Divertek Submersible AdBlue Pump (230v)

The Continental 2” AdBlue™ Delivery Hose is designed for bulk dispensing into and out of AdBlue™ storage tanks. It is a popular choice for installation onto an AdBlue™ delivery tanker thanks to its ISO 22241 approval for quality, safety and contamination standards. This AdBlue™ hose is available to order by the metre or in coils if the user has a large requirement.

The CTS single channel fuel tank alarm system provides the user with the choice of setting the alarm to alert of either a high level, low level or bund leak depending upon their requirements. This level and bund alarm is a simple and cost effective solution when the user only requires to be alerted of one scenario, therefore making the multi-zone tank level alarm over-specified.

Available in either mains or battery power, the single channel fuel tank alarm has a clear, descriptive seven segment LED display that informs the user of the activated tank state. Both versions feature a test button that will activate the 90dB sounder and flash the display showing the current configuration of the tank level alarm, and a mute button to silence the sounder. The battery powered version has a low battery warning to give notice that the battery needs changing.

The mains powered version has the additional feature of a volt-free relay for connecting the fuel storage tank alarm to another piece of equipment on-site such as a building management system, or another mains powered single channel alarm allowing the alarm status to monitored remotely for example in the office. Whilst commonly used as a diesel tank alarm, it is also suitable for use with a range of fluids such as water, waste oil and chemicals

The O.L.E C2020 is a high accuracy electronic gauge for use with fuel tanks that are up to 3m or 5m high. Designed for use outdoors, the C2020 tank gauge features an IP65 rated enclosed, and an easy to read backlit display which indicates the contents of the fuel tank as a percentage, and in litres.

The C2020 provides a continuous reading of the contents inside the tank, and can be equipped with an alarm to also act as a leak/overfill alarm.

Thanks to the design, this electronic tank gauge can be used to give accurate readings of any shaped tank.

C2020 tank gauges come as standard with 4-20mA outputs, and so can be connected to BMS (Building Management Systems).

O.L.E C2020 Gauge Specifications -

Suitable for any shape tank

+/- 1% Accuracy

Suitable for use with Diesel, B100 Biodiesel, AdBlue & Antifreeze

Backlit electronic display

Gives continuous readout in litres (screen also shows a % bar)

Includes 4-20mA outputs

Can connect to BMS System

Weatherproof to IP65

Power supply can be 230v, 110v or 24v DC

The Magnus HAWKi is a battery powered radar Smart Gauge which is viewed through a a smartphone app via Bluetooth. Although offered as a way to view the contents on a heating oil tank, it can also be used with various other liquids and has a IP68 Weatherproof rating so can be left uncovered outside. The gauge is easy to fit* and requires no drilling (for plastic tanks) so preserves the structural integrity of your tank. Unlike other smart gauges, there is no ongoing costs making it a perfect solution and cost effective solution.

The smartphone app has various features including: Daily usage rate, approximate days until empty tank, current tank level and customisable low level alert/theft alert. Where there are multiple tanks the same app can be used to monitor other HAWKi gauges.

*For steel tanks please contact us as additional instructions/adaptors may be required