Tecalemit HDA5 Cloud Based Multi Pump Fuel Management System

The Suzzara Blue DC 24v and 12v AdBlue™ Pump is the market leading AdBlue™ (DEF) transfer solution from Italian manufacturer Piusi. Complete with 2m cable and clips for connection to the vehicle’s battery, this AdBlue™ transfer pump doesn’t require mains power to operate, making it suitable when mobile refilling is required.

This self-priming, 5 chamber membrane 24v and 12v AdBlue™ pump does not have a shaft seal, which reduces the chance of leaking as it wears. As with the other Piusi pumps, this model has an incorporated bypass valve and benefits from IP55 protection grade making it suitable for use in outdoor environments.This is the pump used within all DC Piusi AdBlue™ pump kits, and is suitable for mounting onto a drum, IBC or AdBlue™ storage tank depending upon the application requirements.

The Husky 1690 Diesel Nozzle is an extremely heavy duty, automatic nozzle for high flow, bulk fuel transfer for applications including rail, tanker or filling fuel storage tanks. Specially designed for heavy duty applications, this Husky fuel nozzle benefits from a right angle design allowing the nozzle to fit close to walls and corners and has a large hand opening to accommodate for gloves. An added advantage is that it is 30% lighter than other models on the market.

A further feature of the 1690 fuel nozzle is its dual poppet, which allows for the easy opening of the trigger nozzle even when high system pressure is present due to higher flow. Please note models with swivel may have a slightly reduced flow rate.

The ATEX Approved Fuel Tank Alarm system is designed for alerting the user of a high fluid level or that there is fluid within the bund, which may indicate a leak or rain water ingress. ATEX certified to Zone 1, this tank level alarm is suitable for tanks containing flammable liquids, provided that the probe used is suitable.

This ATEX tank alarm is battery powered for use on portable installations or sites where mains power is inaccessible. The bund alarm benefits from a flashing red LED & 95db alarm which sounds to alert the user to a problem continuously for 120 seconds followed by a periodic beep for 60 minutes. This fuel tank level alarm has test battery, test alarm and alarm cancel functions for ease of use.

We offer a version that comes as standard with fuel tank probe for diesel, kerosene and JET A1 tanks, and a version without probe for other fluids such as petrol using a third party ATEX probe with solid stem.

The Angle Fuel Filter is designed to protect the inlet side of a pumping installation with its washable, removable wire mesh filter element and flanged connections. However, this particle filter also helps to change the inlet/outlet orientation, reduce the obstruction size of a 90º connection and act as a spillback device/line priming device to reduce system pressure. The model with the integrated spill back/line priming system does not come with a fuel filter as standard, as these are designed to be installed within an installation after the primary filtration.