Mild Steel Full Socket

The Fill-Rite Series 900 mechanical fuel flow meter is a reliable solution for measuring how much diesel, petrol, kerosene and biodiesel up to B30 has been dispensed. It operates via a nutating disk system and clearly displays quantities up to 9999 litres on the fuel counter face. The face on this easy to install and calibrate diesel fuel flow meter is also able to be rotated 90 degrees to increase the flexibility of the installation.

Approved to EX II 2G c T6, the Series 900 fuel counter meter is certified safe for the dispensing of flammable liquids and the transfer of fuel in potentially explosive environments. These petrol and diesel flow meters are also capable of performing accurately in gravity as well as pump systems, thanks to its low minimum flow rate.

The CTS single channel fuel tank alarm system provides the user with the choice of setting the alarm to alert of either a high level, low level or bund leak depending upon their requirements. This level and bund alarm is a simple and cost effective solution when the user only requires to be alerted of one scenario, therefore making the multi-zone tank level alarm over-specified.

Available in either mains or battery power, the single channel fuel tank alarm has a clear, descriptive seven segment LED display that informs the user of the activated tank state. Both versions feature a test button that will activate the 90dB sounder and flash the display showing the current configuration of the tank level alarm, and a mute button to silence the sounder. The battery powered version has a low battery warning to give notice that the battery needs changing.

The mains powered version has the additional feature of a volt-free relay for connecting the fuel storage tank alarm to another piece of equipment on-site such as a building management system, or another mains powered single channel alarm allowing the alarm status to monitored remotely for example in the office. Whilst commonly used as a diesel tank alarm, it is also suitable for use with a range of fluids such as water, waste oil and chemicals

This Cim-Tek Hydroglass Filter Element is a replacement, 10 micron element for the Cim-Tek Hydroglass Bio fuel storage tank filter. This fuel tank filter element can be easily fitted as a spin on cartridge when you need a replacement. The 100lpm element is suitable for the 70024 Cim-Tek filter.

Unlike the Cim-Tek Hydrosorb filters which use a paper element, the Cim-Tek Hydroglass alternatives make use of a high-performance fibre glass element for the more challenging nature of biodiesel. This Cim-Tek fuel filter also benefits from a higher dirt holding capacity which results in longer element life.

The Parker Carbopress Diesel Delivery Hose is a well-known brand of strong and durable fuel hose. Usually supplied as standard on the Piusi pump kits e.g. Cube, ST and Drum range, this diesel hose is often purchased as a replacement for an existing pumping installation. The Parker fuel dispensing hose is available in 4m and 6m assemblies as standard, but can also be purchased in coils or by the metre should you have differing requirements. A petrol version is also available.