Samoa Flowstar DC Portable Oil Transfer Battery Pump

The H Series Compatible Quick Release Couplings are general purpose, plated steel hose couplings. They instantly seal upon disconnection to prevent any leakages, and benefit from a smooth jet valve design with a safety pin system to prevent the accidental disconnection of the quick release couplings. The coupler and nipple are sold separately, and are compatible with Snap-Tite H and US-MIL-C-51234.

The Piusi A280 High Speed Diesel Nozzle is designed for the high flow refuelling of large vehicles and plant and agricultural machinery that take longer to refill due to their tank size. Thanks to its large bore spout, this is the highest flow rate automatic fuel dispensing nozzle in the Piusi range, and also benefits from a large hand opening to accommodate for the user wearing gloves. This fuel pump nozzle has an automatic shut-off mechanism that prevents the nozzle from dispensing any further fuel once the vehicle’s tank is full, therefore stopping an overspill.

New from Piusi is the P60:1 Booster Air Operated Grease Pump range; part of their Italian manufactured offering to the lubrication market. These air operated grease pumps have been specially designed to ensure high performance and durability in heavy duty garage and workshop environments.

The P60:1 Booster is ideal transferring grease and high viscosity oils at high pressures, over both short and long distances, thanks to the high compression ratio. There are three models of this air powered grease transfer pump available depending upon which length of suction pipe is required, to correspond with your drum size.

- 470mm suction pipe for 12.5kg drum
- 730mm suction pipe for 50kg drum
- 940mm suction pipe for 180kg drum

The SAMOA Polaris Series transfer Pump is a self priming diesel pump with self-adjustable vanes, Pump body made of cast-iron with rustproof treatment, rotor of sintered steel and vanes of acetal resin. The pumps include a by-pass valve & can be mounted vertically or horizontally and has 1.8m cable with plug.

Inlet/outlet connection: 1" BSP (F) or flange coupling

Maximum suction lift: 2.5m

Pressure: 1.7 bar

230v - 50hz - 4.6 amp - 750 watt

Electric AC motor with IP55 protection, allow continuous operation duty.

On/off switch and fuse.