are manufactured in the UK from 3mm Mild steel. With a life expectancy of 30 years, they provide an economical solution to suit most installations. 

These Tanks come complete with:

Integral 30 or 60 Minute fire Protection

2" BSP Fill point with Cap & Chain

Overfill Prevention Valve

1" BSP Bottom outlet

Float Level Clock Gauge

Watchman Sonic Gauge

Central Lifting Eye

Channel Runners

Bottom Outlet Fitting Kit

Green RAL6005 Paint finish

Tuffa's fire-protected oil tanks come fitted with an integral bund as standard and are LABC Certified. This means they can be located within 1,800mm of a window, shed and flue outlet, or within 760mm of a non-fire rated boundary (eg. wooden fence)

Tuffa's Steel Bunded Fire-Protected Oil Tanks must be installed to building standards.

Fire Protection

Domestic: 

30 minute fire protection – install a domestic tank adjacent to buildings and boundaries

60 minute fire protection – install a domestic tank inside an uninhabited building such as a garage (pending installer/inspector approval)

Non-Domestic:

60 minute fire protection – install a non-domestic tank adjacent to buildings and boundaries

Tuffa’s fire protected oil tanks serve as an alternative means of compliance when compared to traditional fire barriers. Tuffa’s fire protected tank system has LABC certification proving compliance with local authorities across Britain. However, it is the responsibility of the Competent Person installing the tank, or the building inspector certifying the installation, to ensure a site-specific risk assessment has been conducted.

30 minute fire protection - Enables the installation of an oil tank a minimum of 300mm from other buildings and structures. Where access is required, then a minimum distance of 600mm is required.

60 minute fire protection - Enables the installation of an oil tank within a garage or other internal space where it is impractical to install the tank externally to the building. The tank must be installed in an uninhabitable area (e.g. a garage or outbuilding), at the lowest possible level in the building or structure. Additionally, the tank must be installed a minimum of 300mm from other internal walls and structures or 600mm where access is required.

Tuffa Tanks 1,800 Litre fire protected heating oil tanks are manufactured in the UK from 3mm Mild steel. With a life expectancy of 30 years, they provide an economical solution to suit most installations. 

These Tanks come complete with:

Integral 30 or 60 Minute fire Protection

2" BSP Fill point with Cap & Chain

Overfill Prevention Valve

1" BSP Bottom outlet

Float Level Clock Gauge

Watchman Sonic Gauge

Central Lifting Eye

Channel Runners

Bottom Outlet Fitting Kit

Green RAL6005 Paint finish

Tuffa's fire-protected oil tanks come fitted with an integral bund as standard and are LABC Certified. This means they can be located within 1,800mm of a window, shed and flue outlet, or within 760mm of a non-fire rated boundary (eg. wooden fence)

Tuffa's Steel Bunded Fire-Protected Oil Tanks must be installed to building standards.

Fire Protection

Domestic: 

30 minute fire protection – install a domestic tank adjacent to buildings and boundaries

60 minute fire protection – install a domestic tank inside an uninhabited building such as a garage (pending installer/inspector approval)

Non-Domestic:

60 minute fire protection – install a non-domestic tank adjacent to buildings and boundaries

Tuffa’s fire protected oil tanks serve as an alternative means of compliance when compared to traditional fire barriers. Tuffa’s fire protected tank system has LABC certification proving compliance with local authorities across Britain. However, it is the responsibility of the Competent Person installing the tank, or the building inspector certifying the installation, to ensure a site-specific risk assessment has been conducted.

30 minute fire protection - Enables the installation of an oil tank a minimum of 300mm from other buildings and structures. Where access is required, then a minimum distance of 600mm is required.

60 minute fire protection - Enables the installation of an oil tank within a garage or other internal space where it is impractical to install the tank externally to the building. The tank must be installed in an uninhabitable area (e.g. a garage or outbuilding), at the lowest possible level in the building or structure. Additionally, the tank must be installed a minimum of 300mm from other internal walls and structures or 600mm where access is required.

