Diesel Transfer Pumps

The Piusi 3000 Supreme is a highly innovative device designed to offer full pump control and management from a smartphone app, thus helping users fill up with diesel from mobile tanks quickly and safely.

The Piusi 3000 Supreme is a compact, self-priming vane pump with a flow rate of up to 50 litres per minute. Thanks to its compact design, the Piusi 3000 supreme is easy to install on virtually any tank.

The Piusi smart pump will only turn on and dispense fuel to authorised smartphone app holders, which secures the fuel when a site is left out of hours. Giving you the ability to record dispensing data including quantity of fuel taken, and date and time, this refuelling pump provides a greater handle on how your fuel is being used and help to spot anomalies.

The Piusi 3000 Supreme intelligent pump manages its own operation to save time and eliminate causes of pump failure often associated with mobile tanks. Users and managers can pre-set the number of litres to dispense, reduce flow rate for filling jerry cans. The diesel transfer pump will automatically stop running if your tank runs out of fuel to protect itself from dry run damage. The pump can slow its own motor down to prevent overheating, allowing it to be continuously run unlike other battery powered models.

As standard the Supreme pump can have 2 users and stores the last 20 transactions on the app. By upgrading to the PRO you can have 10 users and the last 100 transactions can be stored on the app or can be downloaded to CSV file.

Multiple Piusi 3000 Supreme pumps can be integrated with the Piusi B.SMART cloud based fuel management software, meaning you can monitor mobile fuel tanks across unlimited sites remotely through a single online portal. This also allows up to 500 users and unlimited transactions to be stored and downloaded to CSV file.

Part of the ALPHA family of fuel dispenders, the ALPHA Petrol pump is a forecourt sytyle petrol dispenser designed for refilling fleets of vehicles.

The unit can easiliy be connected to an externam fuel management system, or be supplied with the comprehensive FC10 management system. Please contact us for a quote.

ALPHA Petrol specification -

1450mm H x 550mm W x 490mm D

4 Piston meter (+/- 0.25% accuracy)

Belt driven ATEX petrol pump

Stainless steel cabinet with seperate top housing for display

LCD Display with back light. Shows up to 99,999.9 litres, totaliser shows up to 99,999,999 litres

10:1 or 100:1 Pulser output for simple connection to fuel management systems

3.66m Steel braided fuel hose (12ft) (Nozzle not included)

 The ALPHA pump range are heavy duty ATEX certified diesel pumps which can be equipped with the comprehensive FC10 fuel management system, or easily be connected to a different system. Thanks to its robust construction, the ALPHA pumps will last years in service and are simple to maintain.

The unit can be modified to allow the holster to be mounted on either side, or the front of the unit.

Standard ALPHA pump specification -

4 Piston Flow Meter - +/- 0.25% Accuracy

LCD Display with back light. Shows up to 99,999.9 litres, totaliser shows up to 99,999,999 litres.

Uses virtually indestructable key tags - up to 65,000 on a system

Vehicle tag, odometer entry, odometer check & MPG calculation

Optional driver code &/or pin code entry 

GPRS modem for remote access

Web based software

Flexible report writer enables a wide range of fuel usage analysis by vehicle, department, vehicle type, fuel type, time & date 

Includes CO2 output readings

Multiple site capability & data consolidation

All features included as standard. No optional extras to purchase

Mobile app available for monitoring on phone or tablet

 The ALPHA pump range are heavy duty ATEX certified diesel pumps which can be equipped with the comprehensive FC10 fuel management system, or easily be connected to a different system. Thanks to its robust construction, the ALPHA pumps will last years in service and are simple to maintain.

The unit can be modified to allow the holster to be mounted on either side, or the front of the unit.

Standard ALPHA pump specification -

4 Piston Flow Meter - +/- 0.25% Accuracy

Belt driven pump unit

Stainless steel lockable cabinet with base mounting holes

LCD Display with back light. Shows up to 99,999.9 litres, totaliser shows up to 99,999,999 litres.

Integral 10:1 or 100:1 pulser transmitter for simple connection to fuel management systems

3.66m (12ft) Steel braided hose (No nozzle)

Options for 50, 70 or 90 litres per minute flow rates

ATEX Certificate Number - CML 15ATEX9183

The Pedrollo PLURIJET 6/90X is a self priming, multi-stage pump manufactured in Italy. The PLURIJET series are suitable for use with Clean water that doesn't contain any particles or with any liquids that aren't aggressive towards the materials the pump is made from.

Due to their silence, reliability & low power consumption, the PLURIJET 90 is recommended for domestic & civil applications, in particular for pressurising and distributing water in combination with pressure tanks.

Pump Body - Stainless steel AISI 304 complete with threaded ports in compliance with ISO 228/1

Body Backplate - Stainless steel AISI 304

Impellers - Noryl FE1520PW

Diffusers - Stainless steel AISI 304

Motor Shaft - Stainless steel EN10088-3 - 01.4104

Mechanical Seal - Graphite (stationary ring), Ceramic (rotational ring) & NBR

Inlet - 1-1/4 " F BSP

Outlet - 1" F BSP

The drum mounted SAMOA Polaris pump kit is designed to be easily connected to a drum with a 2" thread. Thanks to it's integral mechanical flow meter, this mains powered electric diesel transfer pump is a simple solution to dispensing in construction, workshire or agricultural environments.

