500 & 650 Litre Bunded Oil Tanks

The 650 litre bunded heating oil tank from Carbery is an ideal choice for small domestic installations thanks its slim profile, relatively low weight and nearly 650 litre capacity.

All Carbery bunded tanks come backed by a 10 year warranty and free delivery (exclusions apply, please see below)

This tank is EN13341 Compliant, OFCERT approved and manufactured to ISO Standards.

Supplied with -

• 2” lockable oil tank fill point
• 5” lockable oil tank inspection point
• 2” fuel tank vent
• Lockable access lid
• 32mm electronic gauge point
• Contents Dipstick
• 1” BSP bottom outlet

Free delivery on Carbery Tanks includes delivery within mainland UK, but excludes the following postcodes - AB, BT, DD, DG, EH, FK, G, HS, IM, IV, KA, KW, KY, ML, PA, PH, TD, TR and ZE. Please contact us for delivery costs to these postcode areas.

Our 650 litre bunded heating oil tank is manufactured in our factory in the North East of England from mild steel plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and oils.

This self bunding steel oil tank is manufactured to comply with all current regulations. The inner and outer tanks are constructed from mild steel plate to BS EN 10025.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.

Included with this Bunded Heating Oil Tank is -

Tank Contents Gauge

2" BSP Fill Point with Cap

2" BSP Tank Vent with Cap

1" BSP Bottom Outlet (Top outlet on request)

1 1/2" Spare socket into bund for contents gauge

Top Lift points (Lift empty only)

10 Year Guarantee

Our 450 litre bunded heating oil tank is manufactured in our factory in the North East of England from mild steel plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and oils.

This self bunding steel oil tank is manufactured to comply with all current regulations. The inner and outer tanks are constructed from mild steel plate to BS EN 10025.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.

Included with this Bunded Heating Oil Tank is -

Tank Contents Gauge

2" BSP Fill Point with Cap

2" BSP Tank Vent with Cap

1" BSP Bottom Outlet (Top outlet on request)

1 1/2" Spare socket into bund for contents gauge

Top Lift points (Lift empty only)

10 Year Guarantee

This 650 Litre Rototek 3C Centurion Bunded Oil Tank is ideal for the safe, secure and environmentally responsible storage of heating oil. Rotationally moulded in the United Kingdom from a high grade Medium Density Polyethylene which is tough, durable and UV Stabilised to prevent colour fade.

The tanks come fully assembled and with an optional installation kit, making the tank simple and ready to install by an approved engineer.*

*Please note that all oil tanks should be installed by a suitably competent person in accordance with statutory requirements.

These bunded oil tanks come with a 10 year warranty if installed by an Oftec Approved Engineer and subsequently inspected annually by an Oftec Approved Engineer.

Standard fittings and parts supplied with the tank:

1” BSP Bottom Outlet

2 x 2 Inch Vents

Lockable Manhole Lid

4” Inspection aperture with lockable screw cap

Optional Fittings:

Apollo Bund alarm with plug in receiver

Float Level Gauge

Atkinson Installation Kit Comprising of:

1-0.5 inch reducer

Fuel Filter with lever type isolation valve

PTFE and Heldite thread sealant

Backed by a 10 year guarantee, this Plastic Bunded Heating Oil Tank by ATLAS is designed & Manufactured in Britain for a long lasting solution to your oil storage needs. 

The Atlas 650BSA comes complete with -

Bottom Outlet Kit

Overfill Prevention Valve

Watchman Sonic Gauge

4" Insepction Screw Lid

2" Tank Vent

Lockable Lid

10 year guarantee

This 650-litre capacity slimline environment-friendly bunded oil tank is suitable for the storage of heating oil in a domestic or commercial set up. It’s ideal for use when space is at a premium and additional tank technology is not a requirement.

Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing. Moulded in handles allow for the tank to be transported quite easily.

The Harlequin 650HQI comes complete with -

Integrally bunded

Bottom outlet with 1" BSP(F) thread

16" lockable access lid

4" lockable inspection cap

2" fill point

32mm hole with cover for electronic gauge

10 Year Guarantee

This 650-litre capacity slimline environment-friendly bunded oil tank is suitable for the storage of heating oil in a domestic or commercial set up where space is at a premium. Equipped with a range of fittings, including an ultrasonic contents gauge and bottom outlet fitting kit this bottom outlet tank provides a complete solution for a fully compliant installation.

Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing.

Integrally bunded

Bottom outlet with 1" BSP(F) thread

16" lockable access lid

4" lockable inspection cap

2" fill point

32mm hole with cover for electronic gauge

Ultrasonic contents gauge

Bottom outlet fitting kit

LRC overfill prevention probe

Inner tank vent