These stainless steel hex nipple fittings are available in equal and reducing versions. Both versions come in a range of sizes, all being M x M.

The Oil Lifter is designed for domestic heating oil applications when a higher than normal lift is required. The system sucks up the oil from the tank and stores it in its 3.5litre reservoir that then feeds the boiler. The internal suction solenoid pump ensures continuous oil supply to the heating system. If the oil lifter is required to be fitted inside a building then the optional drip tray with leak detector is required.

Aquafighter Large Canvas is a fuel tank water absorber designed to remove both free and suspended/emulsified water out of diesel fuel directly in the tank, therefore providing a complete solution for water contamination. Aquafighter Canvas comes in two sizes, Medium and Large, depending on the size of the fuel storage tank. The diesel and oil tank water absorber is typically used for removing water from bulk fuel storage tanks and generator tanks.

The medium size is suitable for a tank with a capacity of up to 5,000 litres with the access of at least 12cm and the large size for a capacity of up to 10,000 litres with the access of at least 16cm. Both sizes of the fuel tank water absorber can be manipulated through tank opening but not through a long pipe.

The bound and free water in a storage tank can cause issues associated with microbial growth, known as "diesel bugs", which is responsible for creating a nasty sludge that blocks filters, damages your equipment, causes engine system corrosion and poor fuel efficiency. The Aquafighter water absorber eliminates these problems by reducing the water content levels down to 75ppm to meet the EN590 diesel fuel standards (200ppm) and saving you costly damage and downtime. Unlike other solutions on the market, this diesel tank water absorber not only removes free water but also separates and captures the suspended and emulsified water, which often gets left to cause serious damage to your vehicles and equipment. 

By doing this, the Aquafighter Canvas fuel tank water absorber provides numerous benefits including preventing diesel bug from forming, reducing filter replacements and need for tank cleaning and protecting the tank from corrosion. 

Please note: If this is your first time using Aquafighter, we recommend buying 2 units. The first can be added to absorb the current water, which may become full quickly if there is a large problem with water. The second to be added once the other has been removed to act as a prevention against future water content.

The Pedrollo CK 50 is a high quality liquid ring pump manufactured in Italy. The CK series are suitable for use with Diesel, Clean water that doesn't contain any particles or with any liquids that aren't aggressive towards the materials the pump is made from.

Due to the specific principle of their operating performance, the Pedrollo CK 50 is an excellent solution in every case where a compact, self priming pump is required or where the fluid flow is irregular or contains air. 400v & model with bypass available on request.

Pump Body - Cast iron complete with threaded ports in compliance with ISO 228/1

Motor Bracket - Aluminium with brass insert (patented), reduces the risk of impeller seizure

Impeller - Brass star type with open radial vanes

Motor Shaft - Stainless steel EN 10088-3 - 1.4104

Mechanical Seal - Ceramic (stationary ring), Graphite (rotational ring) & Viton

Inlet / Outlet - 3/4" F BSP