Manufactured in the UK from Mild Steel Plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and light oils.

Included with this Bunded Oil Tank is -

Float Type Bund Gauge

Hydrostatic Tank Contents Gauge

3" BSP Fill Point with Cap

3" BSP Tank Vent with Cap

1" BSP Top feed

Top Lift points (Lift empty only)

1" BSP Spare socket into bund

Overfill Prevention Valve

10 Year Guarantee

This self bunding, steel oil storage tank is manufactured to comply with all current regulations.
Suitable for above ground instillations at Domestic, Commercial, Agricultural and industrial locations for storage of Paraffin, Kerosene, diesel oils and light lubricant oils.

Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.

Our Steel Bunded Diesel Dispensing Tanks are perfect for commercial fuel installations. This 150,000 litre capacity Steel Bunded Diesel tank is manufactured by us, in the North of England.

The TEB152800R comes as standard with a secure, lockable roller shutter door & are manufactured from high quality mild steel plate to BS EN 10025. This Diesel Dispenser comes fitted with a 230 volt pump kit, 4 metre delivery hose, automatic shut off nozzle, 10 micron water / particle filter & a mechanical overfill prevention valve, though they can be customised to suit any requirement.

The outer tank holds a minimum of 110% of the inner tank to comply with all current legislation & comes with a 10 year guarantee, though if properly maintained, the TEB Diesel Tanks are built to last over 30 years.

This 150,000 litre Diesel Tank can be be fully bespoke built, whether it's a different inlet / outlet, higher flow pump, hose reels or even a split compartment to allow storage of other fluids like DEF within the same tank. We can also adjust the Length, Width or Height to suit your requirement. Please contact us to discuss options & get a quote.

Standard Spec -

230v - 72 litres per minute pump

4 Metre Delivery Hose

Auto Shut off Nozzle

Overfill Prevention Valve

10 Micron Cannister Water/Particle Filter

Bund Gauge

Hydrostatic Contents Gauge

3" BSP Fill Point with Cap & Non return valve

3" Tank Vent & Cap

Service Hatch

Base Plinths

High Security Sumped Cabinet with Lockable Aluminium Roller Shutter Door

Lifting Points

BS381C 226 - Green (Any colour available on request. Marine grade paints available)

10 Year Guarantee (life expectancy over 30 years if properly maintained)

Contact us if you would like a quote for this tank & let us know if you'd require any changes / additional items

Compliancy -

BS799 part 5

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26

This 86,000 Litre Steel Bunded Diesel Dispensing Tank by Tuffa Tanks is manufactured in the UK from hard-wearing 6mm Mild steel, and backed by a 10 year guarantee. The life expectancy for this tank is over 30 years when properly installed & maintained.

Tuffa's 86000SBFS comes complete with - 

230v External Pump

6 Metre Delivery Hose

Automatic Shut off Nozzle

K33 Flow Meter

Nozzle Holster

3" BSP Fill Point with Cap & Chain

Overfill Prevention gauge

Tank Vent

C2020 Contents Gauge & Bund Alarm (230v)

10 Micron Water/Particle Filter

High security cabinet with roller shutter door

Channel Runners

Lifting eyes

Grey RAL 7001 Paint finish

10 Year Guarantee

The options for this tank include - 

K44 pulsed outlet flowmeter – allows connection to a separate fuel management system (10:1 pulses per litre).

Hose reel – a self-retracting hose reel with 8m delivery hose.

Pump options – Higher flow rate pumps available.

Fuel management system – a Piusi fuel management system fitted within the lockable cabinet that allows authorised users to dispense the fuel from the tank via a pin code or a magnetic key system. The software provided means the system can also be connected to a PC for viewing the transaction data enabling better tracking and real-time information. Cloud systems available.

No dispensing equipment – suitable for diesel generators or sites with existing dispensing equipment.

Our Steel Bunded Diesel Dispensing Tanks are perfect for commercial fuel installations. This 120,000 litre capacity Steel Bunded Diesel tank is manufactured by us, in the North of England.

The TEB120550R comes as standard with a secure, lockable roller shutter door & are manufactured from high quality mild steel plate to BS EN 10025. This Diesel Dispenser comes fitted with a 230 volt pump kit, 4 metre delivery hose, automatic shut off nozzle, 10 micron water / particle filter & a mechanical overfill prevention valve, though they can be customised to suit any requirement.

The outer tank holds a minimum of 110% of the inner tank to comply with all current legislation & comes with a 10 year guarantee, though if properly maintained, the TEB Diesel Tanks are built to last over 30 years.

