Samoa Reelmaster Heavy Duty Diesel Hose Reel - 1" x 15m

The SAMOA Mechanical Nutating Disk Flow Meter is suitable for high-accuracy monitoring of diesel & Comes fitted with a 3 digit resettable totaliser (99.9L Max) & a 6 Digit non resettable totaliser. This Mechanical Flow Meter from SAMOA is suitable for gravity fed applications with a minimum flow of 20 litres per minute & has a very low pressure drop.

The meter allows to orientate the inlet and outlet in four different positions.

Maximum working pressure: 10 bar

Flow range: 20 to 100 litre/min

Precision after calibration: +/- 1%

The SAMOA Polaris Series transfer Pump is a self priming diesel pump with self-adjustable vanes, Pump body made of cast-iron with rustproof treatment, rotor of sintered steel and vanes of acetal resin.  The pumps include a by-pass valve and a built in filter with easy access for cleaning.  The pump can be mounted vertically or horizontally and has 1.8m cable with plug.

Inlet/outlet connection: 1" BSP (F) or flange coupling

Maximum suction lift: 2.5m

Pressure: 1.7 bar

230v - 50hz - 3 amp - 500 watt

Electric AC motor with IP55 protection, allow continuous operation duty.

On/off switch and fuse.

The Husky Safe-T-Break® couplings are designed to disconnect the refuelling system, so that the hose breaks off from the pump in the event where a vehicle drives off with the nozzle still attached to the fill point.

These Safe-T-Breaks® stop the whole pump system being pulled away from the installation, therefore preventing fuel from spilling out onto the forecourt. This type of Husky breakaway coupling is re-usable, and can therefore help to prevent damage and fuel spillages again and again. Watch this video on how to reconnect the coupling. 

The standard models of the Safe-T-Break® couplings are designed for use with diesel, with a 1" ATEX approved version available for petrol.