Stainless Steel Equal Tee

The Suzzara Blue AC Electric AdBlue™ Pump is the market leading AdBlue™ (DEF) transfer solution from Italian manufacturer, Piusi. This mains powered AdBlue™ transfer pump is ideal for fixed pumping installations and is commonly seen on many bulk tanks and static IBC applications, as it is the model that makes up all AC Piusi pump kits. There is a version available complete with timer, that switches the AdBlue™ pump off after 6 minutes of running to prevent damage to the pump if accidentally left on by the user.

This self-priming, 5 chamber membrane electric AdBlue™ pump does not have a shaft seal, which limits the possibility of leaking as it wears. As with the other Piusi pumps, this model has an incorporated bypass valve and is IP55 protection grade rated meaning that it is suitable for installation outdoors.

The K24 Flow Meter is a digital flow meter with a turbine suitable for AdBlue monitoring and the digital management of the fluid being dispensed.

PRECISION AND QUALITY

The K24 digital AdBlue flow meter has been designed to monitor the flow of AdBlue. Easy to install, in-line or at the end of the dispensing pipe, The K24 has a display that can be applied in various positions to facilitate easy reading. The sturdy housing and sealed internal electronic board make it suitable for use in virtually all working conditions.

RELIABILITY

The K24 Digital Flow Meter has a plastic body with a polypropylene turbine. The pulse type is single-channel, reed switch. The electronic board with an LCD display shows a partial reading of 5 digits from 0.1 to 99999, for a total of 6 digits 1 to 999999 Total, resettable. The display also shows the supported flow rate, up to a maximum of 120 litres per minute.

The K24 AdBlue flow meter guarantees a metering accuracy of +/- 1%; if the metering turns out inaccurate, the K24 can always be calibrated to ensure maximum precision in its operation. With a pressure drop of < 0.03 bar at 120 l/min and a repeatability of 0.2 %, the K24 flow meter is powered by two AAA batteries. Thanks to its rotating display, the K24 can be adapted to any application and working condition.

The GSM Text Alerter is a remote fuel tank level monitoring device suitable for fuel and oil tanks. This simple to install unit allows the user to set up four trigger inputs, which upon activation sends a customised text message to up to eight mobile phones. This oil tank monitor is designed to alert the user to a low fuel condition, or alert of a high level should they require to know when the tank needs emptying. By setting the probes at half full and low level, the Text Alerter can also be used to alert of a sudden drop in the fuel level when receiving two texts in short succession, which may indicate theft or tank containment failure.

There is also a version of this tank level monitoring device available without the probes. This is designed to be connected via its simple, clean contact inputs, to another device such as the output relays on a fuel tank alarm or the relays on the Piusi Ocio Gauge.

The Groz Fuel Tank Filter is designed primarily designed for gravity flow conditions, although it can sometimes be fitted to a pump dispensing system depending upon the flow rate. Thanks to its clear plastic bowl, this diesel filter allows the user to identify any debris or particles within the fuel. It also has a drain point at the base of the bowl for the easy removal of filtered contaminants.

These fuel storage tank filters for diesel should be changed when the flow rate of the system starts to slow, as this may be an indication that the filter is full.