This 120,000 litre Diesel Tank can be be fully bespoke built, whether it's a different inlet / outlet, higher flow pump, hose reels or even a split compartment to allow storage of other fluids like DEF within the same tank. We can also adjust the Length, Width or Height to suit your requirement. Please contact us to discuss options & get a quote.

Standard Spec -

230v - 72 litres per minute pump

4 Metre Delivery Hose

Auto Shut off Nozzle

Overfill Prevention Valve

10 Micron Cannister Water/Particle Filter

Bund Gauge

Hydrostatic Contents Gauge

3" BSP Fill Point with Cap & Non return valve

3" Tank Vent & Cap

Service Hatch

Base Plinths

High Security Sumped Cabinet with Lockable Aluminium Roller Shutter Door

Lifting Points

BS381C 226 - Green (Any colour available on request. Marine grade paints available)

10 Year Guarantee (life expectancy over 30 years if properly maintained)

Contact us if you would like a quote for this tank & let us know if you'd require any changes / additional items

Compliancy -

BS799 part 5

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26

Mild steel rigid bunded container with steel portable bund fully welded with mechanical handling base and top lifting facility.  Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.

The unit is manufactured with an integrally bunded tank with capacity to hold an additional 10% of the total liquid being stored which is then fitted within a steel outer bund providing a secondary bund to the main storage tank. A bulk head is fitted in front of the storage tank to provide an area in which all the tanks control and dispensing equipment is housed.  A steel roller shutter door is provided for increased security

These units are built to the same stringent standards as the UN approved Fuel Bank range, and capable of being lifted and transported around site when full.

Compliancy:

BS799 part 5,

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26

Manufactured in the UK from Mild Steel Plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and light oils.

Included with this Bunded Oil Tank is -

Float Type Bund Gauge

Hydrostatic Tank Contents Gauge

3" BSP Fill Point with Cap

3" BSP Tank Vent with Cap

1" BSP Top feed

Top Lift points (Lift empty only)

1" BSP Spare socket into bund

Overfill Prevention Valve

10 Year Guarantee

This self bunding, steel oil storage tank is manufactured to comply with all current regulations.
Suitable for above ground instillations at Domestic, Commercial, Agricultural and industrial locations for storage of Paraffin, Kerosene, diesel oils and light lubricant oils.

Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.

Manufactured in the UK from Mild Steel Plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and light oils.

Included with this Bunded Oil Tank is -

Float Type Bund Gauge

Hydrostatic Tank Contents Gauge

3" BSP Fill Point with Cap

3" BSP Tank Vent with Cap

1" BSP Top feed

Top Lift points (Lift empty only)

1" BSP Spare socket into bund

Overfill Prevention Valve

10 Year Guarantee

This self bunding, steel oil storage tank is manufactured to comply with all current regulations.
Suitable for above ground instillations at Domestic, Commercial, Agricultural and industrial locations for storage of Paraffin, Kerosene, diesel oils and light lubricant oils.

Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.

Our Steel Bunded Diesel Dispensing Tanks are perfect for commercial fuel installations. This 100,000 litre capacity Steel Bunded Diesel tank is manufactured by us, in the North of England.

The TEB101850R comes as standard with a secure, lockable roller shutter door & are manufactured from high quality mild steel plate to BS EN 10025. This Diesel Dispenser comes fitted with a 230 volt pump kit, 4 metre delivery hose, automatic shut off nozzle, 10 micron water / particle filter & a mechanical overfill prevention valve, though they can be customised to suit any requirement.

The outer tank holds a minimum of 110% of the inner tank to comply with all current legislation & comes with a 10 year guarantee, though if properly maintained, the TEB Diesel Tanks are built to last over 30 years.

This 100,000 litre Diesel Tank can be be fully bespoke built, whether it's a different inlet / outlet, higher flow pump, hose reels or even a split compartment to allow storage of other fluids like DEF within the same tank. We can also adjust the Length, Width or Height to suit your requirement. Please contact us to discuss options & get a quote.

Standard Spec -

230v - 72 litres per minute pump

4 Metre Delivery Hose

Auto Shut off Nozzle

Overfill Prevention Valve

10 Micron Cannister Water/Particle Filter

Bund Gauge

Hydrostatic Contents Gauge

3" BSP Fill Point with Cap & Non return valve

3" Tank Vent & Cap

Service Hatch

Base Plinths

High Security Sumped Cabinet with Lockable Aluminium Roller Shutter Door

Lifting Points

BS381C 226 - Green (Any colour available on request. Marine grade paints available)

10 Year Guarantee (life expectancy over 30 years if properly maintained)

Contact us if you would like a quote for this tank & let us know if you'd require any changes / additional items

Compliancy -

BS799 part 5

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26

Our Steel Bunded Diesel Dispensing Tanks are perfect for commercial fuel installations. This 90,000 litre capacity Steel Bunded Diesel tank is manufactured by us, in the North of England.