Tuffa Tanks 1,100 Litre fire protected heating oil tanks are manufactured in the UK from 3mm Mild steel. With a life expectancy of 30 years, they provide an economical solution to suit most installations. 

These Tanks come complete with:

Integral 30 or 60 Minute fire Protection

2" BSP Fill point with Cap & Chain

Overfill Prevention Valve

1" BSP Bottom outlet

Float Level Clock Gauge

Watchman Sonic Gauge

Central Lifting Eye

Channel Runners

Bottom Outlet Fitting Kit

Green RAL6005 Paint finish

Tuffa's fire-protected oil tanks come fitted with an integral bund as standard and are LABC Certified. This means they can be located within 1,800mm of a window, shed and flue outlet, or within 760mm of a non-fire rated boundary (eg. wooden fence)

Tuffa's Steel Bunded Fire-Protected Oil Tanks must be installed to building standards.

Fire Protection

Domestic: 

30 minute fire protection – install a domestic tank adjacent to buildings and boundaries

60 minute fire protection – install a domestic tank inside an uninhabited building such as a garage (pending installer/inspector approval)

Non-Domestic:

60 minute fire protection – install a non-domestic tank adjacent to buildings and boundaries

Tuffa’s fire protected oil tanks serve as an alternative means of compliance when compared to traditional fire barriers. Tuffa’s fire protected tank system has LABC certification proving compliance with local authorities across Britain. However, it is the responsibility of the Competent Person installing the tank, or the building inspector certifying the installation, to ensure a site-specific risk assessment has been conducted.

30 minute fire protection - Enables the installation of an oil tank a minimum of 300mm from other buildings and structures. Where access is required, then a minimum distance of 600mm is required.

60 minute fire protection - Enables the installation of an oil tank within a garage or other internal space where it is impractical to install the tank externally to the building. The tank must be installed in an uninhabitable area (e.g. a garage or outbuilding), at the lowest possible level in the building or structure. Additionally, the tank must be installed a minimum of 300mm from other internal walls and structures or 600mm where access is required.

Tuffa Tanks 900 Litre fire protected heating oil tanks are manufactured in the UK from 3mm Mild steel. With a life expectancy of 30 years, they provide an economical solution to suit most installations. 

These Tanks come complete with:

Integral 30 or 60 Minute fire Protection

2" BSP Fill point with Cap & Chain

Overfill Prevention Valve

1" BSP Bottom outlet

Float Level Clock Gauge

Watchman Sonic Gauge

Central Lifting Eye

Channel Runners

Bottom Outlet Fitting Kit

Green RAL6005 Paint finish

Tuffa's fire-protected oil tanks come fitted with an integral bund as standard and are LABC Certified. This means they can be located within 1,800mm of a window, shed and flue outlet, or within 760mm of a non-fire rated boundary (eg. wooden fence)

Tuffa's Steel Bunded Fire-Protected Oil Tanks must be installed to building standards.

Fire Protection

Domestic: 

30 minute fire protection – install a domestic tank adjacent to buildings and boundaries

60 minute fire protection – install a domestic tank inside an uninhabited building such as a garage (pending installer/inspector approval)

Non-Domestic:

60 minute fire protection – install a non-domestic tank adjacent to buildings and boundaries

Tuffa’s fire protected oil tanks serve as an alternative means of compliance when compared to traditional fire barriers. Tuffa’s fire protected tank system has LABC certification proving compliance with local authorities across Britain. However, it is the responsibility of the Competent Person installing the tank, or the building inspector certifying the installation, to ensure a site-specific risk assessment has been conducted.

30 minute fire protection - Enables the installation of an oil tank a minimum of 300mm from other buildings and structures. Where access is required, then a minimum distance of 600mm is required.

60 minute fire protection - Enables the installation of an oil tank within a garage or other internal space where it is impractical to install the tank externally to the building. The tank must be installed in an uninhabitable area (e.g. a garage or outbuilding), at the lowest possible level in the building or structure. Additionally, the tank must be installed a minimum of 300mm from other internal walls and structures or 600mm where access is required.