Transfer Pumps

The SAMOA Flowstar DC portable oil transfer pump is an external gear pump of use with lubrication oils. Available with 12v or 24v motors, this external gear oil pump is compact and easy to install. Thanks to their small size, they can be installed as mobile oil pumps on vehicles, or fitted onto trolleys to be used where mains electricity is not available.

The SAMOA Flowstar series of oil transer pumps are high pressure gear pumps designed for use with medium-high viscosity lubricating oils. Thanks to its sintered steel gears the flowstar series of oil pumps are long lasting and reliable.

Models with electronic pressure switch start automatically whenever a pressure drop in the distribution line occurs (i.e. when a delivery gun is opened) and stops once pressure is built up in the line (i.e. when a delivery gun is closed).

The ports on these electric oil pumps are 3/4" Female BSP In/Out, however the pressure switch versions have a 1" BSP Female Outlet.

10lpm Versions - 10 bar - 600 watt

11lpm versions - 24 bar - 780 watt

13lpm versions - 15 bar - 780 watt

The SAMOA wall mounted diesel transer pump are a simple and ready to fit dispensing solution which can be connected to a new or existing fuel storage taml. This fuel dispensing pump comes with a 4 metre hose, 230v pump, 3 digit flow meter and a fuel dispensing nozzle. It can be mounted to a wall or directly onto an existing fuel tank.

This wall mounted fuel dispensing pump kit is an ideal product to use with small fleets of vehicles, agricultural machinery or any non-resale environment thanks to their compact size and low cost.

The drum mounted SAMOA Polaris pump kit is designed to be easily connected to a drum with a 2" thread. Thanks to it's integral mechanical flow meter, this mains powered electric diesel transfer pump is a simple solution to dispensing in construction, workshire or agricultural environments.

This drum pump kit comes as standard with a Manual nozzle, 230v Polaris pump, 4 metre delivery hose & 3 digit mechanical flow meter.

he SAMOA Polux Series of DC Vane Pumps are high quality self priming pumps manufactured in Spain. These pumps come in either 12v or 24v, with flow rates of 43lpm or 65lpm (Depending on model). The pump body is made of cast-iron with rustproof treatment, rotor of sintered steel and vanes of acetal resin. The pumps include a by-pass valve and a built in filter with easy access for cleaning. The pump can be mounted vertically or horizontally, has a carrying handle and 2m cable with crocodile clamps.

The Polux pump kit version has the additional benefit of coming with all fittings required for portable diesel transfer, including a Fuel nozzle and Delivery hose with the option for 2 metres of suction hose and a flow meter.

Inlet/outlet connection: 1" BSP (F) or flange coupling

Maximum suction lift: 2.5m

Pressure: 0.8 bar

Electric DC motor with IP55 protection, allow intermittent operation duty with maximum cycles of 30 minutes.

Voltage: 24v

Options

684 524 - 43lpm - 4 metre delivery hose, manual nozzle

684 526 - 43lpm - 4 metre delivery hose, manual nozzle & 2m Suction hose kit

684 527 - 43lpm - 4 metre delivery hose, manual Nozzle, 2m Suction hose kit & digital flow meter

684 460 - 65lpm - 4 metre delivery hose, automatic nozzle

684 464 - 65lpm - 4 metre delivery hose,automatic nozzle, 2m Suction hose kit & digital flow meter

he SAMOA Polux Series of DC Vane Pumps are high quality self priming pumps manufactured in Spain. These pumps come in either 12v or 24v, with flow rates of 40lpm or 60lpm (Depending on model). The pump body is made of cast-iron with rustproof treatment, rotor of sintered steel and vanes of acetal resin. The pumps include a by-pass valve and a built in filter with easy access for cleaning. The pump can be mounted vertically or horizontally, has a carrying handle and 2m cable with crocodile clamps.

The Polux pump kit version has the additional benefit of coming with all fittings required for portable diesel transfer, including a Fuel nozzle and Delivery hose with the option for 2 metres of suction hose and a flow meter.

Inlet/outlet connection: 1" BSP (F) or flange coupling

Maximum suction lift: 2.5m

Pressure: 0.8 bar

Electric DC motor with IP55 protection, allow intermittent operation duty with maximum cycles of 30 minutes.

