Stainless Steel Full Socket

The Ultra Compact Oil Tank Filter Kit is designed for bottom outlet domestic heating oil tanks to remove debris with instant isolation and no pollution risk. The kit is comprised of the Ultra Compact isolation valve, 50 micron oil filter, PTFE tape, Heldite and all of the fittings required for installation. 

On other oil tank filter assemblies, an isolation valve is not the first component screwed into the tank which means that if the filter valve needs replacing then the tank needs to be drained. By having the Ultra Compact valve installed first, this filter assembly kit saves the engineer the couple of hours it would previously have taken to pump the tank out, replace the filter valve and then pump the heating oil back in. 

The Ultra Compact oil tank isolator valve is also available alone to replace the 1" BSPT x 1/2" BSPP adaptor if a generic filter kit is already installed. Both the filter kit and the valve alone can be retrofitted during service or at the time of the original tank installation. 

The Piusi Depuroil is a mobile filtration unit for de-contaminating oils by removing debris and particles from the fluid. This oil filtration system comes in the form of a sturdy trolley unit with wheels enabling the unit to be easily transported. It has an integrated particle filter cannister and a pressure gauge to warn of a filter blockage and that the cannister needs to be replaced (one replacement cannister is supplied. As well as a Viscomat pump, it comes with a suction hose and strainer, delivery hose with a dispensing tube. and a support holder for the suction hose and dispensing valve allowing neat and compact storage.

The Piusi Depuroil fuel conditioner is commonly used for cleaning out waste oil tanks as well as filtering used machinery oil and vehicle oil so that it can be recycled and reused.

The Hytek IBC Mounted AdBlue Transfer Pump kit, is supplied with all parts to enable quick and easy transfer of AdBlue from an IBC. Neatly fitted to a bracket, this pump kit comes fitted with the choice of an Automatic, or Manual nozzle.

AdBlue Pump Kit Specification -

Self Priming Diaphragm AdBlue Transfer Pump with 1.8m power cable

230v

Bypass valve & On/Off switch

30 Litres per minute flow rate

20 minute maximum run time

6 Metre delivery hose

1.5m Suction hose with SEC connector

Manual Nozzle or Automtic Nozzle with stainless spout

Integrated hose nozzle holder

2 Year warranty

The SAMOA Flowstar series of oil transer pumps are high pressure gear pumps designed for use with medium-high viscosity lubricating oils. Thanks to its sintered steel gears the flowstar series of oil pumps are long lasting and reliable.

Models with electronic pressure switch start automatically whenever a pressure drop in the distribution line occurs (i.e. when a delivery gun is opened) and stops once pressure is built up in the line (i.e. when a delivery gun is closed).

The ports on these electric oil pumps are 3/4" Female BSP In/Out, however the pressure switch versions have a 1" BSP Female Outlet.

10lpm Versions - 10 bar - 600 watt

11lpm versions - 24 bar - 780 watt

13lpm versions - 15 bar - 780 watt