The TEB90800R comes as standard with a secure, lockable roller shutter door & are manufactured from high quality mild steel plate to BS EN 10025. This Diesel Dispenser comes fitted with a 230 volt pump kit, 4 metre delivery hose, automatic shut off nozzle, 10 micron water / particle filter & a mechanical overfill prevention valve, though they can be customised to suit any requirement.

The outer tank holds a minimum of 110% of the inner tank to comply with all current legislation & comes with a 10 year guarantee, though if properly maintained, the TEB Diesel Tanks are built to last over 30 years.

This 90,000 litre Diesel Tank can be be fully bespoke built, whether it's a different inlet / outlet, higher flow pump, hose reels or even a split compartment to allow storage of other fluids like DEF within the same tank. We can also adjust the Length, Width or Height to suit your requirement. Please contact us to discuss options & get a quote.

Standard Spec -

230v - 72 litres per minute pump

4 Metre Delivery Hose

Auto Shut off Nozzle

Overfill Prevention Valve

10 Micron Cannister Water/Particle Filter

Bund Gauge

Hydrostatic Contents Gauge

3" BSP Fill Point with Cap & Non return valve

3" Tank Vent & Cap

Service Hatch

Base Plinths

High Security Sumped Cabinet with Lockable Aluminium Roller Shutter Door

Lifting Points

BS381C 226 - Green (Any colour available on request. Marine grade paints available)

10 Year Guarantee (life expectancy over 30 years if properly maintained)

Contact us if you would like a quote for this tank & let us know if you'd require any changes / additional items

Compliancy -

BS799 part 5

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26

This Horizontal, cylindrical bulk diesel tank with a double skin design is constructed from mild steel plate to BS EN 10025.

The inner tank provides the required storage area, whilst the outer tank forms the required bund with capacity of 110% of the total liquid being stored. The tank vent is piped into the bund and then to the atmosphere further reducing the risk of spills in the event of overfilling the tank.

These tanks are fitted with steel base supports to eliminate ground contact with the tank base.

This Cylindrical fuel tank can be supplied with either a lockable fill point cabinet or full size inset cabinet to house any ancillary equipment fitted with lockable steel or roller shutter door.

Specification:

1 x 2” tank to bund vent.   1 x 2” atmospheric vent with cap.   1 x Bund contents test and drain point with dial gauge. 1 x 2” Base feed with isolation valve.   1 x 2” Top feed with foot valve and strainer.   1 x 2” socket for tank contents. 1 x 2” Socket fill point.   4 x lift points (lift empty only).   1 x 1” socket in bund for optional bund alarm probe.

1 x 2” socket in top of tank for optional high / low alarm probes.     1 x 600mm Service hatch.     Base support: Tank support cradles with ground anchor points.

Paint finish: ISO 12944 C3 Compliant coating. Application design life: 7 years. Typical environments include: Urban and industrial atmospheres, Moderate sulphur dioxide levels, production areas with humidity.

Compliancy:

BS799 Part 5. PPG2, DSEAR 2002

Control of Pollution (Oil Storage) (England) Regulations,

Environment (Oil Storage) (Scotland) Regulations,

Control of Pollution (Oil Storage) Regulations (Northern Ireland),

Control of Pollution (Oil Storage) (Wales) Regulations.

Mild steel rigid bunded container with steel portable bund fully welded with mechanical handling base and top lifting facility.  Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.

The unit is manufactured with an integrally bunded tank with capacity to hold an additional 10% of the total liquid being stored which is then fitted within a steel outer bund providing a secondary bund to the main storage tank. A bulk head is fitted in front of the storage tank to provide an area in which all the tanks control and dispensing equipment is housed.  A steel roller shutter door is provided for increased security

These units are built to the same stringent standards as the UN approved Fuel Bank range, and capable of being lifted and transported around site when full.

Compliancy:

BS799 part 5,

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26

Manufactured in the UK from Mild Steel Plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and light oils.

Included with this Bunded Oil Tank is -

Float Type Bund Gauge

Hydrostatic Tank Contents Gauge

3" BSP Fill Point with Cap

3" BSP Tank Vent with Cap

1" BSP Top feed

Top Lift points (Lift empty only)

1" BSP Spare socket into bund

Overfill Prevention Valve

10 Year Guarantee

This self bunding, steel oil storage tank is manufactured to comply with all current regulations.
Suitable for above ground instillations at Domestic, Commercial, Agricultural and industrial locations for storage of Paraffin, Kerosene, diesel oils and light lubricant oils.

Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.