Voltage: 12v

Options

684 512 - 40lpm - 4 metre delivery hose, manual nozzle

684 951 - 40lpm - 4 metre delivery hose, manual nozzle & 2m Suction hose kit

684 514 - 40lpm - 4 metre delivery hose, manual Nozzle, 2m Suction hose kit & digital flow meter

684 461 - 60lpm - 4 metre delivery hose, automatic nozzle

684 465 - 60lpm - 4 metre delivery hose,automatic nozzle, 2m Suction hose kit & digital flow meter

The SAMOA portable electric AdBlue dispensing trolley is designed for the dispensing of AdBlue specifically from a drum trolley. The Solura series AdBlue pump is securely mounted to the side of the drum trolley, which enables the whole pumping system to be moved with the drum wherever the dispensing point is. This is made even more convenient with the optional 15 metre power cable reel, making it much easier to refill AdBlue in more remote areas of the workshop.

This portable AdBlue trolley is an all in one solution for dispensing AdBlue from drums. It comes fitted with a 230v Solura series AdBlue pump, Passenger car type automatic nozzle, Trisure connector, delivery & suction hose. The optional cable reel allows dispensing up to 15 metres away from the power source whilst keeping the power cables tidy.

This diaphragm pump is designed as a bilge pump for surface mounting on the deck/bulkhead. Thanks to it's innovative design, the pump body & ports can be positioned in 96 different ways to ensure flexibility. 

As this is a diaphragm pump, it can be used with dirty fuels with solids up to 12.5mm (with 1” hose tails) or 18mm (with 1½ ” hose tails).

The Pedrollo PLURIJET 90 is a self priming, multi-stage pump manufactured in Italy. The PLURIJET series are suitable for use with Clean water that doesn't contain any particles or with any liquids that aren't aggressive towards the materials the pump is made from.

Due to their silence, reliability & low power consumption, the PLURIJET 90 is recommended for domestic & civil applications, in particular for pressurising and distributing water in combination with pressure tanks.

Pump Body - Stainless steel AISI 304 complete with threaded ports in compliance with ISO 228/1

Body Backplate - Stainless steel AISI 304

Impellers - Stainless steel AISI 304

Diffusers - Stainless steel AISI 304

Motor Shaft - Stainless steel AISI 431

Mechanical Seal - Graphite (stationary ring), Ceramic (rotational ring) & NBR

Inlet - 1-1/4 " F BSP

Outlet - 1" F BSP

The Hytek High Flow Diesel Transfer Pump is a low cost, high quality Fuel pump. The pump is suitable for Diesel or Biodiesel up to B100. 

Hytek 230v Diesel Pump Specification -

Self Priming, Direct Drive Vane Pump

230v 50hz

On / Off Switch

IP55 Weather Protection

2 Metre Power Cable

1" Inlet / Outlet

Duty Cycle: 30 minutes

80 L/min or 100 L/min maximum flow rate

Integral Bypass valve & Filter

Suitable for Diesel or B100

2 Year Warranty

The Hytek SPT60A Diesel Transfer Pump is a low cost, high quality Fuel pump. Due to the design of this pump, it can replace similar types of pumps as the location of the Inlet/Outlet ports & Footprint of the pump are the same as many others. With a low noise output & a 56 Litre per minute maximum flow rate, the SPT60A from Hytek is an economical choice for diesel transfer.

Hytek 230v Diesel Pump Specification -

230v 50hz Pump

On / Off Switch

IP55 Weather Protection

2 Metre Power Cable

1" BSPP Female Inlet / Outlet

Duty Cycle: 30 minutes

56 L/min maximum flow rate

Integral Bypass valve

Suitable for Diesel or Biodiesel

2 Year Warranty

The Hytek IBC Mounted AdBlue Transfer Pump kit, is supplied with all parts to enable quick and easy transfer of AdBlue from an IBC. Neatly fitted to a bracket, this pump kit comes fitted with the choice of an Automatic, or Manual nozzle.

AdBlue Pump Kit Specification -

Self Priming Diaphragm AdBlue Transfer Pump with 1.8m power cable

230v

Bypass valve & On/Off switch

30 Litres per minute flow rate

20 minute maximum run time

6 Metre delivery hose

1.5m Suction hose with SEC connector

Manual Nozzle or Automtic Nozzle with stainless spout

Integrated hose nozzle holder

2 Year warranty