Transfer Pumps

The Hytek engineered AdBlue Drum Pump Kit is designed to mount to the top of drums for easy transfer of DEF. The kit is designed to fit AdBlue containers that require a Trisure Connector for sealing. The frame is easy to move from drum to drum and comes with all necessary parts.

Pump Kit Specification -

Self Priming Diaphragm pump with Bypass valve

IP55 Weatherproof rating

AF2 Trisure Connector with 3 part suction tube, up to 1050mm Long

Built in filter, venting system & non return valve

Pump available in 12v or 230v

6 Metre delivery hose

Manual nozzle

Nozzle holder with switch

2 Metre cables

20 Minute max run time

30 litres per minute flow rate

1 year warranty

This self priming AdBlue pump is ideal for transferring bulk AdBlue (DEF) from Drums or IBC's into smaller containers or tanks. This AdBlue transfer pump comes fitted with an On/Off switch & a 1.8 metre power cable.

Pump Specification -

1" Male BSPP Inlet / Outlet, Supplied with 3/4" Hose Tails

Integral Bypass Valve

Max Run Time: 20 Minutes

Maximum Flow Rate: 35 Litres per minute

1.8 Metre power cable

On/Off Switch

230v

1 Year warranty

The SAMOA Flowstar High Perfomance series of oil transer pumps are high flow gear pumps designed for use with medium viscosity lubricating oils up to 450 cSt. Thanks to its sintered steel gears the flowstar series of oil pumps are long lasting and reliable.

The high flow Flowstar gear oil pumps are ideal for the transfer or distribution of large volumes of lubricants.

3/4" Female BSP Ports - 561 615

1" Female BSP Ports - 561 610, 561 611, 561 613 & 561 614

SAMOA Solura Blue 24v DC multi-diaphragm pump with no mechanical seals designed for dispensing AdBlue®/DEF and other water-based non corrosive products. Pump is self-priming and has a by-pass valve. Electric motors have IP55 protection and include on/off switch, fuse and 2m cable and crocodile clips.

Electric motor power: 310w

Inlet/outlet connection: 1" BSP (M)

Maximum suction lift: 1.8m

Maximum delivery pressure: 1.6 bar

Maximum delivery: up to 32 l/min

SAMOA Solura Blue 12v DC multi-diaphragm pump with no mechanical seals designed for dispensing AdBlue®/DEF and other water-based non corrosive products. Pump is self-priming and has a by-pass valve. Electric motors have IP55 protection and include on/off switch, fuse and 2m cable and crocodile clips.

Electric motor power: 260w

Inlet/outlet connection: 1" BSP (M)

Maximum suction lift: 1.8m

Maximum delivery pressure: 1.6 bar

Maximum delivery: up to 32 l/min

SAMOA Solura Blue 230v 50Hz AC multi-diaphragm pump with no mechanical seals designed for dispensing AdBlue®/DEF and other water-based non corrosive products. Pump is self-priming and has a by-pass valve. Electric motors have IP55 protection and include on/off switch, fuse and 2m cable with plug.

Electric motor power: 400w

Inlet/outlet connection: 1" BSP (M)

Maximum suction lift: 1.8m

Maximum delivery pressure: 1.6 bar

Maximum delivery: up to 30 l/min

The SAMOA Oil Bucket pumps include a 16 litre leak proof, all steel oval shaped bucket with carrying handle and foot rest for easy handling and stability. For dispensing high viscosity lubricants. Includes a medium pressure lever action pump (100 cc delivery per stroke) with a 1,5 m rubber hose with shut off valve and 135° angled nozzle

Maximum Outlet Pressure: 350 bar

The SAMOA Polux Series of DC Vane Pumps are high quality self priming pumps manufactured in Spain. These pumps come in either 12v or 24v, with flow rates of 40lpm or 60lpm (Depending on model). The pump body is made of cast-iron with rustproof treatment, rotor of sintered steel and vanes of acetal resin. The pumps include a by-pass valve and a built in filter with easy access for cleaning. The pump can be mounted vertically or horizontally, has a carrying handle and 2m cable with crocodile clamps.

