Ultra Compact Heating Oil Bowl Filter

The Piusi Self Service MC AdBlue™ Management System is a sturdy, freestanding AdBlue™ dispenser complete with fluid monitoring capabilities for dispensing from an AdBlue storage tank™. Like the industry known Piusi fuel management systems, the Self Service for AdBlue™ records transaction data such as user, date, time and quantity dispensed for the last 255 transactions, providing the manager with important information as to where their AdBlue is being used. To enhance security, the system limits access to the integrated AdBlue™ pump to authorised users via pin code or electronic key (if purchased), which prevents just anyone from picking up the nozzle and dispensing AdBlue into their vehicle. 

This AdBlue™ dispenser comes with 6m delivery hose, pulse meter and SB325 automatic nozzle with a breakaway spout mechanism for cheap and easy repair if the vehicle drives off with the nozzle in the fill point. Also included is a pump start/stop nozzle holster and pre-set dispense feature, and has the ability to be connected to an optional AdBlue™ Ocio tank level gauge to cut off the pump when the fluid reaches a certain low level. 

The Piusi Self Service MC AdBlue™ Management System is a simple, easy to use and cost-effective solution for when the user requires the full pumping equipment and would benefit from transaction data and security. Whereas these stand-alone management systems show transaction data on the unit’s screen; there is an optional Self Service Management 2018 software package that permits the exporting of data to a local PC for analysis.

Software pack come with 10 x user keys and 1 x manager key

The Piusi AdBlue™ Hose Reel through careful design has been constructed to be able to limit pressure loss and facilitate use, even for high flow AdBlue pump applications. These retractable hose reels can be supplied either as a bare hose reel or complete with hose, and are designed for mounting onto a wall or inside an AdBlue™ storage tank. 

The AdBlue hose reel without hose will include a 3/4” BSP M swivel inlet connection, a hose tail fitting and a hose fastening clamp for easy connection. 

The Aquafighter Snake is a fuel tank water absorber designed to remove both free and suspended/emulsified water from fuel tanks of industrial machines, boats, and fuel storage tanks with small openings such as generator belly tanks.

The increase of bio content in fuel means that there is a rising issue associated with water contamination and microbial growth, which is responsible for a nasty sludge that blocks filters, damages equipment, corrodes engines and causes poor fuel efficiency. The Aquafighter water absorber eliminates these problems by reducing the water content levels down to 75ppm to meet the EN590 diesel fuel standards (200ppm), saving you costly damage and downtime. The diesel tank water absorber not only absorbs free water like other solutions on the market but also separates and captures the suspended and emulsified water in the fuel, which often gets left to cause serious damage to your vehicles and equipment. 

By working in this way, the Aquafighter Snake fuel tank water absorber provides numerous benefits including preventing diesel bug from forming, reducing filter replacement and need for tank cleaning and protecting the tank from corrosion. 

Please note: If this is your first time using Aquafighter, we recommend buying 2 units. The first can be added to absorb the current water, which may become full quickly if there is a large problem with water. The second to be added once the other has been removed to act as a prevention against future water content.

The Filstop 2" Overfill Prevention Valve is designed to act as the fill point for both metal and plastic tanks. The valve physically closes the inlet to the tank when the fuel level inside reaches it's maximum during a fuel delivery. This prevents damage to the tank, and environment as well as the costs associated with cleaning spilt fuel.

The steel tank version screws straight into the 2" BSP Inlet, whereas the plastic version requires a hole to be cut into the top of the tank for fixing via locknut.

Maximum Flow Rate – 580lpm

Minimum Flow Rate – 50lpm

Leak Rate when closed – 2.5lpm

Max Working Pressure – 7 Bar (Tested to 8 bar)

Max Spike Pressure – 12 Bar

Min Working Pressure – 0.15 bar

Tank Fitting – 2″ BSP Parallel Male Thread