Manufactured in the UK from Mild Steel Plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and light oils.

Included with this Bunded Oil Tank is -

Bund Gauge

Tank Contents Gauge

2" BSP Fill Point with Cap

2" BSP Tank Vent with Cap

1" BSP Base feed with Isolation Valve

Top Lift points (Lift empty only)

1" BSP Spare socket into bund

10 Year Guarantee

This self bunding, steel oil storage tank is manufactured to comply with all current regulations.
Suitable for above ground instillations at Domestic, Commercial, Agricultural and industrial locations for storage of Paraffin, Kerosene, diesel oils and light lubricant oils.

Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.

Mild steel rigid bunded container with steel portable bund fully welded with mechanical handling base and top lifting facility.  Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.

The unit is manufactured with an integrally bunded tank with capacity to hold an additional 10% of the total liquid being stored which is then fitted within a steel outer bund providing a secondary bund to the main storage tank. A bulk head is fitted in front of the storage tank to provide an area in which all the tanks control and dispensing equipment is housed.  A steel roller shutter door is provided for increased security

These units are built to the same stringent standards as the UN approved Fuel Bank range, and capable of being lifted and transported around site when full.

Compliancy:

BS799 part 5,

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26

Harlequin Fuel Stations are the ultimate in diesel dispensing tanks and technology. Featuring forecourt style refuelling convenience and a range of added value technologies as standard, these high specification fuel tanks provide complete diesel storage and dispensing solutions

This 7500-litre Fuel Station is an ideal choice for any on-site refuelling requirement. It’s environment-friendly bunded design allows it to safely store and dispense fuel in any small commercial, industrial or agricultural environment. This simple and easy to use diesel storage and dispensing solution is manufactured from high-quality mouldings and materials. It can be customised further by adding fuel dispensing accessories such as a high-speed fuel pump.

Features:

Fully Bunded

56L/min 240Volt fuel pump

Fuel Management System (240V only)*

10Micron particulate & water filter

6m length; 1” delivery hose

Auto shut-off nozzle

Bulkhead light

2” BSP fill point

4” lockable inspection port

LRC overfill prevention probe

Electronic Level Gauge

*110V, 12V, 24V fuel pumps available. 72L/min fuel pump & fuel management system available in 230V only. Low voltage tanks have a mechanical flow meter in place of the fuel management system.

Optional Extras (Additional Cost):

72L/min fuel pump

Installation:

Base Length: 2,940mm

Base Width: 2,305mm

Harlequin’s range of premium quality water tanks have been available for over 20 years. The wide range of sizes includes the popular larger tanks for commercial applications and small slimline tanks convenient for domestic applications.

This 1100-litre slimline aboveground water storage tank is suitable for storing potable and non-potable water and to be used for agricultural, domestic, commercial or industrial purposes. It’s ideal for those very awkward installations.

Moulded from Medium Density Polyethylene, this tank complies with UK Water Supply Regulations 1999, Water Byelaws 2004 Scotland and Water Supply Regulations (Northern Ireland). The UV stabilised polymer ensures that the tank is protected against potentially damaging effects of sunlight. The potable version is approved by KIWA Watertec and WRAS.

Various Installations – Can be used for agricultural, domestic, commercial or industrial premises.

Non Corrosive – manufactured from Medium Density Polyethylene (MDPE), Harlequin tanks will never corrode.

Protection against Sunlight – They are manufactured from UV stabilised polymer protecting the tank against potentially damaging effects of sunlight.

Slimline & Low Profile Options – For more awkward installations, slim and low to ground tank options are available.