Inlet/outlet connection: 1" BSP (F) or flange coupling

Maximum suction lift: 2.5m

Pressure: 0.8 bar

Electric DC motor with IP55 protection, allow intermittent operation duty with maximum cycles of 30 minutes.

On/off switch and fuse.

Pump Spec -

684 530 - 12v DC Diesel Pump - 22 amp - 140 watt - 40 litre/min

684 451 - 12v DC Diesel Pump - 38 amp - 220 watt - 60 litre/min

684 531 - 24v DC Diesel Pump - 13 amp - 160 watt - 43 litre/min

684 450 - 24v DC Diesel Pump - 25 amp - 240 watt - 65 litre/min

The SAMOA Polaris Series Wall Mounted transfer Pump Kit is a wall or tank mountable metered diesel pump kit housed within a lockable cabinet. The unit includes a 230v - 50Hz diesel pump with 1.8 m cable and plug, cabinet with nozzle holder with automatic on/off switch, 4m delivery hose, automatic nozzle and a three digit meter flange mounted to the pump and with a 90° swivelling elbow outlet.

Inlet connection: 1" BSP (F) or flange coupling

Maximum suction lift: 2.5m

Pressure: 1.7 bar

230v - 50hz - 3 amp - 500 watt

Electric AC motor with IP55 protection, allow continuous operation duty.

On/off switch and fuse.

The SAMOA Polaris Series Wall Mounted transfer Pump Kit is a wall or tank mountable metered diesel pump kit housed within a lockable cabinet. The unit includes a 230v - 50Hz diesel pump with 1.8 m cable and plug, cabinet with nozzle holder with automatic on/off switch, 4m delivery hose, automatic nozzle and a three digit meter flange mounted to the pump and with a 90° swivelling elbow outlet.

Inlet connection: 1" BSP (F) or flange coupling

Maximum suction lift: 2.5m

Pressure: 1.7 bar

230v - 50hz - 2.2 amp - 370 watt

Electric AC motor with IP55 protection, allow continuous operation duty.

On/off switch and fuse.

The SAMOA Polaris Series transfer Pump is a self priming diesel pump with self-adjustable vanes, Pump body made of cast-iron with rustproof treatment, rotor of sintered steel and vanes of acetal resin. The pumps include a by-pass valve and a built in filter with easy access for cleaning.  The pump can be mounted vertically or horizontally and has 1.8m cable with plug.

Comes wih -

230v 50z Polaris 70 Transfer Pump

4 Metre Delivery Hose

Dispensing Nozzle (Manual or Automatic options)

Fittings

Inlet/outlet connection: 1" BSP (F) or flange coupling

Maximum suction lift: 2.5m

Pressure: 1.7 bar

230v - 50hz - 3 amp - 500 watt

Electric AC motor with IP55 protection, allow continuous operation duty.

On/off switch and fuse.

The SAMOA Polaris Series transfer Pump is a self priming diesel pump with self-adjustable vanes, Pump body made of cast-iron with rustproof treatment, rotor of sintered steel and vanes of acetal resin. The pumps include a by-pass valve and a built in filter with easy access for cleaning.  The pump can be mounted vertically or horizontally and has 1.8m cable with plug.

Comes wih -

230v 50z Polaris 50 Transfer Pump

4 Metre Delivery Hose

Dispensing Nozzle (Manual or Automatic options)

2 Metre Suction Kit (Optional)

Fittings

Inlet/outlet connection: 1" BSP (F) or flange coupling

Maximum suction lift: 2.5m

Pressure: 1.7 bar

230v - 50hz - 2.2 amp - 370 watt

Electric AC motor with IP55 protection, allow continuous operation duty.

On/off switch and fuse.