Samoa Polaris 50 Diesel Transfer Pump Kit

The Ultraflow Cast Iron Rotary Hand Fuel Pump is an economical and simple solution for the manual dispensing of diesel and oil primarily from a drum, but also from other types of storage tanks. These rotary vane type hand fuel transfer pumps are a popular choice for transferring fuel when cost effectiveness is important, when only small quantities need to be dispensed at a time, or when no mains power is easily available. This manual diesel transfer pump is supplied with a 2” M BSP drum adaptor and three part rigid suction downtube.

The Groz Fuel Tank Filter is designed primarily designed for gravity flow conditions, although it can sometimes be fitted to a pump dispensing system depending upon the flow rate. Thanks to its clear plastic bowl, this diesel filter allows the user to identify any debris or particles within the fuel. It also has a drain point at the base of the bowl for the easy removal of filtered contaminants.

These fuel storage tank filters for diesel should be changed when the flow rate of the system starts to slow, as this may be an indication that the filter is full.

This high quality diesel transfer pump from FMT Swiss AG is manufactured from shock resistant Die-cast aluminium with extremely small tolerances. The small tolerances of this pump allow for great suction & pressure performance.

Fitted with an on/off switch, integral bypass & siphon protection, this 230v transfer pump is designed for a long service life and is capable of a 5 metre suction. The pump head is also rotatable 90 degrees in any direction, which gives the pump flexibility to be used in a wide range of applications.

This transfer pump from FMT has an encapsulated electric motor, which in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof.

Specification - 

Encapsulation of the electric motor, 

1.8 metre cable

1" BSP Inlet / Outlet

Self Priming Vane Pump

100 Litres per minute maximum flow rate

Up to 2.2 bar discharge pressure

5 Metre maximum suction height

Suitable for Fuel oils & Diesel

230v 50hz

Thermal Protection

IP54 Safety rating

FKM/NBR Seals

3 year warranty

he SAMOA Polux Series of DC Vane Pumps are high quality self priming pumps manufactured in Spain. These pumps come in either 12v or 24v, with flow rates of 40lpm or 60lpm (Depending on model). The pump body is made of cast-iron with rustproof treatment, rotor of sintered steel and vanes of acetal resin. The pumps include a by-pass valve and a built in filter with easy access for cleaning. The pump can be mounted vertically or horizontally, has a carrying handle and 2m cable with crocodile clamps.

The Polux pump kit version has the additional benefit of coming with all fittings required for portable diesel transfer, including a Fuel nozzle and Delivery hose with the option for 2 metres of suction hose and a flow meter.

Inlet/outlet connection: 1" BSP (F) or flange coupling

Maximum suction lift: 2.5m

Pressure: 0.8 bar

Electric DC motor with IP55 protection, allow intermittent operation duty with maximum cycles of 30 minutes.

Voltage: 12v

Options

684 512 - 40lpm - 4 metre delivery hose, manual nozzle

684 951 - 40lpm - 4 metre delivery hose, manual nozzle & 2m Suction hose kit

684 514 - 40lpm - 4 metre delivery hose, manual Nozzle, 2m Suction hose kit & digital flow meter

684 461 - 60lpm - 4 metre delivery hose, automatic nozzle

684 465 - 60lpm - 4 metre delivery hose,automatic nozzle, 2m Suction hose kit & digital flow meter