Tiger Loop Bio Combi De-Aerator

The SpillStop 2” Overfill Prevention Valve protects both the environment and the individual from the effects of fuel spillage. This overfill protection device is suitable for use on both fuel and diesel storage tanks, which may have a pumping or gravity feed system. Once the tank has reached its maximum fuel capacity, this valve will close to prevent any additional fuel from being delivered, thus preventing overfilling. A version of this can be supplied specifically for use on plastic tanks.

Flow Rate Range (Litres per minute) - 35-600

Pressure Range (Bar) - 0.15-6

Working Temperature - -20/+50ºc

The Fill-Rite Series 900 mechanical fuel flow meter is a reliable solution for measuring how much diesel, petrol, kerosene and biodiesel up to B30 has been dispensed. It operates via a nutating disk system and clearly displays quantities up to 9999 litres on the fuel counter face. The face on this easy to install and calibrate diesel fuel flow meter is also able to be rotated 90 degrees to increase the flexibility of the installation.

Approved to EX II 2G c T6, the Series 900 fuel counter meter is certified safe for the dispensing of flammable liquids and the transfer of fuel in potentially explosive environments. These petrol and diesel flow meters are also capable of performing accurately in gravity as well as pump systems, thanks to its low minimum flow rate.

The Piusi Automatic ATEX Fuel Nozzles have been specially designed for the safe dispensing of diesel, petrol or kerosene in flammable environments thanks to its ATEX certification. The automatic shut-off mechanism means that these petrol and diesel nozzles stop further fuel from being released out of the spout once the vehicle tank is full, therefore preventing an overflow. These automatic fuel dispensing nozzles are suitable for use with non-resale pumping systems i.e. where private refuelling takes place. The Automatic 60 ATEX nozzle is commonly used alongside the Piusi EX50 ATEX Pump, and the Automatic 140 ATEX nozzle is for filling large agricultural and plant machinery alongside the Piusi EX140 ATEX Pump.

This single tank level alarm probe is designed for use with the CTS tank alarms, specifically to alert of either a high or low fluid level in water and chemical tanks. Constructed of polypropylene with a polyethylene cap, this tank level switch is suitable for use with many chemicals although we recommend that material compatibility should be checked.