Stainless Steel Hose Tail

The Premium AdBlue™ Gravity Hose Kit is a high quality, ready-made solution for the dispensing of AdBlue™ from a bottom outlet, gravity fed installation. Gravity hose kits are a cost effective solution for dispensing AdBlue™ (otherwise known as DEF) from an IBC rather than installing an AdBlue pump system. This is a popular solution for, but not limited to, the agricultural market.

This model of AdBlue™ gravity hose kit is made up of the long life Piusi AdBlue™ delivery hose swaged onto ring clamps for durability, the Suzzara Blue manual nozzle, a 60 x 6 IBC bottom adaptor and cam fitting to enable the quick connection and disconnection of the kit from the IBC. It available in a number of lengths from 3m to 7m, to cater for how high off the ground the IBC in question is. You should not order a kit much longer than what is necessary for the height of the system, as any additional hose beyond this point may reduce the flow rate you could be achieving.

The GoldenRod Mesh Filter can be used in place of the paper cartridge that comes as standard with the GoldenRod 495 fuel filters. Thanks to its stainless steel construction, this mesh strainer GoldenRod filter can be emptied and cleaned of debris as it starts to collect impurities from the fuel. This makes it reusable rather than having to be replaced as the element gets full.

As it is only able to filter our larger particles in comparison to the other Goldenrod fuel tank filter elements, the mesh version is often seen used in conjunction with the paper cartridges. With the mesh version installed inline first, it is able to catch any large contaminants that have made their way into the tank such as rubble, grass or hay, leaving the paper one to filter out the smaller bits. This prevents premature blocking of new filter elements. The mesh element is also sometimes used temporarily in place of the paper cartridge when using a tank that hasn't been used in a while and the user isn't sure on the fuel quality, or where used cooking oils are being recycled to make biodiesel and is likely to contain larger contaminants.

Aquafighter Large Canvas is a fuel tank water absorber designed to remove both free and suspended/emulsified water out of diesel fuel directly in the tank, therefore providing a complete solution for water contamination. Aquafighter Canvas comes in two sizes, Medium and Large, depending on the size of the fuel storage tank. The diesel and oil tank water absorber is typically used for removing water from bulk fuel storage tanks and generator tanks.

The medium size is suitable for a tank with a capacity of up to 5,000 litres with the access of at least 12cm and the large size for a capacity of up to 10,000 litres with the access of at least 16cm. Both sizes of the fuel tank water absorber can be manipulated through tank opening but not through a long pipe.

The bound and free water in a storage tank can cause issues associated with microbial growth, known as "diesel bugs", which is responsible for creating a nasty sludge that blocks filters, damages your equipment, causes engine system corrosion and poor fuel efficiency. The Aquafighter water absorber eliminates these problems by reducing the water content levels down to 75ppm to meet the EN590 diesel fuel standards (200ppm) and saving you costly damage and downtime. Unlike other solutions on the market, this diesel tank water absorber not only removes free water but also separates and captures the suspended and emulsified water, which often gets left to cause serious damage to your vehicles and equipment. 

By doing this, the Aquafighter Canvas fuel tank water absorber provides numerous benefits including preventing diesel bug from forming, reducing filter replacements and need for tank cleaning and protecting the tank from corrosion. 

Please note: If this is your first time using Aquafighter, we recommend buying 2 units. The first can be added to absorb the current water, which may become full quickly if there is a large problem with water. The second to be added once the other has been removed to act as a prevention against future water content.

The Husky Osprey Aviation Fuel Nozzle is designed specifically for over the wing refuelling of aircraft. As an automatic refuelling nozzle, the Osprey will shut off when the aircraft tank is full to prevent an overfill situation. An easy to service stainless steel fuel filter screen is incorporated in the nozzle, and it benefits from a red scuff guard and waffle guard to allow the user to quickly identify that it is for use with aviation fuel.

Further features of this Husky nozzle is a pressure sensing valve to ensure that it only dispenses fuel when the pump is in operation, and a ground cable and clip for earthing the refuelling nozzle to the aircraft.