This drum pump kit comes as standard with a Manual nozzle, 230v Polaris pump, 4 metre delivery hose & 3 digit mechanical flow meter.

he SAMOA Polux Series of DC Vane Pumps are high quality self priming pumps manufactured in Spain. These pumps come in either 12v or 24v, with flow rates of 43lpm or 65lpm (Depending on model). The pump body is made of cast-iron with rustproof treatment, rotor of sintered steel and vanes of acetal resin. The pumps include a by-pass valve and a built in filter with easy access for cleaning. The pump can be mounted vertically or horizontally, has a carrying handle and 2m cable with crocodile clamps.

The Polux pump kit version has the additional benefit of coming with all fittings required for portable diesel transfer, including a Fuel nozzle and Delivery hose with the option for 2 metres of suction hose and a flow meter.

Inlet/outlet connection: 1" BSP (F) or flange coupling

Maximum suction lift: 2.5m

Pressure: 0.8 bar

Electric DC motor with IP55 protection, allow intermittent operation duty with maximum cycles of 30 minutes.

Voltage: 24v

Options

684 524 - 43lpm - 4 metre delivery hose, manual nozzle

684 526 - 43lpm - 4 metre delivery hose, manual nozzle & 2m Suction hose kit

684 527 - 43lpm - 4 metre delivery hose, manual Nozzle, 2m Suction hose kit & digital flow meter

684 460 - 65lpm - 4 metre delivery hose, automatic nozzle

684 464 - 65lpm - 4 metre delivery hose,automatic nozzle, 2m Suction hose kit & digital flow meter

he SAMOA Polux Series of DC Vane Pumps are high quality self priming pumps manufactured in Spain. These pumps come in either 12v or 24v, with flow rates of 40lpm or 60lpm (Depending on model). The pump body is made of cast-iron with rustproof treatment, rotor of sintered steel and vanes of acetal resin. The pumps include a by-pass valve and a built in filter with easy access for cleaning. The pump can be mounted vertically or horizontally, has a carrying handle and 2m cable with crocodile clamps.

The Polux pump kit version has the additional benefit of coming with all fittings required for portable diesel transfer, including a Fuel nozzle and Delivery hose with the option for 2 metres of suction hose and a flow meter.

Inlet/outlet connection: 1" BSP (F) or flange coupling

Maximum suction lift: 2.5m

Pressure: 0.8 bar

Electric DC motor with IP55 protection, allow intermittent operation duty with maximum cycles of 30 minutes.

Voltage: 12v

Options

684 512 - 40lpm - 4 metre delivery hose, manual nozzle

684 951 - 40lpm - 4 metre delivery hose, manual nozzle & 2m Suction hose kit

684 514 - 40lpm - 4 metre delivery hose, manual Nozzle, 2m Suction hose kit & digital flow meter

684 461 - 60lpm - 4 metre delivery hose, automatic nozzle

684 465 - 60lpm - 4 metre delivery hose,automatic nozzle, 2m Suction hose kit & digital flow meter

The High Flow Rotary Hand Fuel Pump is a cost effective solution to the manual dispensing of a variety of fluids including diesel, oil, kerosene and petrol from a drum.

These hand fuel transfer pumps are commonly used within environments where mains power is inaccessible and therefore an electric pump is not a viable option, yet high flow rates need to be maintained. For example, these manual diesel transfer pumps are popular when a large amount of fuel needs to be transferred from one container to another.

This diaphragm pump is designed as a bilge pump for surface mounting on the deck/bulkhead. Thanks to it's innovative design, the pump body & ports can be positioned in 96 different ways to ensure flexibility. 

As this is a diaphragm pump, it can be used with dirty fuels with solids up to 12.5mm (with 1” hose tails) or 18mm (with 1½ ” hose tails).

The Pedrollo PLURIJET 90 is a self priming, multi-stage pump manufactured in Italy. The PLURIJET series are suitable for use with Clean water that doesn't contain any particles or with any liquids that aren't aggressive towards the materials the pump is made from.

Due to their silence, reliability & low power consumption, the PLURIJET 90 is recommended for domestic & civil applications, in particular for pressurising and distributing water in combination with pressure tanks.

Pump Body - Stainless steel AISI 304 complete with threaded ports in compliance with ISO 228/1

Body Backplate - Stainless steel AISI 304

Impellers - Stainless steel AISI 304

Diffusers - Stainless steel AISI 304

Motor Shaft - Stainless steel AISI 431

Mechanical Seal - Graphite (stationary ring), Ceramic (rotational ring) & NBR

Inlet - 1-1/4 " F BSP

Outlet - 1" F BSP

The Pedrollo CK 90 is a high quality liquid ring pump manufactured in Italy. The CK series are suitable for use with Diesel, Clean water that doesn't contain any particles or with any liquids that aren't aggressive towards the materials the pump is made from.

Due to the specific principle of their operating performance, the Pedrollo CK 90 is an excellent solution in every case where a compact, self priming pump is required or where the fluid flow is irregular or contains air. 400v version available on request.

Pump Body - Cast iron complete with threaded ports in compliance with ISO 228/1

Motor Bracket - Aluminium with brass insert (patented), reduces the risk of impeller seizure

Impeller - Brass star type with open radial vanes

Motor Shaft - Stainless steel EN 10088-3 - 1.4104

Mechanical Seal - Ceramic (stationary ring), Graphite (rotational ring) & Viton

Inlet / Outlet - 1" F BSP