The MT Profil Fuel Tank Float Gauge from Afriso is a small mechanical clock gauge for measuring the tank's contents by a float that sits on the fuel and goes up and down with the level. Whilst also popular for diesel storage tanks, it is most commonly used as a domestic heating oil tank gauge. The small display shows a scale of Empty 1⁄4, 1⁄2, 3⁄4 and Full for factory calibrated versions, allowing the user to quickly identify the approximate fuel tank level.

This oil tank level gauge is available in different versions depending upon the specific height of the fuel tank, or there is an 8'0 adjustable version. The 8'0 adjustable version of the MT Profil oil tank float gauge displays the level reading in cm, and has a reversible display which goes to 150cm max on one side, and 250cm max on the other.

These oil tank gauges are supplied as standard with 1 1⁄2” BSP Male for easy fitting on the top of the storage tank or drum. If your tank has a 2" BSP hole, you can fit this gauge by purchasing a 2" x 1 1/2" reducing bush. If your tank has a vent hole, you can connect the gauge by fitting a 2" barrel nipple into the hole and adding a combi vent cap which has a 1 1/2" BSP thread to screw in the gauge to prevent an additional hole being drilled.

The Piusi Grease Bucket Lever Hand Pump is a lever hand pump fitted to a 16kg capacity grease bucket container, designed for the cost effective dispensing of small quantities of grease. The sealed lid on this grease transfer pump keeps the grease free from contamination but can be unscrewed to refill the container from a drum. The integrated carry handle makes these grease bucket pumps easily manoeuvrable around the workshop and a foot plate ensures the pail is kept sturdy whilst the pump is in operation.

These Piusi pumps come with 2 meters of high pressure delivery hose, 4 jaw connector and ball valve to prevent leaking when not in use and come complete with follower plate and suction pipe.

The Piusi K44 Fuel Pulse Meter was developed to accurately count how much diesel has been used, using a nutating disk system. This Piusi diesel pulse meter is suitable for use in industrial applications where fluid delivery control is required at highly accurate levels. They can also be used in conjunction with a non-commercial fuel delivery pump either part of or externally inline. The K44 fuel flow meter with pulse output is a cost effective solution to measuring the flow of fuel up to 9999.9 litres at a time. Thanks to their wide flow range, these Piusi flow meters are compatible with a range of pumping installations.

The Fill-Rite nutating disc mechanical flow meter, 807C features a large & easy to read 3 digit display with a 6 digit totaliser. 

This 3 wheel mechanical meter is suitable for transfer pumps with a flow rate of 20-75 litres per minute and is compatible with a wide range of fluids.

Certified to Atex EX II 2G C T6