Stainless Steel Hex Nipple

The Submersible AdBlue™ Pump has been designed to be installed in large AdBlue™ tank installations where increased head pressure is required. This is a popular AdBlue™ transfer pump solution for tank manufacturers, as being submerged into the fluid means the storage tank cabinet does not need to make room for a pump to be fitted. 

These electric AdBlue™ pumps are built from anti-corrosive materials with a three stage impeller, wear resistant shaft and an anti-debris stainless steel strainer. The seals within this AdBlue™ pump - known as a DEF pump in the US - have been designed to keep the urea pure and the electrical cable gland seal has been reinforced. The pump’s motor has excellent cooling properties and can be used even when the top of the motor becomes partially exposed.

This High Capacity Diesel Hose Reel, which comes in 25m and 30m, has extended our hose reel range by providing larger reels specifically designed for use with diesel. This fuel hose reel comes with BSP fittings, rather than the conical fittings often seen on larger reels, in order for easy connection to refuelling nozzles.

This retractable diesel fuel hose reel comes with a single or double spring for rewinding the hose, and can also be locked to a desired length via the automatic system. This diesel hose reel is ideal for environments where the vehicle being refuelled is unable to gain access to the fuel storage tank. This problem is typical of vehicles being refuelled on construction, plant and quarry sites, as well as boats being refuelled in marinas.

The 25m and 30m fuel hose reels are designed for use with industrial pumps up to 10 bar pressure.

The Piusi AdBlue™ Hose Reel through careful design has been constructed to be able to limit pressure loss and facilitate use, even for high flow AdBlue pump applications. These retractable hose reels can be supplied either as a bare hose reel or complete with hose, and are designed for mounting onto a wall or inside an AdBlue™ storage tank. 

The AdBlue hose reel without hose will include a 3/4” BSP M swivel inlet connection, a hose tail fitting and a hose fastening clamp for easy connection. 

The Ridart anti-syphon (pressure regulating) valves cope with higher fuel dispensing pump flow rates of up to 200 litres per minute. Fully adjustable depending on the height of the tank/head pressure of fuel, this anti-syphon (pressure regulating) valve ensures the dispensing pumps are not being overworked and prevents fuel from coming out of the pump unit air separator outlet valve. It helps to prevent fuel loss and fuel contamination. This anti-syphon (pressure regulating) valve is easy to install as it comes with 1½" female BSPT flanged inlet and outlet ports.