Samoa Solura 12v AdBlue Transfer Pump

The Brass BSPT Hose Tail is available in a range of different thread sizes. These hose tails can also be used on hoses with inner diameters from 12mm up to 50mm, making them a versatile fitting.

The Husky high flow swivel is used on nozzles when the maximum flow rate that the nozzle is able to achieve needs to be guaranteed – for example, the Husky VIII nozzle.

High flow nozzles such as the Husky VIII Diesel Nozzle are often used for refuelling large plant equipment, agricultural machinery and lorries, and the user may therefore need to maintain the flow to fill the fuel tank as quickly as possible.

This high flow swivel has been designed so that flow rates of up to 378 lpm can be achieved, whilst also allowing free movement to the nozzle. 

The Cim-Tek Filter Element is a replacement, 2 micron element for the Cim-Tek Hydroglass Bio fuel storage tank filter. This fuel tank filter element can be easily fitted as a spin on cartridge when you need a replacement.The 70lpm element is suitable for the 70232 Cim-Tek filter, whereas the 100lpm element is compatible with the 70037 Cim-Tek fuel filter.

Unlike the Cim-Tek Hydrosorb filters which use a paper element, the Cim-Tek Hydroglass alternatives make use of a high-performance fibre glass element for the more challenging nature of biodiesel. This Cim-Tek fuel tank filter also benefits from a higher dirt holding capacity which results in longer element life.

The Pedrollo PLURIJET 6/90X is a self priming, multi-stage pump manufactured in Italy. The PLURIJET series are suitable for use with Clean water that doesn't contain any particles or with any liquids that aren't aggressive towards the materials the pump is made from.

Due to their silence, reliability & low power consumption, the PLURIJET 90 is recommended for domestic & civil applications, in particular for pressurising and distributing water in combination with pressure tanks.

Pump Body - Stainless steel AISI 304 complete with threaded ports in compliance with ISO 228/1

Body Backplate - Stainless steel AISI 304

Impellers - Noryl FE1520PW

Diffusers - Stainless steel AISI 304

Motor Shaft - Stainless steel EN10088-3 - 01.4104

Mechanical Seal - Graphite (stationary ring), Ceramic (rotational ring) & NBR

Inlet - 1-1/4 " F BSP

Outlet - 1" F BSP