Stainless Steel Y-Line Strainer

PTFE Tape is a cost effective method of sealing joints and pipework with course threads. It is used within a variety of industries by engineers including fuel tank manufacturers and plumbing and heating installers. PTFE thread sealing tape is excellent at defeating friction, and when used on tapered pipe joints, performs a lubricating function that allows the threads to be easily screwed together.

The Oil Lifter is designed for domestic heating oil applications when a higher than normal lift is required. The system sucks up the oil from the tank and stores it in its 3.5litre reservoir that then feeds the boiler. The internal suction solenoid pump ensures continuous oil supply to the heating system. If the oil lifter is required to be fitted inside a building then the optional drip tray with leak detector is required.

The Cim-Tek Filter Element is a replacement, 2 micron element for the Cim-Tek Hydroglass Bio fuel storage tank filter. This fuel tank filter element can be easily fitted as a spin on cartridge when you need a replacement.The 70lpm element is suitable for the 70232 Cim-Tek filter, whereas the 100lpm element is compatible with the 70037 Cim-Tek fuel filter.

Unlike the Cim-Tek Hydrosorb filters which use a paper element, the Cim-Tek Hydroglass alternatives make use of a high-performance fibre glass element for the more challenging nature of biodiesel. This Cim-Tek fuel tank filter also benefits from a higher dirt holding capacity which results in longer element life.

The Pedrollo CK 50 is a high quality liquid ring pump manufactured in Italy. The CK series are suitable for use with Diesel, Clean water that doesn't contain any particles or with any liquids that aren't aggressive towards the materials the pump is made from.

Due to the specific principle of their operating performance, the Pedrollo CK 50 is an excellent solution in every case where a compact, self priming pump is required or where the fluid flow is irregular or contains air. 400v & model with bypass available on request.

Pump Body - Cast iron complete with threaded ports in compliance with ISO 228/1

Motor Bracket - Aluminium with brass insert (patented), reduces the risk of impeller seizure

Impeller - Brass star type with open radial vanes

Motor Shaft - Stainless steel EN 10088-3 - 1.4104

Mechanical Seal - Ceramic (stationary ring), Graphite (rotational ring) & Viton

Inlet / Outlet - 3/4" F BSP