Samoa Solura 230v AdBlue Transfer Pump

The CTS Mains Operated Multi-Compartment Fuel Tank Alarm system has three functions; to detect and warn of a tank overfill, a high/low liquid level and a bund leak. If this fuel tank alarm identifies any of these issues, the zone in question will light up on the alarm’s screen, combined with an alarm sounder and flashing orange strobe, which provides the user with a clear warning of the activated tank state. Each zone can be configured in any of the three functions High, Low or Bund, enabling the complete customisation of these fuel tank alarms based upon the user's requirements with a very simple set of electrical jumpers.

Options are available complete with three relays, to allow external equipment to be connected to each zone of the tank level alarm such as building management system for remote monitoring. This level and bund alarm also has the additional feature of controlling the pump from the relays (if fitted). When the fuel storage tank contents are 'low', the pump switches on and stays on until 'high' is reached.

If you require a tank level alarm for something other than diesel or light oil, we also supply a water and chemical alarm probe, and a high viscosity oil tank level probe – which is also suitable for AdBlue as well as high viscosity oils.

The Angle Fuel Filter is designed to protect the inlet side of a pumping installation with its washable, removable wire mesh filter element and flanged connections. However, this particle filter also helps to change the inlet/outlet orientation, reduce the obstruction size of a 90º connection and act as a spillback device/line priming device to reduce system pressure. The model with the integrated spill back/line priming system does not come with a fuel filter as standard, as these are designed to be installed within an installation after the primary filtration.

The SAMOA Mechanical Nutating Disk Flow Meter is suitable for high-accuracy monitoring of diesel & Comes fitted with a 4 digit resettable totaliser (999.9L Max) & a 6 Digit non resettable totaliser. This Mechanical Flow Meter from SAMOA is suitable for gravity fed applications with a minimum flow of 20 litres per minute & has a very low pressure drop.

The meter allows to orientate the inlet and outlet in four different positions.

Maximum working pressure: 10 bar

Flow range: 20 to 100 litre/min

Precision after calibration: +/- 1%

This diaphragm pump is designed as a bilge pump for surface mounting on the deck/bulkhead. Thanks to it's innovative design, the pump body & ports can be positioned in 96 different ways to ensure flexibility. 

As this is a diaphragm pump, it can be used with dirty fuels with solids up to 12.5mm (with 1” hose tails) or 18mm (with 1½ ” hose tails).