Semi Rotary K Series Hand Pump

From Piusi is the EX50 ATEX approved 12v fuel transfer pump, which has taken our product range into the market for flammable liquids. Designed for the mobile and static transfer of petrol, kerosene and diesel in a zone one environment, these ATEX pumps satisfy the European directives for explosion proof equipment. This petrol transfer pump has a sturdy, cast iron body, and thanks to its quality manufacturing has a long life span. Incorporated in the 12 volt fuel transfer pump body is an integrated bypass valve.

These ATEX pumps are available in mains or low voltage, and are also available as part of a drum kit that comes with drum connector and nozzle holster. This Italian made 12v fuel transfer pump has an anti-noise filter which makes the pump application more convenient with a low level of noise.

Designed for fuel dispensing and transfer,not fuel recirculation systems.

Please note: Power cables & connectors are dependant upon the individual site risk assessment for the connection method between the ATEX Piusi fuel pump and power source.

The CTS Ultra Compact Oil Tank Filter Kit is designed for bottom outlet domestic heating oil tanks to remove debris with instant isolation and no pollution risk. The kit is comprised of the Ultra Compact isolation valve, 40µ cleanable alloy bowl filter and all of the fittings required for installation. 

On other oil tank filter assemblies, an isolation valve is not the first component screwed into the tank which means that if the filter valve needs replacing then the tank needs to be drained. By having the Ultra Compact valve installed first, this filter assembly kit saves the engineer the couple of hours it would previously have taken to pump the tank out, replace the filter valve and then pump the heating oil back in. 

The Ultra Compact oil tank isolator valve is also available alone to replace the 1" BSPT x 1/2" BSPP adaptor supplied with generic filter assemblies e.g. the ARMKIT. Both the filter kit and the valve alone can be retrofitted during service or at the time of the original tank installation. 

The Aluminium Fuel Tank Vent Cowl is designed to fit over the male thread on the top of an above ground storage tank to provide ventilation. These vent cowls come three lugs for direct fitting, one with an Allan key screw fitting to help secure the cowl to the male thread of the tank.

Malleable Black Iron 90 degree elbows. Stock sizes from 1/2" to 2" BSP. Larger sizes on request.